Tophat/valve stem port and polish
Decided to do this after watching Pandemic’s video, set my tophat at .100…. After grinding and polishing. ordered a chrony today
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
great tutto
Yep! WAY too FAST! Terrible Group. Pellets just Won’t shoot accurately at those velocities. and one of the reasons AG Bullets are becoming so popular.
Knife
Tonight’s data after playing with new Chrony
1139
1051
1045
1040
1036
1031
1024
1021
1013
1013
2.5k-2.1k psi
18.1gr
Hat gap .069
Power wheel at lowest setting
Seems like it’s using more air than before, I may close the gap alittle more
Any input would be golden
So after going sonic with 18 gr JSB’s, at lowest Pw setting I adjusted the top hat back, so now I’m sonic at PW #4 with 2.6k psi. I’m estimating my FPS is approx 950 by using Chairgun app and POI. With a fill of 2.6k to 2.1k I got 35 shots with accuracy still holding. Gun is zero’ day 45yds. 8mil dot HO at 20x this is my 110yard group, now I’ve only had this gun a week so I’m still need to work on technique for these long range shots. Chrony will be here tomorrow so I can do more fine tuning. Also ordered some kodiak 21gr and H&N 21gr cudas. Also ordered some Predator Metalmags to play with.
Shot the condor this am, lowest power, 18.1 JSB, went sonic, going to start backing the top hat back in. Fun!
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Now you just have to play with some orings to tame that puppy down