talon p 24inch conversion prroblem
hey everybody
first sorry for my english i come from france so it s difficult for me to have a perfect language
i have ordered a talon p few months ago..
after that i have ordered a 24inch barrel..but bushing barrel are not the same and my origial talon p screw doesn t fit on my new bushing..
could you say me the good size?i know it s a grub screw but it s impossible to me to know the good size..
please help me
All Replies
Ioic,
I thought about it. The original Talon-P barrel is 12mm diameter. The 24″ barrel is 16mm diameter. So the 24″ barrel bushing holes are probably not as deep as the Talon-P barrel bushing holes? And the Talon-P frame to bushing screws are too long?
thanks coor
you will see that you 24inch barrel bushing is little different so all original talon p screw will not fit on you new bushing.. :whistle:
you need to buy airforce condor or airforce escape barrel screw
The screws are 10-32 size. What exactly is the problem? I also have a Talon-P and I have a 24″ barrel on it’s way to me, now. If someone else does not help you before I get my new barrel and figure out what you mean by “doesn’t fit my new bushing” (24″ barrel bushing), then I’ll reply with more detail.
- You must be logged in to reply to this topic.
The next thread to yours “microlite bullpup kit”, in that kit the barrel bushing holes are too shallow for the Talon-P screws. So, I used the shorter side-screw in the bottom and from a zinc-coated 10-32 screw I fasioned a shorter one for the side: https://www.dropbox.com/s/pw27vx2644droxl/10-32_screwdetail.JPG?dl=0