Yellow Steve Has Known Of Bobcat Problems
I have been following the problems with Bobcats and they have made the Edgun issues seem mild by comparison. Apparently, many of the regulators have leaked among clipping and other issues. Looks like Steve’s bias information constantly in favor of the BCs despite knowing of issues.
Finally, AOA was forced to come out and basically issue a recall which has been a long time coming once they figured out that problem (or some owner did). Too funny. 😆
http://www.network54.com/Forum/79537/message/1392101789/Bobcat
All Replies
Viewing 14 replies - 1 through 14 (of 14 total)
Coda – i´m pretty sure. I can check again tomorrow to confirm this but last i saw her she looked like one of them Harpy Eagles. Those winged bastards are probably many things but i´m pretty sure “Hot” isn´t one of them. 😯
You sure that reception lady isn’t kind of hot? 😯
What bugs me is Steve and Yellow gang knocking the Edguns while knowing the Bobcats had problems. It reminds me of the Liberal media – you know better than to believe anything…
People here are rabiatly protective for the brand they own – and for a good reason too, as just mentioned – but negating eventual problems doesn´t help no one , except the maker/seller of the Gun. I try (i use the word “try” with caution here) to stay objective when comparing different brands and models and i´ve actually learned a good deal about the brands Cricket & EdGun.
I own no FX and probably never will but many of my friends do own one – or several – so i´ve shot,handled and even tinkered with many of the models and none of them wakes the “need to own one”-desire in me. I think they look dull , much like those age-old Volvo 240 series or that lady in the Reception at my work : Kinda safe feeling – inducing but damn so boring … :whistle:
That´s just stupid. Why is that ? Do some people feel dumb for buying a gun they maybe saved for for a long time and it turns out to be flawed or why´s that ? The shame is at the maker of an expensive gun and especially so if he then tries to hush-hush the problem. Creedy motherfuckers – i would be very concerned about the image of my brand and do something about it rather than acting like it´s raining.
People here are rabiatly protective for the brand they own – and for a good reason too, as just mentioned – but negating eventual problems doesn´t help no one , except the maker/seller of the Gun. I try (i use the word “try” with caution here) to stay objective when comparing different brands and models and i´ve actually learned a good deal about the brands Cricket & EdGun.
I own no FX and probably never will but many of my friends do own one – or several – so i´ve shot,handled and even tinkered with many of the models and none of them wakes the “need to own one”-desire in me. I think they look dull , much like those age-old Volvo 240 series or that lady in the Reception at my work : Kinda safe feeling – inducing but damn so boring … :whistle:
i wish every manufacturer felt like this… :dito:
as we’ve seen some owners dont like to admit theres a problem with their product
For the price of a Bobcat, adding a regulator should not even be an option. It should come with a reg factory installed.
Poor Fred is dealing with the devil. Hard to be sure what communication passed.
Not good. I wonder whether they told FX. I´m sure Fredrik would´ve done something if he knew. His rifles may be overly hyped in US but he´s an honest guy and cares for the reputation of his Brand.
The only problem is that this dragged on for months before AOA acknowledged it. 😡
ESPECIALLY when it´s ugly … :fishinghole:
Couldn’t agree more. Fess up and fix.
Even if a gun’s ugly, it needs to work properly.
There is no Airgun brand without any issues so that was due time. The important part is that the manufacturer acknowledges the problem , admits it and rushes out parts to remedy the problem. Fixing already sold ,faulty guns should be priority one and more important than selling more new ones. Same goes with anything we buy ; Cars, Washing Machines, Computers – whatever.
I guess you’re right. He makes it sound like the ones from the factory were the leakers? I modded it a bit. They are still having problems.
Maybe I missed something
Secoda I think that what Steve was saying is that AOA installed his regulator (prolly cause it didn’t come with one) and he didn’t have any issues.
Maybe I missed something
Viewing 14 replies - 1 through 14 (of 14 total)
- You must be logged in to reply to this topic.
I read the post. Some seem to have a bit of a problem with reading comprehention. It was AOA installing the reg.s that was the problem. Factory Reg’s has no such problem.
KnifeMaker