Tank fill hose
I have a ninja tank with 3000 psi adapter.
Ordered a fill hose assemble, it screws on to tank fine but no air will flow.
The thumbscrew stem on fill adapter seams too short & too large a diameter to depress the valve in the tank.
Anyone have any ideas ?
Thanks
Attachments:
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
What is the correct name for the fitting on this tank ? DIN, CO2 ??
Wandering why it requires an out of the ordinary long pin ?
Thanks
quote turbot:
I have a ninja tank with 3000 psi adapter.
Ordered a fill hose assemble, it screws on to tank fine but no air will flow.
Ordered a fill hose assemble, it screws on to tank fine but no air will flow.
The thumbscrew stem on fill adapter seams too short & too large a diameter to depress the valve in the tank.
Anyone have any ideas ?
Thanks
Fixed
http://www.paintball-discounters.com/universal-fill-adapter-airgun-long-pin/
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Wandering why it requires an out of the ordinary long pin ?
Thanks
Your tank has a 5/8″ paintball regulator with a 2900psi output. It uses a long pin adapter. Most paintball regulator output 850psi short pin adapter.