Visit Talon Tunes
Updated on September 11, 2007
y
Participant
September 11, 2007 at 7:32 am
Q:

Workshop Pictures

Show off your Shop. Feel free to give us a description of the equipment you have !

Mods/Machinists

All Replies

Viewing 15 replies - 16 through 30 (of 82 total)

1 2 3 4 5 6
upthehill
Participant
October 10, 2012 at 7:15 pm

My workshop (effectionatly known as ManVille) is undergoing some renovations, both inside and out back.

I built some more bookshelves and work benches inside

and work continues on my 401K wall

and out back I used to have a 4×4 platform with a clay thrower connected.
it’s becoming a 10×10 platform, still with the clay thrower.
in the background are metal gongs setup randomly between 50′ and 250′ some going into the trees beyond.

this used to be a 1 bedroom guesthouse, that I commandeered as my man cave. it has a 3/4 bath and small kitchenette for when (not if) I finally do something that pisses the boss off.
the garage downstairs has the compressor, drill press, bead blast cabinet and paint booth, etc. where I strip and duracoat old guns and get them working again.

rogerx
Participant
June 23, 2011 at 8:06 am

WOW the knives are so cool. and I like it, I’m just new here and I’m a knifeholic.

jamcarz
Participant
February 12, 2011 at 8:27 am
quote justforfun:

Those are some great knives you make. Would you post a photo of you cutting out the ivory?

Roy S.

quote knifemaker:

Here is what I do with them. I start with 6 ft. bars of Jet Turbine Steel ordered directly from the manufacturer. These are a double hollow ground “Fighters” in Ancient African Bull Elephant Ivory. [/img] And these in Ancient Mammoth Ivory. [/img]

Nice knife. It is nice to meet up guys like you I also made a knife for myself try to check this one.

MY HUNTING KNIFE….. 😀

dogwood
Participant
January 2, 2011 at 10:20 pm

A little comparison between the X2 and G0704

just incase you need to mill a pepsi can 😆

dogwood
Participant
June 28, 2010 at 9:46 pm

Shop space at the new house, mill still in pieces in this photo, shop is separate from the house and fairly well insulated so noise shouldn’t be a problem

😎

justin
Participant
June 27, 2010 at 1:35 pm

Yes guys, I can say that having something that can help you to protect oneself. Very nice pictures.

knifemaker
Participant
January 25, 2010 at 1:25 am

Huh???

What does this have to do with our shops??? 😕

brian1
Participant
January 22, 2010 at 6:38 am

* NOTE * (Before getting slammed here, Texas hunting laws do allow hunting over a baited area.)

Is there a possibility that Texas don’t allow hunting in their area?

knifemaker
Participant
November 16, 2009 at 3:55 am

That looks like the flight deck of a carrier compaired to my paddle boat of a shop! 😀

Mike

yel01z06
Participant
November 15, 2009 at 9:45 pm

it has been a while an some changes happened in the shop so i figured i would update some pics




fastfreddy
Participant
October 19, 2009 at 7:31 pm

Want to see my shop? you guys are killing me with these shops. (not that I would know what the hell to do with the machines anyway) 🙂

I know I know… it’s quite impressive no need to tell me 🙂

metal-head
Participant
September 23, 2009 at 12:51 am

Arbor press with interchangeable snouts maybe?

the-machinist
Participant
September 23, 2009 at 12:44 am
quote fishin_rod:

This is my small corner, it sucks having to leave room in the garage for other stuff. Its small but effective. I will have to make more room when I get a mill.

what is the big red contraption beside your drill press??

kingpin
Participant
September 23, 2009 at 12:21 am

nice workshops guys, but ya got to just love thosa knives. always wanted a custom knife. kingpin 😀

knifemaker
Participant
July 15, 2009 at 4:30 pm

I bearly have enough room in mine to walk around! 😆

Viewing 15 replies - 16 through 30 (of 82 total)

1 2 3 4 5 6
  • You must be logged in to reply to this topic.

1 Comment