To buy or not to buy

Dear Brother Avg;

i would highly vote to Edgun, :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8: :8:
however i believe both are very good, based on those guys who they own both of them….

I know and you all knows that i don’t own Cricket, but this doesn’t mean that we cannot speak or comment on it, because i have read some topics and i rather know how it works? regarding the Edgun, as you know i own one, also i have read topics on edguns as well, and still i cannot tell that i am an Edgun and Cricket specialist,

anyhow, Edguns as has more shot count, power, efficient and i believe there should be no argument on the sexiest design of Edgun, the accuracy they said almost the same, the durability my Edgun made just like the Russian Tanks, :8: :8: i am very satisfied with the finishing, accuracy, shot count, power, efficiency and the design as well, So, if i were you i would go and without any hesitate i would buy the Edgun either the Long or Standard version, the caliber, this is depends on your suitability.

Brother Avg, please consider my above written as my very personal point of view, you can even not read it, if you don’t interest just ignore it, i think i didn’t say any bad things on Cricket which is never i will.

Demp; shooting 50,000 pellets is really sounds like very good, and especially without changing even the o-rings ❗ Yes, i believe that.

Dear Avg; My Brother Oldgoat, advised me to spare only the air valve rod, just in case, i don’t know where do you live, anyhow the most important is you are not living in Iraq 😯 , either in US or Europe or somewhere? you can get it easily, however my brothers Oldgoat in USA and Sir Ville make me feel that i am living in US and EU, they are ready to help me at any time, Oldgoat has sent me a degas tool and spare o-rings for free, So, you don’t worry go a head …. you will get the parts when you need them for sure….

Never had an issue getting spare parts within a couple weeks by emailing Tony or Ed directly.
Not that I’ve needed them. I ordered simply to have years down road as parts eventually wear. Orings and air valve rod are really only two parts that should go over time. Possibly washers inside reg.
For what it’s worth my Ed 22 long has over 50k shots and 25 long over 12k with all original parts including Orings.
As far as tech support, these guns are super simple to work on. Anytime spent here and you’ll know all there is needed to know.