Which height scope mounts for edgun??

19 I used lower mounts on mine! I usually always stay with the old school! closer to the barrel the better! One thing to keep in mind and can be changed later, is if Ed comes out with his magazine kit you would need clearance for the magazine! but if it was me I wouldn’t worry about it, seems to be long in the offering! for now! If you allready have a scope for it, figure out what brand rings you like then get a measurment from the manufacture’s web sight from bottom of ring where it attaches to rail, to the bottom of the ring itself! where the bottom of the scope will lay, From there what I do is cut a couple pieces of scrap wood close to that height, lay them on the rail and then lay the scope on the top of the wood pieces you made! this gives you a great way to see how high your scope will be and let you look through the scope to see if you like it or not. If not go to higher or lower wood blocks until you find the height you like!