Talon SS-Edge compatability?
I’m new here so go easy.I live on a golf course at the outskirts of Tampa(drained swamp).My primary interest in the Talon SS was for pest control,and it’s been very effective on everything from rabbit to raccoon,even an unfortunate cottonmouth.My only complaint is about stock ergonomics.I was looking at the Edge and wondered how many high powered shots you’d get out of that tiny tank?Also is anyone hot rodding the Edge for FT?
All Replies
Viewing 1 replies (of 1 total)
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.
The ergonomics of both the Edge and the TalonSS are all wrong for FT. The tiny tank on the Edge would not give very many shots hopped up… and then there is the reg that would need to be reworked.
You’ll also find the Edge suffers from the same ergonomic problems as the Talon…
If ergonomics are your main concern with the SS, then there are two products that will help immensely. First is the WOK BUTT. This is an aftermarket butt plate made by one of the members here. Next is the E-TAC, a device that provides both cant and cast off to put the shooter in a more comfortable postion. It also incorporates a pressure gauge and a quick fill. Either of these items on their own will greatly help ergonomics, but put together they create a very natural and comfortable shooting platform.
Here is a pic of one of mine with both installed….
http://talonairgun.com/forum/viewtopic.php?t=11640
hope this helps.