Talonairgun | a-l-f | Activity https://talonairgunforum.com/members/a-l-f/activity/ Activity feed for a-l-f. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 8e782e6cabc1862530ea8d05d833cb7b a-l-f replied to the topic ? different B.C.s of the Beeman Kodiak pellet in the forum General Chat https://talonairgun.com/forums/topic/different-b-c-s-of-the-beeman-kodiak-pellet/#post-58317 Thu, 25 Dec 2008 23:32:37 -0400 5.5,

If I remember correctly, ChairGun gives two ways to calculate BC’s. IMO, the “best” way is to use two chronographs, one at the muzzle and one down range at a measured distance. The two velocities are fed into the BC calculator along with atmospherics (temp., pressure, humidity and altitude). A BC for those conditions, that pellet and rifle…Read more

]]> d161301f0250d1d635fa50e87ac5a549 a-l-f replied to the topic OK..I have a dumb question.. in the forum General Chat https://talonairgun.com/forums/topic/ok-i-have-a-dumb-question/#post-58112 Tue, 23 Dec 2008 12:46:37 -0400 Air has a weight of appx. 0.07 pound per cubic foot. You do the rest of the math.

Abe

]]> a245dec07d1da3ff8055083c3e0f5391 a-l-f replied to the topic Chrony? in the forum General Chat https://talonairgun.com/forums/topic/chrony-d50/#post-56906 Tue, 09 Dec 2008 13:17:48 -0400 Take a look at one of these.Small, light, accurate and Infra Red so the don’t need any external light source. They attach to the barrel (yes, they will fit in a Talon/Condor frame or shroud) so it is impossible to shoot your chrony!!!
http://www.chronoscopes.com/
I’ve used one on several rifles including a modded SS and compared the results…Read more

]]> 34f5c7ac7f13cfa8918f963141ab42cc a-l-f replied to the topic city coon in the forum TAF Gallery https://talonairgun.com/forums/topic/city-coon/#post-56472 Thu, 04 Dec 2008 23:37:43 -0400 LMTSS,

Not bad as pets IF you can ‘coon proof your house. They are smart, curious, michevious and VERY strong. Given the slightest chance, they will get into anything and everything. Usually with destructive results. Short of padlocking every door and drawer in the house, you can NOT keep them out.

The big problem with ‘coons comes after about…Read more

]]> cf9f5fabd38935f0429cad239deed18b a-l-f replied to the topic Advice on getting a shotgun? in the forum Other Guns https://talonairgun.com/forums/topic/advice-on-getting-a-shotgun/#post-55993 Sun, 30 Nov 2008 23:25:54 -0400 Patrick,

Will this shotgun double as a home defense gun? If yes, 12 gauge is preferred. If no, find one that “looks” right and seems to fit you. Look at what the other shooters at the skeet range are using, ask if you can try theirs. Some clubs have club shot guns that they will let you use to help you decide what to get.

Skeet is a relatively…Read more

]]> 8a696066e6683ff31bfc7d53a0e3cf9e a-l-f replied to the topic Sound comparisons in the forum General Chat https://talonairgun.com/forums/topic/sound-comparisons/#post-54282 Wed, 12 Nov 2008 12:40:45 -0400 Riff,
Now THAT’S impressive.

Abe

]]> ac4061fca7b7cba22046b28dbfc7126d a-l-f replied to the topic Shooting benches... any advice? in the forum General Chat https://talonairgun.com/forums/topic/shooting-benches-any-advice/#post-52599 Sun, 26 Oct 2008 11:27:52 -0400 Buzzcat,

DIY and make your own. This one folds flat, iis stable and a cut-off bar stool holds my 220 lbs very easily. Link to pic of the bench:

http://i304.photobucket.com/albums/nn174/dalgard/BoogerBench.jpg

And link to the plans:

http://i304.photobucket.com/albums/nn174/dalgard/boogerspecs.jpg

Built mine from 3/4″ ply with a battery…Read more

]]> 731eddfeb38b663b0daac32dc29fde6a a-l-f replied to the topic chrono advise please in the forum Talon/Talon SS https://talonairgun.com/forums/topic/chrono-advise-please/#post-52322 Thu, 23 Oct 2008 22:34:37 -0400 Take a look at one of these: http://www.chronoscopes.com/. Infra red so they need no outside light source. Small and as accurate as we need. Made with air guns in mind. Gives averages in feet/sec and ft lbs. I have one and a Shooting Chrony. Never more than 1-2 fps difference between them with half a dozen widely different rifles up to and…Read more

]]> 1c7b7133d6c2e97c292fe13c8516304c a-l-f replied to the topic Condor tank anomaly, wanto know if there's safety concern? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-tank-anomaly-wanto-know-if-there-s-safety-concern/#post-51580 Thu, 16 Oct 2008 11:45:47 -0400 Gri Gri,

First of all, GOOD photography. The “taper” and “Glue” appear, I say again, appear, to be the O-ring that is between the valve and the bottle neck. Yes, AF did put some kind of thread sealer on the valve threads.

Why the valve is canted, I don’t know. And I may be wrong about the other matters but mine looks the same other than the…Read more

]]> 39864f1944d65793b4c468dfee77eacf a-l-f replied to the topic Helpful tips in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/helpful-tips/#post-51112 Sat, 11 Oct 2008 11:30:42 -0400 Yeah, deffinitely. Don’t, I say again, DON’T loose the little spring that positions the safety release bar against the safety. It is small, under tension and prone to launching across the room. Also, mark, take pictures of or copy the pictures of, the three sear spring positions so you put them back in the correct positions.

When reassembling,…Read more

]]> 237bc78e7f404ec2689de8f80ee451e9 a-l-f replied to the topic How do you remove the safety? in the forum General Chat https://talonairgun.com/forums/topic/how-do-you-remove-the-safety/#post-49924 Sat, 27 Sep 2008 14:32:44 -0400 NOT RECOMMENDED! That being said, I’ve taken mine out. Surprisingly, it improved the trigger pull substatially.

You will need: a set of long allen wrenches, a 1/8 in punch.

First, remove the air bottle.

Remove the grip using a long allen wrench.

Remove the trigger shoe.

Remove the fore arm to access the front trigger plate screw.

The plate…Read more

]]> ceb72a3dec44c93ef91d9cf2c9893550 a-l-f replied to the topic AR 15 Grip Adapter for Talon/ Condor. in the forum Mods/Machinists https://talonairgun.com/forums/topic/ar-15-grip-adapter-for-talon-condor/#post-49717 Thu, 25 Sep 2008 23:22:21 -0400 WOK or anyone,

Are any larger grips available for the AR-15? I have big hands and the stock grip, even with a Tac-Star slip-on, is small for me. With the adapter, is there anything larger that will fit?

Abe

]]> b4cee5ea5df512a29f1946bdc6fd5ace a-l-f replied to the topic Changing the barrel to 25cal in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/changing-the-barrel-to-25cal/#post-49113 Thu, 18 Sep 2008 19:31:00 -0400 YES IT IS.

Abe

]]> 275e4a1b2e4144a602d92967fa86b36f a-l-f replied to the topic AirHog 88cf Tank Capacity Question in the forum General Chat https://talonairgun.com/forums/topic/airhog-88cf-tank-capacity-question/#post-48036 Sat, 06 Sep 2008 21:30:42 -0400 Glenn,

Here’s the math, etc. (you know me). I may be in error, but I’m confident with what I did. First of all, like the guy said, “No way!”

146.2 cc, from the lable, equates to 0.01 cubic feet (ft^3, the best I can do quickly on this keyboard). This is the tank capacity at 1 atmosphere.

4500 psi, the fill pressure, = 306 atmospheres appx.

To…Read more

]]> 55fcfac52b06582974d761018bae0753 a-l-f replied to the topic Newbie in the forum General Chat https://talonairgun.com/forums/topic/newbie/#post-48009 Sat, 06 Sep 2008 14:11:10 -0400 Strieyder,

Had the same problem as a newbie not too long ago. Check your profile and make sure of the following:

Under “allow BBCode” click YES

Under “always allow HTML” click NO

Try to load your avatar again. This worked for me and I am grateful to whoever told me about it.

Other than that, welcome and enjoy.

Abe

]]> b8bdd449ebbb7c4ac6f1ea0d1269c2dd a-l-f replied to the topic My TalonTunes .22 Condor Chrony Numbers in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/my-talontunes-22-condor-chrony-numbers/#post-47744 Tue, 02 Sep 2008 21:02:25 -0400 Yeah, Southern flying squirrels are not all that common. They are strictly nocturnal and quite small. Too bad you gave it to the shelter. But no… my cats would have thought it was lunch. Remind me to tell you about the one one of my college friends had as a pet. It had a liking for sweet wine…

Abe

]]> 3b3f89aec25b886e4de3db9d4387d187 a-l-f replied to the topic My TalonTunes .22 Condor Chrony Numbers in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/my-talontunes-22-condor-chrony-numbers/#post-47727 Tue, 02 Sep 2008 17:03:02 -0400 Glenn, looks pretty good. What IS your TH setting? And your PW? The string starting at 1650 looks like the best so far. Lowest SD. That’s great if you only want to shoot 10 shots before you refill. Somewhere in there there must be a compromise that will give you more shots at about the same FPS and still have a low SD.

I chronied my SS yesterday…Read more

]]> 45595aa064e1dd4f0f4551da7f7d5bc3 a-l-f replied to the topic Thanks to airtight_python in the forum Other Guns https://talonairgun.com/forums/topic/thanks-to-airtight-python/#post-47511 Sun, 31 Aug 2008 11:30:40 -0400 WAY cool!! Could we get some details, please? What is the stock material? Machined or cast? Etc, etc, etc….

Abe

]]> caa74d6f0da920562055a1c435389479 a-l-f replied to the topic how much would a pellet drop? in the forum General Chat https://talonairgun.com/forums/topic/how-much-would-a-pellet-drop/#post-47510 Sun, 31 Aug 2008 11:13:50 -0400 900 fps, 45 yard zero, appx. 2″ scope height, ChairGun gives a drop at 100 yards of right at 14.25″ with Kodiak 21.1 grain .22’s.

Abe

]]> 190f23119d1e214e30fc74c40f7833d8 a-l-f replied to the topic My noisy shop in the forum Mods/Machinists https://talonairgun.com/forums/topic/my-noisy-shop/#post-47423 Sat, 30 Aug 2008 19:19:11 -0400 A man of MANY talents and a true artist. Those rods are BEAUTIFUL!! And the WOK butts aren’t bad either.

Abe

]]> 3638b8d2502b7f9c04f6f278348e3508 a-l-f replied to the topic Baffle help please in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/baffle-help-please/#post-47267 Thu, 28 Aug 2008 22:42:10 -0400 I favor the spring/washer/o-ring set up because you can apply enough pressure to the springs when you insert the end cap to insure that nothing can get out of line and nothing is loose. With ANY method, make absolutely sure that the washers are aligned with the bore. This is VITAL!!

Abe

]]> 0a58331518804efdd2af5c3f1bebb7eb a-l-f replied to the topic 4500 psi CF tank in the forum General Chat https://talonairgun.com/forums/topic/4500-psi-cf-tank/#post-46879 Tue, 26 Aug 2008 11:42:38 -0400 Doing a little math and referring to the AirHog refill calculator, the Wal*Mart tank will give you 3 refills from 1500 psi to 3000 psi. Good for toting in the field but not sure of the adapters and the regulator on the tank.

Abe

]]> 7e88c0b474bb590e549a672160aa92b2 a-l-f replied to the topic HOW OLD ARE WE??? in the forum General Chat https://talonairgun.com/forums/topic/how-old-are-we/page/3/#post-46778 Mon, 25 Aug 2008 10:54:11 -0400 Well, I quess that so far I’m the old fart here. 61 in a couple of weeks. Haven’t been shooting air guns that long. Got interested in Minisniping when I read Peter Capstick’s article in Guns and Ammo magazine back in 1984 (still have the mag.) but never had the place to shoot until recently. 😆

Started shooting powder burners when I was 7.…Read more

]]> cc1e50b228169c312c97b48682011968 a-l-f replied to the topic neoprene washers in the forum Mods/Machinists https://talonairgun.com/forums/topic/neoprene-washers/#post-46552 Sat, 23 Aug 2008 22:47:56 -0400 From what I have seen here and my oun experience, the washers in a shroud/TSS frame need to be able to stand up to repeated blasts of high pressure, high velocity air. Would relatively soft neoprene washers be able to do that? IMO they would be distorted after a few shots and cause pellet clipping which may or may not be dangerous. Use metal…Read more

]]> af63f0f99016b7e18db2d07962c04865 a-l-f replied to the topic Condor acting up (not) in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-acting-up-not/page/2/#post-46492 Fri, 22 Aug 2008 22:40:42 -0400 Just a thought about low vel first few shots. IMO it seems as if the valve is not opening consistantly at higher fill pressures. Couls this be a result of different pre-loads/spring strengths on the valve return spring? Is there any way to measure this spring pressure on a couple of valves, try to equalize them and see what effect this would have…Read more

]]> 6ce62071d0b518b40f8f9cd4dbed3189 a-l-f replied to the topic Top Hat or Power Wheel as a constant in the forum Talon/Talon SS https://talonairgun.com/forums/topic/top-hat-or-power-wheel-as-a-constant/#post-46456 Fri, 22 Aug 2008 15:07:56 -0400 General conscensus seems to be to set the PW somewhere in the middle and, using your chrony, LOL-see other post, set your TH for best/desired performance. Just make sure that the PW setting will open the valve reliably at your usual fill pressure.

Abe

]]> dd6a868c58f37247bff24f5f7f5038a5 a-l-f replied to the topic Chrony Time in the forum General Chat https://talonairgun.com/forums/topic/chrony-time/#post-46455 Fri, 22 Aug 2008 15:02:57 -0400 Which crony?

A couple of feet from the muzzle is usually enough if you are after muzzle velocity. If you get error readings, move it away another foot. It is probably reading muzzle blast and the poor thing is confused.

Abe

]]> 3435aa78b04a9773f4d397eb95f16ccd a-l-f replied to the topic New bipod, and flip open caps for bushnell legend scope in the forum Talon/Talon SS https://talonairgun.com/forums/topic/new-bipod-and-flip-open-caps-for-bushnell-legend-scope/#post-46370 Thu, 21 Aug 2008 20:33:15 -0400 Bikin,

What length/model bipod is that?

Abe

]]> d64fb645b1296ab9c57f2eecd4e57092 a-l-f replied to the topic Choices choices in the forum General Chat https://talonairgun.com/forums/topic/choices-choices/#post-46369 Thu, 21 Aug 2008 20:27:25 -0400 Purely for asthetic reasons, I think thje home made shroud looks better.

My .02

Abe

]]> e7b55c4f9bea4d901bf761d9c6364f24 a-l-f replied to the topic ok, so i just got this useless pile of plastic and metal, in the forum Talon/Talon SS https://talonairgun.com/forums/topic/ok-so-i-just-got-this-useless-pile-of-plastic-and-metal/page/2/#post-46357 Thu, 21 Aug 2008 15:34:55 -0400 Up the Hill,

Try PA under Accessories-Air Force- part number AFU1009. This is the adapter that goes between a 1/4″ thread and the tank and it listed in stock. Is this what you are looking for or am I missing something.

Abe

]]> 40cd2a740abc755f65b600a1f429dc3b a-l-f replied to the topic Top Hat Questions in the forum Mods/Machinists https://talonairgun.com/forums/topic/top-hat-questions/#post-46044 Sun, 17 Aug 2008 20:28:33 -0400 It sounds like you have a high spot on the valve stem caused by the set screws. This may be why you can’t screw the top hat down to less than .065. Try loosening the set screws further and maybe a slight assist from the allen key in one screw. The TH should adjust lower than .065.

It might be worth removing the TH completely (just unscrew it) and…Read more

]]> 0f3a7ada4233fe80438c94ef0b2e9549 a-l-f replied to the topic What will I be needing, as in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/what-will-i-be-needing-as/page/2/#post-45769 Fri, 15 Aug 2008 00:30:25 -0400 Model #1081265. Sort of visible in the picture.

Abe

]]> 3e7346bbd28917f1db61f3a337bedd29 a-l-f replied to the topic What will I be needing, as in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/what-will-i-be-needing-as/page/2/#post-45761 Thu, 14 Aug 2008 23:43:49 -0400 DW,
Have you tried here?

http://www.lymanproducts.com/tacstar/index.htm

I got mine there a couple of weeks ago. In stock. No problem.

Abe

]]> e746d29752530dc883a582f0a21dd724 a-l-f replied to the topic shroud in the forum General Chat https://talonairgun.com/forums/topic/shroud-d97/#post-45579 Tue, 12 Aug 2008 23:07:56 -0400 When I asked Tony about a shroud for an SS with 18″ barrel, he quoted me 3 weeks. This was a couple of weeks ago. I think 3-4 weeks is a fairly reliable time frame. Hang in there. It will be well worth the wait.

Abe

]]> e9e028932f3768e36b36c2f06a1c0e8f a-l-f replied to the topic Who received my Email? in the forum General Chat https://talonairgun.com/forums/topic/who-received-my-email/#post-44717 Sun, 03 Aug 2008 11:12:21 -0400 Tron,

No joy.

Abe

]]> 355ae2bb80164daae90c4e80a6c80718 a-l-f replied to the topic adding an avatar in the forum General Chat https://talonairgun.com/forums/topic/adding-an-avatar/page/2/#post-44176 Mon, 28 Jul 2008 18:49:08 -0400 Sotxguy,

One more try. Checked BBC and HTML and they were backwards to what you recommended. Changed them. Now we’ll see what happens.

Ane lo and behold, IT WORKS. Thank you, Sir!!

These were shat at 35 yards off a bench with a (say it softly) Walther LG300 Dominator. Best I’ve done is 25/25.

Abe

P.S. Pardon the cat hair, It gets everywhere!

]]> ff7e86c66f6e0f071e8e23abd4be651a a-l-f replied to the topic adding an avatar in the forum General Chat https://talonairgun.com/forums/topic/adding-an-avatar/page/2/#post-44164 Mon, 28 Jul 2008 10:42:11 -0400 [IMG]http://i304.photobucket.com/albums/nn174/dalgard/9mmBrass35Yards-1.jpg[/IMG]

Sotxguy,

The above is what happens when I do exactly as you describe: left click IMG link on PB; come here and right click; left click paste. Unless he picture doesn’t show until the post is IN the forum, I’m at a loss. Anyone have any other ideas?

Abe

]]> 2c7eb582939a9d7554a9ad8769c7f8ed a-l-f replied to the topic adding an avatar in the forum General Chat https://talonairgun.com/forums/topic/adding-an-avatar/#post-44138 Mon, 28 Jul 2008 01:42:29 -0400 Delete the above and sorry about the HUGE pictures. Clicked the wrong one in PB.

Praise be and many thanks to Sotxguy!!! Obviously, what he said works. Someone might want to add this little fact to the avatar control page?

Now, let’s see if I can get a picture to show, Nope, just the link/URL from PB. Any suggestions about this. Where/how can…Read more

]]> a541ecdaa6b26ca3fb4d3c94aaf5e76f a-l-f replied to the topic adding an avatar in the forum General Chat https://talonairgun.com/forums/topic/adding-an-avatar/#post-44137 Mon, 28 Jul 2008 01:29:34 -0400 Triggerman,

Hate to say it but no joy. Changed both IMG’s to lower case and nothing happened. I GIVE UP!! Can’t get a picture posted, much less make an avatar. 😥 😥

Oh.well. Maybe try again later.

Abe

]]> 339723ffc6962fe418b6898cac662c4c a-l-f replied to the topic adding an avatar in the forum General Chat https://talonairgun.com/forums/topic/adding-an-avatar/#post-44132 Mon, 28 Jul 2008 00:49:12 -0400 No matter what I do, what link I click on photobucket, I always get the message that states URL is invalid. Will someone please help? Starting with a picture in Photobucket, how do I get it to be an avatar?

When I try to post a picture, the URL to Photobucket shows, but NO picture.

HELP!!!

Very confused.

Abe

]]> 7032fb327f59daa64495ffd5bfc7a156 a-l-f replied to the topic adding an avatar in the forum General Chat https://talonairgun.com/forums/topic/adding-an-avatar/#post-44120 Sun, 27 Jul 2008 21:49:13 -0400 Thanks Airtight.

Now, why won’t they show up on MY post? Clicked “IMG Code”. Got the yellow “copied” box. Came here. Placed the cursor. Right clicked the clicked “paste”. All I got is the above. I must be missing SOMETHING, but what?

Abe

]]> 46a44646ddb91262c22d5da84b06ab5f a-l-f replied to the topic adding an avatar in the forum General Chat https://talonairgun.com/forums/topic/adding-an-avatar/#post-44115 Sun, 27 Jul 2008 21:26:30 -0400 OK. I’ll try to post a picture here and see what happens.

[IMG]http://i304.photobucket.com/albums/nn174/dalgard/TheEyes.jpg[/IMG]

[IMG]http://i304.photobucket.com/albums/nn174/dalgard/9mmBrass35Yards-1.jpg[/IMG]

Tried two different pics. Pics don’t post, just URLs. as I said, what am I doing wrong??

Abe

]]> 8a229c3bfb662b3aec00d0dda164f120 a-l-f replied to the topic Talon SS power variation in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-power-variation/#post-44026 Sat, 26 Jul 2008 16:19:03 -0400 What about the high-tech polymer spring anti-twang device? It could be causing the soft hammer hits/ low power shots.

Abe

]]> 767b590b9c0f8b74b24813ad3e341064 a-l-f replied to the topic new valve idea in the forum Mods/Machinists https://talonairgun.com/forums/topic/new-valve-idea/#post-43875 Thu, 24 Jul 2008 20:51:23 -0400 Cygnus,

Interesting comcept but… What CLOSES the valve? Atmospheric pressure will not be enough. Or am I missing something? Or did you leave something out assuming we’d know about it?

Abe

]]> d5a9ad8c5abfbc9b1cb4762af0e261d3 a-l-f replied to the topic How do you remove barrel to drill bushing? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/how-do-you-remove-barrel-to-drill-bushing/#post-43771 Wed, 23 Jul 2008 22:45:02 -0400 First of all, if yours is a new purchase, view the CD that comes with the rifle. Barrel removal is very well covered.

If this is not a new purchase or, for some reason, the CD is not viewable, follow these steps. First, turn the power wheel to zero (0). Then use a 1/8 allen wrench to remove the fore end. Use a 3/32 allen wrench to remove the set…Read more

]]> 5e2fc08354d6f22b85f775b0e339ae56 a-l-f replied to the topic .22 JSB Exact in the forum General Chat https://talonairgun.com/forums/topic/22-jsb-exact/#post-43301 Fri, 18 Jul 2008 22:52:40 -0400 Got two tins in yesterday and have been inspecting and weighing them as time and energy permit. No problems with deformation and weights are within reason; much better consistancy than CP’s. Most weights grouping within a couple of 10ths. Haven’t had a chance to shoot them yet.

Abe

]]> 03676ca4cd4b964fcd506f8e3d2b77de a-l-f replied to the topic To vent or not? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/to-vent-or-not/#post-43079 Tue, 15 Jul 2008 13:01:21 -0400 The barrel bushings, at least in a Talon SS, are secured with a set screw that mates with a dimple in the barrel. Just use an Allen wrench to remove the set screw and the bushing slide off (albeit with a slight amount of persuasion. It’s a close fit).

Abe

]]> 797ba816181483ab42b4720c388f6f1f a-l-f replied to the topic Field Target Harness: A necessity or a crutch? in the forum General Chat https://talonairgun.com/forums/topic/field-target-harness-a-necessity-or-a-crutch/#post-42972 Mon, 14 Jul 2008 11:48:05 -0400 Take a look at “hunter field target”. Limited to 12X scope power, a 15″ high seat (bucket of camp stool height) and “buffalo sticks” for support. The targets and ranges are the same and some targets are designated as off hand only. Seems like a better simulation of hunting and easier for us older guys to get in position.

Abe

]]> 9df6fcdf67fc235e966d41f7a0063f9a a-l-f replied to the topic Questions about pressure. in the forum Mods/Machinists https://talonairgun.com/forums/topic/questions-about-pressure/#post-42522 Mon, 07 Jul 2008 23:08:16 -0400 Yeah. SCUBA regulators do this very well. The only problem you would have is that SCUBA regulators deliver about 200 psi through the first stage instead of 2000. I’m sure a little redisigning would give you what you want. Take a look at a cut away drawing and see what you think.

Abe

]]> 3d46aa6e5f4f5ffb903c752d8f873663 a-l-f replied to the topic What do you call your gun? in the forum General Chat https://talonairgun.com/forums/topic/what-do-you-call-your-gun/#post-42251 Fri, 04 Jul 2008 23:10:55 -0400 Lama,

Try these.

Walther LG300 Dominator…”Betty”

Walther LGR SSP with a blonde stock…”Marylin”

FWB 300…”Dora”

Talon SS… the “EBAR”

May you never get the flinchies.

Abe

]]>