top hat question
i have a stealth so far my mods are a 24 inch bsa barrel new brass hammer just how far out should i have the top hat if i where to screw it all the way in how many turns out for max ftlbs my pellet choice are bisley magnums about 21 grains in weight
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
There is none, every Gun will be different. This procedure works for the U.S. models. The U.K. Stealth does not have a Power Wheel so disregard that step. http://talonairgun.com/forum/viewtopic.php?t=249
whats the standard ?
Tends to be the further out the more air it will flow. Though it can start doing odd things if you wind it to far out or in for that matter. Also be careful as soon as your pellets go transonic accuracy will normally go all to pot. The UK valves are a fair bit different to the US ones also and there are a few different variants on both. Every gun is different as well so your best giving it a try and see what works best for you. I would not wind it all the way in but rather start from standard and then adjust from there.
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Try 0.070″ and go from there.