TalonTunes Tank Adapter???
I have one of these TalonTunes Tank Adapters and so don’t have a fill adapter. I want to do the valve modification but need to remove the pressure first. I understand placing a couple of dimes in the adapter and slightly/ lightly tightening it is how, but without it HOW?
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
Just keep shooting……
Mmm, tough one but heres what comes to mind for me.
Measure from the tip of the tophat to the breech end of the barrel.
Try to cut a hard block of wood about 1/8″ longer.
Unscrew the tank one turn, place block between tophat and barrel, SLOWLY screw in bottle.
Might work. Use something soft so you dont damage any metal. Neither the barrel or tophat are particularly strong, so bending either is a possibility.
Maybe drill a tiny hole thru the wood, line it up so the air leaks into the barrel.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Thanks RiffRaff, did the trick. Just was worried about the stem. If it’s bent I’ll know who the blame 😆
I did shoot it,….. till three pellits are now stuck in the barrel 😉