Two New Pics…Marauder Conversion Kit Near Completion…

Prototype, before anadozing. Take six inches off the barrel and cut the shroud to extend tip to tip with the shortened air tube, and that will be my carbine, all in black. 36″ OAL. my grip will slide all the way up to the trigger guard, as shown in the other two pictures.

A small pic of the finished anodized frame:

I’ll get some larger pics soon.

$279 fully complete with grip, 6 position butt stock, full length picatinny rail under the forestock, rail covers, and all the hardware. All I need is the trigger guard from my stock. This is a drop-in kit. Drop in the Marauder, and tighten one screw.

I’m having my barrel cut down to 14″ and extending tip to tip to the air tube. I’m going for a Mrod full carbine, 36″ in OAL.

It’s coming along, so I wanted to share this with you. The guy doing this is a CNC machinist, and owns three Marauders. He wrote the software for his stocks. He wanted to build a carbine, a rifle and a tricked out exotic wood enhanced aluminum frame. Once he published the pics, he got so much interest, he decided to offer a Marauder Kit, for rifle or carbine. All with drop in parts, like mine.

I’ll post pics once mine gets assembled and shipped. He’s early in development/anadozing of the kits, and needs to cuts some barrels to be ready for orders. He’s going to rechamber the stock barrels, clean them up, and do a bit of magic to enhance performance. He’s hoping for similar results to LW in his kit. We’ll see.

You can reach him at daskinetic@gmail.com if you own a Marauder and want to get in line early. He’s also going to make a DIY wood kit to come later. The wood is beautiful, but my ‘nads shrivel at the sight of that black rifle kit, and a chopped Marauder, with most of the air tube left. Ought to shoot rings around the Mrod pistol!

Hoot…getting excited 😯