Talonairgun | backyardsniper1 | Activity https://talonairgunforum.com/members/backyardsniper1/activity/ Activity feed for backyardsniper1. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 62712316f2ecd9c981e43f24d6a633df backyardsniper1 replied to the topic Felt Baffles in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/felt-baffles/#post-181761 Tue, 22 Oct 2013 13:58:28 -0400 quote yellowyak:What do you use to stop the felt from fraying after cutting. For me the felt baffles are much quieter then curlers and foam.
If you’re using it as a wrap I would say try a little glue on the cut edge. They make fabric stuff to stop fraying but I really think it’s just a Krazy type glue.

]]> 38f1d811bffe5a229ae3b09844ce83b7 backyardsniper1 replied to the topic Felt Baffles in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/felt-baffles/#post-181543 Sat, 19 Oct 2013 04:57:06 -0400 quote Eyerelief:I wonder if the pads used to protect hardwood floors from scooting chairs would work?……………. They come in various sizes and full sheets and should be pretty tough.
That might be good for a larger dia shroud or ldc.
I used less than 25 felt washers in stacks of 5 with the rubber washers spacing the stacks. It works very…Read more

]]> b668de8bb99c570afd197ad01efc22c8 backyardsniper1 replied to the topic Felt Baffles in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/felt-baffles/#post-181394 Thu, 17 Oct 2013 04:36:55 -0400 The felt washers I ordered are 3/4 od 1/4 id and 1/4 thick . I also ordered some rubber washers for spacers.

]]> 0467d50a20dcc25a554ce126e21c0aa4 backyardsniper1 replied to the topic Felt Baffles in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/felt-baffles/#post-181359 Wed, 16 Oct 2013 13:59:36 -0400 Thanks you’re right on the money. They have washers and flat stock.

]]> b3333ae511d880e5b3a2d3f65e813441 backyardsniper1 replied to the topic best ldc in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/best-ldc/#post-181314 Tue, 15 Oct 2013 04:24:21 -0400 I have a Storey on my bull pup. It’s not 1/2x 20 it goes right into the existing shroud and adds about 8″.

]]> 67f7b589cf02226e23bf6751a7905c2d backyardsniper1 replied to the topic short shroud extension in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/short-shroud-extension/#post-180066 Fri, 20 Sep 2013 04:34:49 -0400 With my SS I ran a combination of a Subsonic extension w/the fend washer,o ring,spring,and plastic tubing. It was a great combo. Prior to that I used a mono baffle setup with no protrusion and the fender washer etc. setup.

]]> 385c0d32c5b47367faabb4a084c5feb1 backyardsniper1 replied to the topic M'rod baffles in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/m-rod-baffles/#post-179944 Tue, 17 Sep 2013 14:34:26 -0400 quote swift518:quote Backyardsniper1:Is anyone making baffles for a .22 that give less report than the factory ones?

I have been looking as well and have been experimenting with some different designs. So far I have found using #14 finishing washers have had the best results. Definitely can hear the difference while shooting. Im still working on…Read more

]]> 155a37b687ec6b991a1f8f5295706a6a backyardsniper1 replied to the topic NEW Talon Look a like / my wet dream in the forum Mods/Machinists https://talonairgun.com/forums/topic/new-talon-look-a-like-my-wet-dream/#post-124905 Sun, 19 Dec 2010 17:11:13 -0400 Very nice man.

]]> e6a5cd53a69190d8e2b05a26c0c43799 backyardsniper1 replied to the topic An X Ray of various suppressor designs in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/an-x-ray-of-various-suppressor-designs/#post-120324 Mon, 11 Oct 2010 12:32:26 -0400 What’s the most effective design, given that they’re all on the same rifle?

]]> 7beda3a5560e2cbc0315ff55a99d595d backyardsniper1 replied to the topic I know my rifle is accurate, but WTF!!! in the forum Talon/Talon SS https://talonairgun.com/forums/topic/i-know-my-rifle-is-accurate-but-wtf/#post-119466 Wed, 29 Sep 2010 15:22:55 -0400 Great group.

]]> 22fd5d9727ecedcfcc09f342fb98cfa7 backyardsniper1 replied to the topic Leaky stem problem in the forum General Chat https://talonairgun.com/forums/topic/leaky-stem-problem/#post-119389 Tue, 28 Sep 2010 22:29:10 -0400 The gasket seemed to be ok. I added teflon to the threading and loc tite to the grub screws of the tophat. It is holding well so far. I’ll try another site in tomorrow.

]]> a55a9bdd47c31a1d7525c01236f78cf9 backyardsniper1 replied to the topic Leaky stem problem in the forum General Chat https://talonairgun.com/forums/topic/leaky-stem-problem/#post-119245 Sun, 26 Sep 2010 14:35:09 -0400 Thanks, I’ll check it out after it bleeds out.

]]> dec521e6443efc37913485df7d9f557b backyardsniper1 replied to the topic SUPER TALON SS - 15 in the forum Talon/Talon SS https://talonairgun.com/forums/topic/super-talon-ss-15/page/2/#post-115395 Sat, 07 Aug 2010 13:12:49 -0400 Great pics. Are those banana rats next to the rabbits?

]]> 9e645d30cfe2019c806f9090835205a5 backyardsniper1 replied to the topic SUPER TALON SS - 15 in the forum Talon/Talon SS https://talonairgun.com/forums/topic/super-talon-ss-15/page/2/#post-115391 Sat, 07 Aug 2010 12:45:24 -0400 That’s some really great work. Do you have some hunting pics or videos of it in action? I’m curious how your vented bushing work with report.

]]> 35645e79c3fbdd04f1d99314e017c82b backyardsniper1 replied to the topic Ldc adaptor in the forum Mods/Machinists https://talonairgun.com/forums/topic/ldc-adaptor/#post-114530 Tue, 27 Jul 2010 02:09:21 -0400 Thanks for the replies. I’ll have one on the way soon.

]]>