Tool for Veles disassembly?
What tool is available to fit in the two holes in the front of the Veles air tube that will allow one to remove the fill probe port from the air tube? Thanks.
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
Round needle noses pliers or tweezers would do the trick.
Drain all the air out and turn it by hand.. they are normally hand tight. If not use two pin punches with a levering tool such as a screw driver between them.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Thanks for the replies guys. A small pair of curved needle nose did the trick. Lots of grease inside!