Vulcan2 .30cal twist rate
Hey guys. My friend deono has this model and is wondering does anyone no the twist rate on the barrel. And also do these barrels need much cleaning. All input would be great thanx.
All Replies
Viewing 1 replies (of 1 total)
Viewing 1 replies (of 1 total)
- You must be logged in to reply to this topic.
Put your cleaning rod with a patch or a copper brush into his barrel. mark your rod where it leaves the barrel with a piece of masking tape and using a pen, draw a line on the tape. slowly pull the rod out until the pen mark is in the same spot where you marked it and measure the distance from the end of barrel to the tape and that will tell you the twist rate.
1 in 12″, 1 in 9″ etc…..