Vavle to low?
I read some where here that the valve can be to low, is this what thy were talking about? 
If you can not see it it is enough to catch a finger nail on.
All Replies
I don know but turning that tophat in will most likely save u some air
Ok thanks. That is mostly what I wanted to hear. So long as not to worry
some retainers seat deeper than others. As long as it is shooting fine, don’t worry about it. just complitates measuring the tophat adjustment a little because the retainer is below flush with the body.
Could be me but it seams every 4th or 5th shot goes right of poi. I do not go over 200 bar for air refills.
What problem are you having with your gun?
Oh and also I have noticed in other photos and talon tunes that the valve seats nice and flush.
Is this something that really hurts accuracy? Do I empty my tank and back out the valve?
I am also looking in the QR forum for more help.
- You must be logged in to reply to this topic.
I was about to mention that. It looks like you have your set to around .080 or higher, you should try turing it down to about .070