why lelya regulator is separated when disassemble
When I pulled out the regulator, but only stem and air chamber tube pulled out. The regulator remained in the air tube. I have to push out with a rod. see Eanest video https://www.youtube.com/watch?v=Te2dM52BQbI.
I reinstalled them together tight and shot some, then disassemble again, found the front part was separated with the regulator again. Have anyone had the same problem or know what caused it?
All Replies
Viewing 3 replies - 1 through 3 (of 3 total)
Thanks. That makes sense.
It’s because the way it is put together. You have to unscrew the bottom part of the regulator that is treaded the same direction in the air tube and regulator reservoir. The O ring grabs the air cylinder wall and they separate when you take them apart. Happens to me also.
Viewing 3 replies - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Yes this is normal on Veles as well.