https://talonairgunforum.com/members/airgunmann/activity/ Activity feed for airgunmann. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 d75fdb2945e8a539c0e33cda0d56270e https://talonairgun.com/forums/topic/wts-talon-tunes-14-inch-shroud/#post-276236 Fri, 21 Sep 2018 23:46:02 -0400 This item is sold

]]> 55f7fb2c8da4ba90434f1767112b691c https://talonairgun.com/forums/topic/looking-to-sell-af-250-24-in-barrel/#post-276235 Fri, 21 Sep 2018 23:45:05 -0400 This item is sold

]]> 2db56e3c1268e626437d98e427dd914a https://talonairgun.com/forums/topic/question-on-installation-of-tt-parts-gt-talonss-hammer-and-trigger-spring/#post-276194 Sun, 16 Sep 2018 15:29:38 -0400 No problem

]]> e9f1f38a9bfd7816b06ce342a65f2930 https://talonairgun.com/forums/topic/question-on-installation-of-tt-parts-gt-talonss-hammer-and-trigger-spring/#post-276191 Sun, 16 Sep 2018 02:19:51 -0400 Take it out the back take off the bottle take out spin lock nut remove the cocking hand and pull the breech or sliding black part out the back and the hammer should come out put back together in reverse order . Trigger spring you have to remove the fore arm the grip and trigger gaurd then you have to remove the trigger shoe and the piece on the…Read more

]]> 23465569593c5672ab51c0265fb41ef1 https://talonairgun.com/forums/topic/looking-to-sell-af-250-24-in-barrel/#post-276169 Mon, 10 Sep 2018 17:41:42 -0400 Price reduced 125.00 shipped

]]> d1cdbba51abe6fff8965ff6c9c4e3f8b https://talonairgun.com/forums/topic/talondor-25-to-shoot-slugs/#post-276138 Wed, 05 Sep 2018 15:11:05 -0400 Yes it is unchoked .250 barrel also have a shroud I wts that fits it to they are both listed in classified adds on the forum here

]]> 366c52d1c8fb4d5726ee73a94ab68e61 https://talonairgun.com/forums/topic/looking-to-sell-af-250-24-in-barrel/#post-276128 Tue, 04 Sep 2018 15:07:03 -0400 Nsa ammo nsa swaged slugs 39 gr to 59 gr bullets never tried pellets swagged to .250

]]> 1dfa4b7e9811118336b039cdc93f1d6d https://talonairgun.com/forums/topic/af-condor-lateral-bolt/#post-276120 Mon, 03 Sep 2018 21:13:04 -0400 It should make cocking the gun easier also I would think

]]> 53354e3d75d7b48cf1490baa02460675 https://talonairgun.com/forums/topic/af-condor-lateral-bolt/#post-276118 Mon, 03 Sep 2018 20:03:04 -0400 Do mean turning the breach off to the side and cocking it from the side . I don’t think it would take alot just a new groove cut on the side and drill and tap a new hole for the breech cocking lever because there is a groove in the bottom

]]> 9546edb3b957ac16f3d63f2e1651a4e6 https://talonairgun.com/forums/topic/looking-to-sell-af-250-24-in-barrel/#post-276116 Mon, 03 Sep 2018 19:09:58 -0400 I’m not sure what kind of accuracy pellets would have I suppose it would depend on the size of the pellet

]]> 2e771b92175a2a8a9a1d032f8a609460 https://talonairgun.com/forums/topic/looking-to-sell-af-250-24-in-barrel/#post-276102 Sun, 02 Sep 2018 17:25:36 -0400 How’s a 150 shipped sound

]]> 7901eab0d411b4a99b36b995dc01c6a2 https://talonairgun.com/forums/topic/talondor-25-to-shoot-slugs/#post-276092 Sat, 01 Sep 2018 22:02:31 -0400 Accuracy is good but I haven’t tried it to far out the 59 gr bullet is going to fast with the PCP tunes valve that I have and have since went to a 257 barrel and am going to cast some 80 gr bullets I think is the size of the mold I got . The 59 gr bullets I tried in the 250 lw barrel are over the sound barrier thinking about selling the 250 barrel now

]]> c797ece416e15c3b91e921f470629f0c https://talonairgun.com/forums/topic/talondor-25-to-shoot-slugs/#post-275363 Thu, 07 Jun 2018 23:57:02 -0400 Well I tried the extreme flow valve it started leaking and valve stem popped out I wrote pcptunes about it so we’ll see what they do . Any way I tried my modded hi flow throat opened to 5/16 one piece top hat . Opened the bottom intake port to .350 and polished it tried Nielsen ammo 39 grain 2500 psi fill used a 110 gram hammer and heavy spring…Read more

]]> e4953769022499ac524cdf020b92609c https://talonairgun.com/forums/topic/talondor-25-to-shoot-slugs/#post-275345 Wed, 06 Jun 2018 03:08:44 -0400 I have a 357 recluse that I hopped up a little slings 105 gr that I cast at like 910 fps and that thing is loud but I only get 3 shots

]]> 24aca8413cfd9d97ae5349f1459153e5 https://talonairgun.com/forums/topic/talondor-25-to-shoot-slugs/#post-275343 Wed, 06 Jun 2018 02:54:11 -0400 Rl air guns had lw unchoked 24 in .250 heavy barrels but no 257 barrels any more . I’ve been talking to Doug Noble about a valve

]]> bef43a5c1b98d7dbbb42398cf27639c9 https://talonairgun.com/forums/topic/talondor-25-to-shoot-slugs/#post-275337 Tue, 05 Jun 2018 02:00:50 -0400 I got a unchoked 24 in .250 barrel on the way . Got a couple different bottles on the way carbon fiber extreme flow valve from PCP tunes and modded the high flow valve I have . Have a couple different springs and hammers on the way and a shroud

]]> b18cf0eeba006bef2bf97333255ee6e4 https://talonairgun.com/forums/topic/talondor-barrel-sizes-needed/#post-274537 Tue, 06 Mar 2018 07:46:38 -0400 I turned it down to .375 already . Thanks for the info on the breech sorry about double post wasn’t sure where I was supposed to post the question

]]> 9b783729015c755481813653da46f667 https://talonairgun.com/forums/topic/talondor-barrel-sizes-needed/#post-274499 Sun, 04 Mar 2018 04:51:25 -0400 From what I could find it looks like breech end should be .375 by 3 inches long from what I can tell . Where can I get breech to barrel loading gate any ideas

]]> 0578f73021c8b1f4a3ef32537a91c139 https://talonairgun.com/forums/topic/25-marauder-and-ss-valve/#post-274259 Sat, 10 Feb 2018 23:56:06 -0400 I got side tracked with a fire arm project .so it is on my work bench along with 2 revisions that they sent me to change out . Apparently the prototype s we’re doing better than the production pieces and they sent the parts to change out to try to get the better efficiency from what I understand

]]> 5aecf7f6015fab8dd6d56268f45156d1 https://talonairgun.com/forums/topic/25-marauder-and-ss-valve/#post-273826 Sat, 13 Jan 2018 20:55:09 -0400 Yeah alot of people are using a regulator and a light hammer with them . I thought I would try it any way

]]> 4d2c30d072145a97f519b95935680bc8 https://talonairgun.com/forums/topic/build-possibility/#post-273801 Fri, 12 Jan 2018 01:20:48 -0400 257 would be my vote and trying to decide if I should turn my 25 talon ss in to 257

]]> 4284fdf477f9846684adf199444e1674 https://talonairgun.com/forums/topic/25-marauder-and-ss-valve/#post-273800 Fri, 12 Jan 2018 00:59:05 -0400 This isn’t the same old balanced paintball valve . This valve has been put to the test with several people running the prototype . It’s also really efficient and uses poppet design of the war valve I believe

]]> 5c3a67ebda34373f6ffff6dcb004111e https://talonairgun.com/forums/topic/tuning-talondor-ss-25/#post-273732 Sat, 06 Jan 2018 21:11:52 -0400 I really don’t expect it to be to efficient . I was pretty amazed that the hi flow valve and the 12 in barrel with the stock top hat . Pushes the 33.95 faster than my mrod 25 with a modded valve larger transfer port and 17 lb spring was pushing them . Granted my mrod valve isn’t crazy modded . I got the new ss valve from Travis for that . If I get…Read more

]]> 996be0fe8a7cfaffd314d0f9d61c3537 https://talonairgun.com/forums/topic/talondor-25-ss/#post-273689 Fri, 05 Jan 2018 01:43:27 -0400 Here’s a picture having trouble resizing the pictures on my phoneAttachments:

]]> dd0794f061a8c769ad2db9ca8c41fc06 https://talonairgun.com/forums/topic/talondor-25-ss/#post-273679 Thu, 04 Jan 2018 15:49:32 -0400 Can some one tell me how to attach pics . Keeps telling me that it’s to large . I tried cropping the pic but it’s still to large

]]> ec7ed7eee1bd3e0a88530da254f247b4 https://talonairgun.com/forums/topic/talondor-25-ss/#post-273674 Thu, 04 Jan 2018 07:22:44 -0400 I will once I figure out how to attach them

]]>