Wok action
Hey guys, look what I got yesterday 😮 😮 😮
Thanx WOK you the man
SAW
All Replies
someday I’ll get me one of them wok-butts and a grip adapter…(after I get my gun 😉 )
Sweet!!! After the dust settles from this move.(almost finished). I need to get one of the grip adapters and the trigger guard. Looks really sharp. Looks to me like you could put a set screw in the adapter for trigger over travel. 😀
Mike
WOK, I like the adapter so much, I would like to purchase a trigger guard, adapter combo for my talon broomstick.
PM me with availability or post direct.
SAW
The grip adapter and angled thingy look great with the AR grips. I’ll have to get a set. I bet they feel nice too.
Yeah, I know already… take a close look at the front of the dishwasher in the first pic, up at the top of the stainless panel. See those two curved dents?
Lesson learned… don’t hold a plate by the edge and use it to push the door closed!
😯
Sometimes it sux to be me…. 😆 😳
Oh….Let me see. I will have to get back with you. I do know it is a 20 count thread maybe 1/4.
Take the little bolt with you and they will have a thing to size it with. 😀
I will check when I get home tonight
I meant the grip screw, I need to buy one that is 1″ for the grip I have.
GTBJ – Just replace all your other screws with Stainless and then it will match.
That is a 10-32 SS bolt if you want to replace it.
Just be aware the black ones like to rust!
You will have to shorten a replacement a bit on the grinder to the right length. 😀
Since it does not get touched you could cover with black fingernail polish or even paint if you don’t like the stainless look.
Thems some fancy lookig rigs you guys have.
Note to Buzz: Bet momma would open up a can of whoop ass on you but quick if you put a pellet thru her beautiful stainless steel appliances. 😛 😆
Wok, what size threads did you tap the adapter?
By looking at some of the grips I can see I will have to powder coat the adapter inside the grip. On the stock grip I used the adapter fit totally flush at the top.
😆 Scrunchy! Took me a second to figure out what you were talking about.
That’s the “lock” ring from a milk bottle cap.
I usually leave the gun loaded (but decocked).
It’s there to remind me that the gun’s loaded, so I don’t get stupid and blow out the doorwall window (again) 😯 😆
It’s split in one spot, so all ya gotta do is pull on it and it comes right off.
saw’s Flagpole SS and buzz’s Scrunchy Condor are some of the more unique mods I’ve seen 😀
- You must be logged in to reply to this topic.
Those grips and trigger guards are SWEEET! Nice pics and rifles! When the wallet permits I’m gonna have to get some!