Q:

Thinking about a .25 SS with Condor valve

What performance can I expect out of it with a 12″ barrel, condor valve or one of Tonys or R&L valve? fpe, accuracy, shot count….

Talon/Talon SS

All Replies

Viewing 10 replies - 1 through 10 (of 10 total)

Lee,

Here’s the shot string from Tony’s initial test from my new Talon SS with one of Tony’s new one piece hi-flo tophats, tank tune, and one of his specially made 14″ .25 caliber LW barrels. Just got it delivered last night. Perfect velocity for what I wanted for the JSB 25.4gr pellets and 48+ FTE. Tank was filled 3000 PSI. I usually don’t fill to 3000 psi but who am I to argue with the master. PW on 6.

Harry,

sent you a pm with my email info.

quote slow:

Harry,

what sort of shot strings does your setup give?

Shoot me an email address and I can send you a excel spreadsheet I did back in December…. Peak Fps for this string was 921fps… My other TSS Peaks close to 940fps and keeps the first 10 shots within 10 fps.. after that they drop about 2-3 fps a shot

Seems that 940 fps is about as fast as you’d want to push a JSB for accuracy from what I’ve read.

Harry,

what sort of shot strings does your setup give?

I have (2) TSS in .25 with modified Hi-Flo valves and 95gr hammers. Best you can expect is about 945 fps with Jsb kings. The short barrel seems to handicap it. For what I use them for, it is more then enough power to reach out and touch the raccoons that wander through my yard.

Should be Talon SS length plus the shroud, I gave Tony specific specs and told him to make the shroud as long as necessary, which he said would be somewhere around 9″ so overall length should be around 41″ including Wokbutt maybe a bit longer. It would be short if you plan on no shroud but it will be loud without it

quote LTLurker:

On Monday UPS is delivering my new TT Talon SS with one of Tony’s 14″ .25 cal barrels, one piece top hat which is a Condor Valve. I’ll probably be posting chrony results after I get It or It might come with testing and chrony data already performed from Tony so I can post that immediately.

Cool, I’ll be looking forward to your results. How long is the gun? I’m thinking of a short light 50 fpe thumper.

On Monday UPS is delivering my new TT Talon SS with one of Tony’s 14″ .25 cal barrels, one piece top hat which is a Condor Valve. I’ll probably be posting chrony results after I get It or It might come with testing and chrony data already performed from Tony so I can post that immediately.

You can go two ways with Tony’s valves. Get the standard condor valve mod or have him do the mod with the addition of one of his new single piece top hats which is what I did.

You’ve most likely seen this:

http://talonairgun.com/forum/viewtopic.php?t=19217

I should have one from Randy in a couple of weeks, shall try my best to give a report once I manage to figure the gun out.

Viewing 10 replies - 1 through 10 (of 10 total)

  • You must be logged in to reply to this topic.