What is the process to match different tanks? Can it be done
Okay here are some numbers from 2 different Condor tanks (new style valves). I want to match the tanks to a similar bell curve as tank #1 delivers better accuracy. I have tried different fill pressures and tophat settings but am I missing something like setting the valve inside the valve body?
Any help would be greatly appreciated as I have never disassmbled a Condor valve.
Thanks
Randy
Tank #1 2400 psi fill PW0 .054 tophat .22 Kodiaks: 90 gram hammer
967.4 -1
991.4
1010
1012
1014 -5
1016
1015
1019
1018
1020 -10
1019
err1
1016
1017
err1 -15
err1
994.1
987.1
987.9
982.3 -20
974.1
966.3
969
962.9
959.6 -25
957.2
946.6
948
949.6
937.7 -30
Tank #2 2200 PSI
1016 -1
1016
1010
1007
1006 -5
996.4
997.2
992.2
987.9
983.3 -10
981.5
975.8
978.6
973.1
969.9 -15
968
962.4
957.8
956.9
955.1 -20
949.1
942.7
942
926.8
928.4 -25
924.9
931.2
918.2
923.7
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
Since I went with a heavier hammer I have found no spring tension is more consistant as adding tension actually lowered the velocity and made the velocity not as close????
Randy
I have 4 talon tanks matched . Three were with in just a few fps difference and the forth I ended up just filling it 100 psi more . Have you tried the P.W as well .Marvin
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Your one lucky fella!
I have two tanks and at the same TH setting the fps are off by 300-500… To get it anywhere close I have to really gap one of the tanks.
I think my hammer is not lubed like it should be so that makes some difference.
To get them to work the same I have to up the PW by four (major numbers) to get them close….