Tank dump
Just wanted to ask you guys a question ,if I put a 177cal barrel on a 22 cal condor and turned the power wheel all the way on low would it shoot with out dumping the tank? Thanks for any help with this…
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
If it soesn’t work for you, try what I did, put the hammer weight/ spacer to the front of the spring. And turn down the power wheel a bit. That reduces hammer inertia but provides enough momemtum.
I succeeded where others failed. I went from 24″ .22 to 12″ .177.
Just order the return spring from AF and you won’t have to worry.
The bummer is that there is no easy quick change without a second tank setup. I thought it would be cool to have my .22 condor to hunt and then barrel swap down to .177 for punching paper in the city.
Good question. Probably wont because you wont be able to open the valve enough. Lower pressure might work also.
Just order the return spring from AF and you won’t have to worry.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
wait i dont get it. isnt valve of .22 and .25 is softer than .177 because of the softer return spring?