Vented Barrel bushing
Would any of you machinist guys entertain the thought of selling me a vented barrel bushing for a AF .22 24″ barrel? And do the bushings on the 24″ barrel work on an 18″ barrel?
All Replies
Viewing 6 replies - 1 through 6 (of 6 total)
Easy peasy with a drill press and a compass.
Just take your time and measure twice.
Av got a bin full of things ive only measured once.
Sean
Great info..Thanks
It’s a piece of cake to do if you’ve got a drill press. If I was to suggest anything, I’d say start with a small drill bit and then work up through a couple larger bits until you get the hole size you want.
Ahhhhh Haaaa!…Thanks NA……….
If you want a ready made one ask Tony at Talontunes his link is of the front page.
Or if you are capable of using basic shop tools you could make it yourself, a very easy project.
Both 24 ” and 18″ are the same in regards to the bushings.
Nigel
Viewing 6 replies - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
blodnob did you only drill 5 holes?