Talonairgun | adham | Activity https://talonairgunforum.com/members/adham/activity/ Activity feed for adham. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 e66ad38672f51690519c7a4786cfe83e adham replied to the topic Fx impact in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-impact-d73/#post-276775 Sun, 23 Dec 2018 00:54:59 -0400 Thanks Kris… power required is around 900 fps for .177 and around 880 for .22 .

Best regards and happy holidays

]]> 0c106504e9b2a4cd61969f246ef107b0 adham replied to the topic Small puff of air on my cheek in the forum Airgun Technology https://talonairgun.com/forums/topic/small-puff-of-air-on-my-cheek/#post-247338 Mon, 29 Feb 2016 22:56:52 -0400 Instead of locktight just rap the screw with teflon tape. I did that and it worked

]]> ce611bddd04574899f153eb2b81ab8ff adham replied to the topic R3 .177 !! in the forum EdGun https://talonairgun.com/forums/topic/r3-177/#post-246563 Thu, 18 Feb 2016 10:25:40 -0400 Hi Amjad ;

Yes. It’s hunting pellet . But an inch at 50m using a scope cam is not so bad. It could have been tighter with more experienced shot.
What I really wonder about is that i can reach 1000fps with my reg set at 1500psi 100b . And still ger 1/2″ group at 50m shooting at 965 fps.

Best regards
Adham

]]> ed5e50ded243b4776c15605f7b1e26c7 adham replied to the topic Ban or not Ban on Mutant Attack in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ban-or-not-ban-on-mutant-attack/page/2/#post-246507 Wed, 17 Feb 2016 23:11:48 -0400 quote endothelium:Mughram, thanks for sharing.

I think we should end this thread.

Regards,
Endo

Agree.. Thanks Endo

]]> 090c36b0d874afc3ea5b1adc8da40608 adham replied to the topic Ban or not Ban on Mutant Attack in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ban-or-not-ban-on-mutant-attack/page/2/#post-246278 Mon, 15 Feb 2016 11:09:36 -0400 quote endothelium:Adham,

Thanks for sharing.

Same here in my standard mutant. It is CZ200 barrel. I can even show him the picture of my barrel and all dimensions for his comparison if he asked…

I don’t understand what he was asking or talking about. People have encouraged him to be more communicable, but he seemed to ignore it. If someone…Read more

]]> 1d16e0f96f85cbc277ea1f3df94a2cb5 adham replied to the topic Ban or not Ban on Mutant Attack in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ban-or-not-ban-on-mutant-attack/page/2/#post-246277 Mon, 15 Feb 2016 10:58:50 -0400 quote keyser soze:Adham I didn’t understand what he was asking. I will answer the question now that I understand what is being asked.

My mutant standard has a CZ200 barrel. I don’t know if they were taken off CZ 200 guns or if they were purchased as leftover stock. My mutant standard had 3 dimples on the top of the barrel which is an indication…Read more

]]> 1731488de4a0ee7a8f691a5a49b7679b adham replied to the topic Ban or not Ban on Mutant Attack in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/ban-or-not-ban-on-mutant-attack/#post-246186 Sun, 14 Feb 2016 01:38:27 -0400 Hello to all.
I did not want to comment on Sniper’s issue with the Mutant when he was around. Now, since he has been banned from TAG i would like to say my opinion. Someone in Kuwait criticized the Vulcan being of low quality just before the introduction of The mutant in Kuwait. This someone appeared to be associated with the Mutant dealer ( who…Read more

]]> 6fc2843fb473e96e3d3aa5ff00f3b550 adham replied to the topic hi Sniperqty in the forum Airgun Technology https://talonairgun.com/forums/topic/hi-sniperqty/page/2/#post-244781 Mon, 01 Feb 2016 14:09:07 -0400 Welcome back Sniperqty, looking forward to seeing your valued contributions on the Vulcan.

Thanks
Adham

]]> 6e84587190e84e35c7f982d3dd732dcf adham replied to the topic EDgun R3 .30 video review in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3-30-video-review/page/2/#post-237155 Tue, 13 Oct 2015 13:37:41 -0400 Nice review of a nice gun. How many shots you get?

]]> 757a26ea4a5ba5099f0bfeb9e5d8ab2b adham replied to the topic Hands on LElya n Veeeles 2015 in the forum EdGun https://talonairgun.com/forums/topic/hands-on-lelya-n-veeeles-2015/page/2/#post-235434 Fri, 11 Sep 2015 16:25:54 -0400 Mghram..

Now the regulator is not working at all.. Looks like an unregulated gun.

]]> 3dc16ca8f7c4f1f4d0e128b98e5b3ca0 adham replied to the topic Does anyone use the DIN fill whip included with the Vulcan? in the forum Airgun Technology https://talonairgun.com/forums/topic/does-anyone-use-the-din-fill-whip-included-with-the-vulcan/#post-233902 Fri, 14 Aug 2015 04:38:12 -0400 You are absolutely right. I am using matador’s

]]> 183cfc1792a2996da6a57042354d58ca adham replied to the topic Vulcan video in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-video/#post-226606 Thu, 14 May 2015 16:36:52 -0400 quote foxback:good find thx 4 posting it.
wish i could understand him, the 2nd vid how did he de-gas the gun from the back?
what did he use? 🙄
Edited..

I believe you have .25 cal which does not have that brass piece.

He used this..

Best regards
Adham

]]> d717d515a8aa17ce9564aeeb10755f93 adham replied to the topic 170 Shots at 13 FPE with .22 Cricket! in the forum Kalibrgun https://talonairgun.com/forums/topic/170-shots-at-13-fpe-with-22-cricket/page/2/#post-224824 Mon, 20 Apr 2015 15:34:25 -0400
Airgun gear show reviewing a sub 12ft/lb .177 cricket. Legally set up by the seller.
Any idea what method is used there, and how efficient is it?

Best regards
Adham

]]> dffbf1ae09242c165eae760f541390bc adham replied to the topic 170 Shots at 13 FPE with .22 Cricket! in the forum Kalibrgun https://talonairgun.com/forums/topic/170-shots-at-13-fpe-with-22-cricket/page/2/#post-224804 Mon, 20 Apr 2015 04:00:57 -0400 quote Awny:My compact 177 I set at 600 fps on JSB 8gr since I use it mainly for blinking, small game, and backyard type shooting (I have the 22 standard for the 30 fpe hunting and long range). With that setting I get about 200 shots per fill. Sometimes it feels it never ending shots. And with that setting its extremely quiet!!!

Yes Awny.. .177…Read more

]]> 7bb5e5484b10bb76f236e9e9daf9f817 adham replied to the topic 170 Shots at 13 FPE with .22 Cricket! in the forum Kalibrgun https://talonairgun.com/forums/topic/170-shots-at-13-fpe-with-22-cricket/page/2/#post-224689 Sat, 18 Apr 2015 14:05:18 -0400 Hi GKU.. Yes i remember Ernest was saying that. But i am not sure how would that technique help with air efficiency. meaning, with rotated barrel , less air leaving AT?
What about noise?
With my reg set at 80b and weaker HS it’s so quiet. And speed is more than enough for .177 cal.

Best regards
Adham

]]> 00ea2bedc9034bc277256c28c0dfc9da adham replied to the topic 170 Shots at 13 FPE with .22 Cricket! in the forum Kalibrgun https://talonairgun.com/forums/topic/170-shots-at-13-fpe-with-22-cricket/page/2/#post-224684 Sat, 18 Apr 2015 12:38:35 -0400 Hi SPINJ. I followed your steps and adjusted my .177 std . Not the greatest ES, but the average through out the shooting session was awesome. Including errors, i shot 220 shots from 220b to 70b using H&N 8.64gr averaging 829fps 13.19 fPE.

Here is my results.

Best regards
Adham

]]> 544433f1a0d0417362c86320bf3ce8d7 adham replied to the topic .25 shot string !!!!! extreme spread of 140 fps???? help.... in the forum Kalibrgun https://talonairgun.com/forums/topic/25-shot-string-extreme-spread-of-140-fps-help/#post-224234 Sun, 12 Apr 2015 00:35:35 -0400 Try using this method

Also provided by Ernest

]]> cccbef4d766aaca28d4e23c9bb59ba7c adham replied to the topic I cant get to zero in the forum EdGun https://talonairgun.com/forums/topic/i-cant-get-to-zero/#post-224155 Sat, 11 Apr 2015 07:54:35 -0400 All R3’s and R3ms scope rails are not leveled , inorder to reach longer range, the front is lower than the rear. If you dont prefer shimming the front front mount, i suggest you bring both mounts closer to the rear end of the rail.

Best regards
Adham

]]> 779e12f5f283adfe66c95fc88356da1d adham replied to the topic Slow leak? in the forum Kalibrgun https://talonairgun.com/forums/topic/slow-leak/#post-223479 Fri, 03 Apr 2015 17:02:00 -0400 The o ring dried out and took a shape of plastic part of gauge .

]]> b3fa03b0cc8d4fca48f967530e265422 adham replied to the topic My Cricket Bullpup Wood Stock Hack in the forum Kalibrgun https://talonairgun.com/forums/topic/my-cricket-bullpup-wood-stock-hack/page/4/#post-223410 Thu, 02 Apr 2015 23:10:04 -0400 Really beautiful…. Great mod GKU

]]> ec62b4e306e768f33e4c61d6562fd8e5 adham replied to the topic Vulcan .25 review in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-review/#post-223172 Tue, 31 Mar 2015 15:37:33 -0400 Welcome to the VULCAN world.

Awny.. The first production came with 3 calibers .177 .22 and .25

Best regards
Adham

]]> 1712dcb2640a35d59fc63ebe6496ee2b adham replied to the topic Ideal reg. pressure for .177 in the forum EdGun https://talonairgun.com/forums/topic/ideal-reg-pressure-for-177/#post-223133 Mon, 30 Mar 2015 23:30:38 -0400 Ok.. Back on the subject. I’ve received a reg tester from John and adjusted the reg down to 100bar. Still it was shooting JSB 10gr too hot at 980fps with HST 1 turn ccw from max speed. I then terned furthet to 915fps. I know it’s not the reccommended method, but i needed to quiet to hammer strike as well. Started recording speed and shot count…Read more

]]> e2043fac681adefb4d9c4ddd882cd727 adham replied to the topic Lelya Shipment Update? in the forum EdGun https://talonairgun.com/forums/topic/lelya-shipment-update/page/9/#post-222911 Fri, 27 Mar 2015 21:24:38 -0400 I believe it’s about time for ED to advise latest about production progress and expected delivery date.

Thanks and best regards
Adham

]]> 2a3e48e3df057e38434796a374082371 adham replied to the topic new R3M owner, and I forgot to ask 1 ? in the forum EdGun https://talonairgun.com/forums/topic/new-r3m-owner-and-i-forgot-to-ask-1/#post-222476 Sat, 21 Mar 2015 23:19:37 -0400 A degasser is a must as it acts as reg puller as well. Edgun’s o rings last long, still, you don’t know when you will need standby. I would contact Ernest. He may provide both.

Best regards
Adham

]]> 62337e687e667683414c203641bb9c31 adham replied to the topic Vulcan Pre-Order At TalonTunes... in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-pre-order-at-talontunes/#post-222474 Sat, 21 Mar 2015 22:58:00 -0400 Great shooting sniper.. And that 75 yard group at the end was a master piece .

]]> 9b154892638aa1a6de0529525175e253 adham replied to the topic Ed and Family Winter Sports in the forum EdGun https://talonairgun.com/forums/topic/ed-and-family-winter-sports/#post-222173 Wed, 18 Mar 2015 05:58:44 -0400 Hi Ed.. Enough outing, we are all “desperately seeking LELYA”

]]> f6ff0250bc5cfd74b6d4dd78d69fea4b adham replied to the topic Villes ATL Vulcan .22 in the forum Airgun Technology https://talonairgun.com/forums/topic/villes-atl-vulcan-22/page/9/#post-222092 Tue, 17 Mar 2015 07:34:05 -0400 quote foxback:what pellets were u using? 🙄

JSP 18 gr 885fps . When i shoot again , i’ll try 16 gr at about 940fps

Best regards
Adham

]]> 783b16a6138cc08784e2fb3eaaa617ba adham replied to the topic Cricket BP 25 maxed out HST in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-bp-25-maxed-out-hst/#post-222047 Mon, 16 Mar 2015 21:59:04 -0400 Stock .25 usually shoot higher. Try to back out HST to flush and start turning CW till speed stops or comes down.

For future tuning, here are oal lengh of regulators with different pressure made by Ernest.

best regards
Adham

]]> ec195073a4964f753f01daf055b29452 adham replied to the topic Villes ATL Vulcan .22 in the forum Airgun Technology https://talonairgun.com/forums/topic/villes-atl-vulcan-22/page/9/#post-222045 Mon, 16 Mar 2015 21:27:00 -0400 quote Zonk:For 75 yards doesn’t look to bad to me.

Not bad at all for me. I am sure the gun can do much better with other experience shooters. 2 things i don’t like though, the loud ping, and bolt mechanism. It’s easy to double load if you don’t pay attention while fast shooting. Unlike other guns, the bolt rotates the mag before engaging the…Read more

]]> ddfd3297cbbe63db11d1b046a380a0c3 adham replied to the topic Villes ATL Vulcan .22 in the forum Airgun Technology https://talonairgun.com/forums/topic/villes-atl-vulcan-22/page/9/#post-221912 Sun, 15 Mar 2015 16:26:43 -0400 Hi all, this is my 75 yrds target. I shot with the wind. My Vulcan .22 is relatively new , only 1k pellets through it.

And this is my edgun r3 . I know it might be my shooting that messed the score, not the gun.

I did not measure the groups, but here is the target paper , the small square is 1″ and the center one is 4″

Thanks and…Read more

]]> a507b4fa79a92720a25db2e17d02dd25 adham replied to the topic Intro..New .25 cricket onwer in the forum Kalibrgun https://talonairgun.com/forums/topic/intro-new-25-cricket-onwer/page/2/#post-221000 Thu, 05 Mar 2015 20:30:44 -0400 quote GKU:quote Adham:Welcome to cricket world scorpio.
Please allow me to use your post to clear up a problem i have with my .25 that you might face one day.

The gun was set at 910fps . I kept un used for a 3 months , then when i shot it again it was acting strange.
Now the first shot always low (880fps) the rest of the 1st mag varies between…Read more

]]> f790d356fc57662323bdbc0a723fbc44 adham replied to the topic Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-d36/#post-220382 Fri, 27 Feb 2015 18:42:30 -0400

New video on the Vulcan about trigger and breech.. It’s in arabic, but watch till the end and see what speed he was able to get out of it.

The gun appears to be very simple.

Best regards

Adham

]]> 663fedc788d71f3a9ee73560cb6fc0f7 adham replied to the topic Intro..New .25 cricket onwer in the forum Kalibrgun https://talonairgun.com/forums/topic/intro-new-25-cricket-onwer/#post-220176 Wed, 25 Feb 2015 20:28:25 -0400 quote Zonk:Both look nice Adham. Sir Ville is another Bobcat owner, he may even have 2 in his closet. 😆
Hahaha
I am willing to give him both my bobcats in .22 and .25 provided he agrees to takes a picture hugging them 🙂

]]> 1d2d32bebce86d199ff296428933f9f1 adham replied to the topic A 0.177 Vulcan has a new home in the forum Airgun Technology https://talonairgun.com/forums/topic/a-0-177-vulcan-has-a-new-home/#post-220173 Wed, 25 Feb 2015 20:20:14 -0400 Congrats kmhusain

Mine is in .22 serial #27

Will not shoot mine till Sir ville shoots his on frieday , since he was the first one to announce getting it 🙂
Best regards
Adham

]]> 8cf35e3d93ceabc70c82376f78dbf85d adham replied to the topic Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-d36/#post-220168 Wed, 25 Feb 2015 19:47:26 -0400 quote humdinger:Total waste of time. Not only is it not in English, he doesn’t do anything informative in the video. Real snoozer.
Maybe because it was 6 am when he made the video 🙂
Two good facts from this vid. 1- the bolt is interchangeable. 2- no indexing pin to rotate the mag.

Knowing this person, this gun will be his main occupation for…Read more

]]> 418f9657982ae58d33f0edcbabdcfe19 adham replied to the topic Intro..New .25 cricket onwer in the forum Kalibrgun https://talonairgun.com/forums/topic/intro-new-25-cricket-onwer/#post-220166 Wed, 25 Feb 2015 19:29:19 -0400 Thanks Guys.. I will lower on the reg and see. What is the suitable oal of the reg, since i don’t have a reg tester. Waiting for your kind advice while playing with my new toy.

My friend Caesar prefers the bobcat 🙂

Best regards
Adham

]]> 80463adc2ac746b7546fce82f94e0308 adham replied to the topic Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-d36/#post-220132 Wed, 25 Feb 2015 13:35:04 -0400 Yeah zonk unfortunately. And i am sure many videos form him will follow, because he is selling the gun in Kuwait.

Best regards
Adham

]]> dec3ec60800ab110114bcaf5c9e5731c adham replied to the topic Intro..New .25 cricket onwer in the forum Kalibrgun https://talonairgun.com/forums/topic/intro-new-25-cricket-onwer/#post-220127 Wed, 25 Feb 2015 12:26:55 -0400 Welcome to cricket world scorpio.
Please allow me to use your post to clear up a problem i have with my .25 that you might face one day.

The gun was set at 910fps . I kept un used for a 3 months , then when i shot it again it was acting strange.
Now the first shot always low (880fps) the rest of the 1st mag varies between 897-908 fps. 2nd and 3rd…Read more

]]> faeacb8d7c0009d56fc894f809f0f8ea adham replied to the topic Help please in the forum Kalibrgun https://talonairgun.com/forums/topic/help-please-d75/#post-219495 Mon, 16 Feb 2015 19:40:03 -0400 quote GKU:Good job Adham, that can be used to remove it also !

You can also use a plastic fork.
Break off the three forks and heat the forth one at an angle so you can go (fit) into the breech easier.

I have a rule that is a vEry oLd one, no metals !

~ ATB ~ GKU

Thanks GKU.. I did follow your rule and Ernest’s video.
The plastic fork would…Read more

]]> 77ea09687944e2e70689879a1ea71aaf adham replied to the topic Help please in the forum Kalibrgun https://talonairgun.com/forums/topic/help-please-d75/#post-219424 Sun, 15 Feb 2015 18:45:03 -0400 quote Sir Ville:Perfect! You can still clean between your Teeth with it so it serves double purpose 🙂
I push an VFG felt just so it barely clears the o-ring groove. That stops the o-ring going past the groove and makes the install a snap.

Great idea. You can still clean the barrel when you are done 🙂

]]> f1d160defbc6ddc14390396dc912d925 adham replied to the topic Help please in the forum Kalibrgun https://talonairgun.com/forums/topic/help-please-d75/#post-219415 Sun, 15 Feb 2015 14:18:12 -0400 Thank you all, you were very helpful.
Thank you Ernest for the video, it was very clear.

I used this to fix the o-ring

Best regards
Adham

]]> 409a6266895947d6c5a1e7518f2c859b adham replied to the topic Cricket leak in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-leak/#post-218732 Wed, 04 Feb 2015 09:47:22 -0400 Thanks Sherrod for the topic, and special thanks to Ernest . I just had the same issue with my .22 compact . Found little rust on the screw, cleaned it up, chenged the o-ring and all worked perfectly.

Glad to be in this forum.
Best regards
Adham

]]> a55a644117ae392a9514beb4da8fd35f adham replied to the topic About had it with new .25 edgun in the forum EdGun https://talonairgun.com/forums/topic/about-had-it-with-new-25-edgun/page/2/#post-218418 Sat, 31 Jan 2015 22:49:26 -0400 If not clipping, then ,Looks like you have big speed fluctuation .

]]> 3e9cba6316f21fbcbe3e7e6da460d573 adham replied to the topic Ed, about your barrel specifications in the forum EdGun https://talonairgun.com/forums/topic/ed-about-your-barrel-specifications/#post-218415 Sat, 31 Jan 2015 22:35:21 -0400 what fps do you get Darry? If it’s shooting hot and straight, then it’s good news for long distance and flatter trajectory. And , do you get enough shots out of a fill?

Best regards
Adham

]]> 81ad9e72cf2db370d87153f5bc938070 adham replied to the topic I was told to post pictures, in the forum EdGun https://talonairgun.com/forums/topic/i-was-told-to-post-pictures/#post-218188 Wed, 28 Jan 2015 21:40:05 -0400 Congrats.. Great looking gun. Hope you like it

]]> 7366d3194536cd00e6c1ff9ec179b4a4 adham replied to the topic anyone experiencing R3M magazine indexing issues? in the forum EdGun https://talonairgun.com/forums/topic/anyone-experiencing-r3m-magazine-indexing-issues/#post-218003 Mon, 26 Jan 2015 00:43:08 -0400 Wish all the best

]]> e9aadb96d01a59110d41c16dd1a6b593 adham replied to the topic anyone experiencing R3M magazine indexing issues? in the forum EdGun https://talonairgun.com/forums/topic/anyone-experiencing-r3m-magazine-indexing-issues/#post-217998 Mon, 26 Jan 2015 00:12:24 -0400 The matador is a great gun to shoot, handle , and so easy to work on. Does it have issues with pellet indexing? Definitely yes , mk1 at least. I had to replace the breech with the new modified one and it feels much better. Just make sure you don’t get mk1 and enjoy shooting.

Best regards
Adham

]]> 0d4351023818cacf9c26e98799ab698e adham replied to the topic Quick Disconnect in the forum BullPup General Chat https://talonairgun.com/forums/topic/quick-disconnect/#post-217363 Sat, 17 Jan 2015 22:40:52 -0400 Apply a very small amount of silicone grease in the male foster fill and fill the gun with air. I had the same problem with both my bobcats. Hope you succeed.

Best regards
Adham

]]> b55284ead7193b2432d543d2ab5f85c2 adham replied to the topic Can you de-cock a Cricket like you can an Edgun? in the forum Kalibrgun https://talonairgun.com/forums/topic/can-you-de-cock-a-cricket-like-you-can-an-edgun/#post-217338 Sat, 17 Jan 2015 14:28:32 -0400 The same principle.. Just put it on manual and de-cock.

]]> e7283c76207eb04b2c5502b95cf28368 adham replied to the topic Ideal reg. pressure for .177 in the forum EdGun https://talonairgun.com/forums/topic/ideal-reg-pressure-for-177/#post-216606 Mon, 05 Jan 2015 16:03:21 -0400 Greetings to All;

Last night i chronied the gun again, and i used two chronies. The Combro attached to the muzzle and the Shooting chroney Beta one foot away. From 210bars i had 90 good shots , and anothe 40 above average speed shots. The question is. Why there is a gap between the two chronies? e.g , Combro average speed for the first 90 shots…Read more

]]>