Q:

(YouTube) 100-meters .22 cal. Daystate Air Wolf Review

Hello all,

Here is my review of the .22 cal., 40FPE, Daystate Air Wolf. I stretch the legs on the Air Wolf out to 100-meters.

See link:

Regards,

☺

Other Guns

All Replies

Viewing 9 replies - 1 through 9 (of 9 total)

quote bogman:

Hi Ryan,

Thanks for the thorough answers. I never had luck with the JSB monsters either. But my AA s510 loves the JSB 15.9 grains, super tight groups. Don’t know what the effective range is on those. The ‘cudas doubtless carry a punch for longer.

I’m up to 35 squirrels in about 40 days, but have been too busy to keep at them.

Cheers

Hi Mr. bogman,

You are welcome. My Air Arms TX200 (.22 cal.) loves the JSB 15.9 grain pellets, come to think of it, I have not fired the 15.9 through my Air Wolf. Heck, I just might. As far as your effective range is concerned, I think it would work on a crow out to 100-yards as long as your wind was properly doped for.

Nice work on the squirrels, the world is now a safer place. Ha ha, I tell my wife that squirrels are man’s natural enemy and then she says “I thought crows were man’s natural enemy?”

Regards,

Ryan

Hi Ryan,

Thanks for the thorough answers. I never had luck with the JSB monsters either. But my AA s510 loves the JSB 15.9 grains, super tight groups. Don’t know what the effective range is on those. The ‘cudas doubtless carry a punch for longer.

I’m up to 35 squirrels in about 40 days, but have been too busy to keep at them.

Cheers

quote bogman:

Spiker,

Thanks for the vid and review! I’ve got some questions, if you don’t mind:

What’s the farthest distance where a dime-sized group can be expected (with practice) ?

What was your starting fill pressure?

What other pellets have you tried in that gun, results?

What’s your cleaning and lube procedure for the pellets?

I’ve not been cleaning or lubing pellets, other than blowing off dust, but the guns I’m using are not cranking 40 fpe and squeezing the pellet skirts as tightly against the barrel.

Sorry for all the questions. I’ve been eyeing an Air Wolf for some time. I could use an accurate, heavier ‘cuda-shooter that can deliver accuracy.

Thanks!

Hello there,

Here are my answers:

-the farthest dime sized group, barring any wind, would be ~60-meters
-Starting pressure is 230 bar (anything over this chokes the valve and decreases the velocity)
-I have only ever tried JSB Monsters; which failed miserably, i.e., 36″ group at 100-meters (not a typo, very bad grouping)β€”I favour heavy pellets, period.
-Here is my cleaning and lubricating procedure (see link): http://youtu.be/1u90P9pigXw

I am happy to answer all your questions, this airgunning thing is practically a brotherhood. Feel free to message me anytime. P.S. The H&N and Baracuda is the best pellet going and if you can find a rifle that shoots them well then you will be very effective at pest removal.

Kind regards,

Ryan

Spiker,

Thanks for the vid and review! I’ve got some questions, if you don’t mind:

What’s the farthest distance where a dime-sized group can be expected (with practice) ?

What was your starting fill pressure?

What other pellets have you tried in that gun, results?

What’s your cleaning and lube procedure for the pellets?

I’ve not been cleaning or lubing pellets, other than blowing off dust, but the guns I’m using are not cranking 40 fpe and squeezing the pellet skirts as tightly against the barrel.

Sorry for all the questions. I’ve been eyeing an Air Wolf for some time. I could use an accurate, heavier ‘cuda-shooter that can deliver accuracy.

Thanks!

quote roachcreek:

I really like that Sinclair Bipod, Brownells has them on sale.

I even had to go out and measure my bench to see if it would fit.

Regards,

Roachcreek

I can see why you would have to measure the width of your bench, these flipping things are wide but stable!

πŸ™‚

I really like that Sinclair Bipod, Brownells has them on sale.

I even had to go out and measure my bench to see if it would fit.

Regards,

Roachcreek

quote MrSpiker357:

quote pablouk:

Are you the guy who had the ‘boobs’ for an assistant?
If so, MOAR BOOBS PLEASE πŸ˜›
Oh yeah, good review πŸ™‚

Ha ha, yes, I am the guy with a large breasted assistant. My assistant is quite willing to help me so I should think up another video to do.

πŸ™‚

Yay for boobs and guns!!
How about we get to see the rest of the assistant next time?!

Oh God, I’m starting to sound like a pervert… 😳

quote pablouk:

Are you the guy who had the ‘boobs’ for an assistant?
If so, MOAR BOOBS PLEASE πŸ˜›
Oh yeah, good review πŸ™‚

Ha ha, yes, I am the guy with a large breasted assistant. My assistant is quite willing to help me so I should think up another video to do.

πŸ™‚

Are you the guy who had the ‘boobs’ for an assistant?
If so, MOAR BOOBS PLEASE πŸ˜›
Oh yeah, good review πŸ™‚

Viewing 9 replies - 1 through 9 (of 9 total)

  • You must be logged in to reply to this topic.