Trigger Modification Picts restored
Thanks to Yellow Ninja for sending this to me. I did what I could and got them posted again
All Replies
Viewing 7 replies - 1 through 7 (of 7 total)
Just a thought.
H 😯 😯 T
That is a great idea!
I will go back 5 years in time and ask Yellow Ninja to do just that.
Hang on let me get in my TARDIS. I will be back shortly
OK I am back. I got lost inside the TARDIS for a bit. It is much bigger on the inside then it looks.
So here is your link Hoot
http://talonairgun.com/forum/viewtopic.php?t=132
Just a thought.
H 😯 😯 T
it has been for years H 😳 😳 T
I told you it was a good idea!!!!!
H 😯 😯 T
Just a thought.
H 😯 😯 T
it has been for years H 😳 😳 T
When asked, and after conferring with their technician, Airforce responded “neither of these holes have any purpose on the TSS”. Hmmmm?
That is a classic, and fairly user friendly, modification, and would fit nicely as a sticky in the reference section.
Just a thought.
H 😯 😯 T
I posted a question on the Talon/Talon SS forum about the 2 threaded holes in the bottom of the frame on the newer Talon SS frames, just forward of the trigger.
Tony responded with this>>
They [Airforce Airguns] are using the same trigger bar for all rifles.
You can use a 10×32 set screw in the hole closest to the trigger to adjust for overtravel.
Viewing 7 replies - 1 through 7 (of 7 total)
- You must be logged in to reply to this topic.
HOW DID YOU DO THAT????????
H 😯 😯 T