Veteran 25 cal valve port tuning
Wondering if vendors/dealers like Tony could bring in parts like the valve port, extra stems and springs.
Machinist also, Dman or John could make them up as we go forwards ……….
Seeing the race to shot JSB Heavies 34g flat out, but don’t want a permanent mod and a user could swap out back to factory.
~ Greg
All Replies
Viewing 4 replies - 1 through 4 (of 4 total)
Thanks Motor head
Very good information to have , next time a venture into the gun.
Slow and steady, I read you LOUD and CLEAR.
Mike
Pretty standard stuff there being a common modification to make on most any conventional poppet valve.
While flow is increased along with potential of making more power ( Given Reg pressure & plenum volume is enough ) the gains made are easily dialed back by decreasing HST to desired level.
IMO a mod to do with no worries what so ever of needed to reverse it later or requiring much in service parts. OEM stem can be pulled from poppet head & reused with PEEK etc …
Good mod to be doing with correct tools and a steady hand :biggrinn:
Very, Very good question, May have to E mail the guys them self to get an answer.
Mike
Viewing 4 replies - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Like the Anti double feed feature in the Veterans and wondering if they will offer an upgrade for the Mutants ?
Parts in the receiver or a bare bone one would work.
Finding that I need to be more carefull with having the 2 types ……….
~ Greg