All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
I used to have the same problem with my CO2 adapter until I took it apart and added an extra spring to it.
Yup, AF co2 adaptor. only problems i have had Is It tanks dumps or tries to alot. I find you need to get the valve spring tension just right. Too loose and It will leak slowly after a shot or just start to dump the contents of the tank. Too much tension and you compromise on power.
I don’t know TBH. Try asking Matt. As long as the threads are the same and It’s rated to that pressure I can’t see why not.
fusion are you also using the AF co2 adapter and
have you had any problems with it?
Do you think that reg can be put on a 4,500psi bottle?
I know my expert HPA tank and ANS reg Is very consistant. Usually around 3-4 FPS variation but when I bought It the max output was 1400 PSI. Apparently the Expert HPA Brand Regulator Is available up to 1800 PSI now.
Sounds great…Anything said about when regulator testing will be done and information on shot strings and FPS SD’s will be posted?
What are the available output psi’s?
How much psi can his new regulators handle?
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
I would say winding In the spring retainer would have the safe effect as adding another / longer spring and just as important, the same affect on power.