Trigger pull
Just got my new Talon SS from Tony,sweet but I’m still wanting a lighter trigger pull. Has any one installed or used AOA’s SuperSear. Open for ideas…. 😀 Thanks for the help….
All Replies
Viewing 9 replies - 1 through 9 (of 9 total)
😎 Hey thanks for all the info. I’ll look up the trigger mod for the screws and do that first. 💡
x1 what Wok said, I’ve got mine set sooo nice it’s great! If your TT didn’t come with Wok’s trigger shoe get that and do the mod. It’s pure finesse.
If you have the trigger mod screws installed you can adjust it to the length of pull you want and over travel.
You should have a short 1st stage and the trigger should stop right after firing.
If the trigger pull is still more then you want you can find a softer spring for the trigger bar to lighten the pull.
But usually adjusting the set screws will give you a nice short trigger pull that is good for a hunter.
WalkonKing how do i adjust the trigger????
How light do you want your trigger pull to be?
If you adjust your trigger a bit it, it can be very light. In fact to light for a hunter.
The sear is not needed to get a light crisp trigger. A slight adjustment might be all you need.
sans the aoa sear, you can make these triggers crazy good, if theyve got the older intermediate block and some patience…
Double post for some reason.
Yes, I have installed and used it and it works great. Definitely a improvement over the stock trigger. I had to fiddle with it a bit to get it adjusted to my taste but love how it improved the trigger pull. I have another brand new that I’ll sell you for $40 shipped. I’ll send you my cell number via PM ifif you want to contact me
Viewing 9 replies - 1 through 9 (of 9 total)
- You must be logged in to reply to this topic.
Hey 1OG2,
Check to see if you have 2 threaded holes in the frame just forward of the trigger. The newer guns do. If so, a 10/32 set screw in the forward hole will address the overtravel. Half the job done.