All Replies
Viewing 10 replies - 1 through 10 (of 10 total)
Mamcrackin
I am not aware of any diagrams of the trigger group. My gun had hardly any first stage and the second stage was a little heavy. Took me about 5 minutes and a few shots to adjust it.
I was hoping that the newest batch of Edguns came with a manual in English, oh well.
Later
I am wanting to get rid of the first stage……..Is there a diagram
anywhere that shows the trigger group?
Yes, The two screws behind the trigger. The closest to the trigger the 1st stage and the farthest the second stage adjustment. Turning them clockwise increases trigger pull and counter clockwise lessens it. You do not have to remove the stock to adjust. I liked my first stage but adjusted the 2nd a little, not much
Later
later
Have you figured out how to adjust the trigger Tach?
Anyone know of an English version of the manual yet ?
later
ok, i think you have to go to the russian site first and register then you can go to the usa site.
try this:
http://edgun.ru/forum/index.php?
on top click: pernctpaunr
next page bottom: check the box and then click pernctpaunr
next page: the name your going to use as you login name
next box: naponb is your password, twice to verify correct
next box: your email address
next box: wite 153 (anti spam)
next box: your full name
next box: check box boxes on the right, just to say it ok for moderate to contact you
the next box: is for USA time zone, just select which ever
next box: bottom right 3APE ( is enter)
Thanks that helps a lot! Now I can at least look around in the Edgun forum. I’m still having trouble registering. I’m checking the box to show I’ve read all the rules buy when I hit the register button, it just takes me back to reading the rules all over again. I am tired right now so I might just be missing something. Let me know if someone figures it out.
try this, hope more people use the site, can not find anyone on there
It’s hard to navigate because a lot of it is not in English. I cannot figure out how to join the forum because I do not understand what the instructions are saying or what the categories are. This is the link to the Edgun forum.
Viewing 10 replies - 1 through 10 (of 10 total)
- You must be logged in to reply to this topic.
I am not aware of any diagrams of the trigger group. My gun had hardly any first stage and the second stage was a little heavy. Took me about 5 minutes and a few shots to adjust it.
I was hoping that the newest batch of Edguns came with a manual in English, oh well.
Got it figured out oldgoat….Tachdriver gave me some info….I backed out
the 1st screw behind the trigger and started screwing in the 2nd screw
until the gun would not cock any more then backed it off a little….Just
one stage now….Perfect….