Talonairgun | bigtinboat | Activity https://talonairgunforum.com/members/bigtinboat/activity/ Activity feed for bigtinboat. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 8a2d050ae2b2f09f8874c6d0ac176f11 bigtinboat replied to the topic Foster valve o ring - where buy? in the forum General Chat https://talonairgun.com/forums/topic/foster-valve-o-ring-where-buy/#post-277055 Mon, 18 Mar 2019 01:28:33 -0400 quote anomad post_id=389779 time=1552865303 user_id=102588:Thanks for the links guys. I should pick up some spares.

I got a #60 regular o-ring from the plumbing department at Lowes and it seems to be holding. Pumping up a Condor tank by hand is always fun!

The Danco #60 (what Home Depot sells) is the same as a -006 (1/4 in. OD x 1/8 in. ID x…Read more

]]> 2c386a7446a45dd439f036e05df84cbd bigtinboat replied to the topic 580 CC Tanks in the forum General Chat https://talonairgun.com/forums/topic/580-cc-tanks/#post-277047 Tue, 12 Mar 2019 01:06:31 -0400 quote Anthony266 post_id=389762 time=1552341198 user_id=2:We have now have 580cc carbon fiber tanks.
Brand new just in today from 480 cc to 580 CC..unless your tanks are DOT certified they are illegal to use in the United States..
we now have 580 cc bottles with DOT certification…

Got a link to this “law”?

]]> a3c531cde598f0b033f426e8c805fd0e bigtinboat replied to the topic Foster valve o ring - where buy? in the forum General Chat https://talonairgun.com/forums/topic/foster-valve-o-ring-where-buy/#post-277015 Tue, 05 Mar 2019 00:51:59 -0400 Pretty sure those are -006 o-rings. They come with urethane from factory, but buna n will work. (probably can’t get urethane locally)
-006 are 1/8 x 1/4 x 1/16

]]> c8cfc749e299442dff4b46b990cab5d6 bigtinboat replied to the topic Foster valve o ring - where buy? in the forum General Chat https://talonairgun.com/forums/topic/foster-valve-o-ring-where-buy/#post-277011 Sun, 03 Mar 2019 23:50:31 -0400 In the female foster? If so that’s a -010. Should be able to buy at Home Depot, Lowes, Ace, etc

]]> 52fc67389a48d5c042b73e06ba50068e bigtinboat replied to the topic I knew the air gun laws were coming in the forum BullPup General Chat https://talonairgun.com/forums/topic/i-knew-the-air-gun-laws-were-coming/#post-276977 Mon, 25 Feb 2019 14:00:37 -0400 quote iride post_id=389673 time=1551035486 user_id=100004:I just never seen it worded like that, No I have been in air guns since 1962, Jumped in big time in 1980 ( DR. Beeman). Then took another big jump in 2012 to the Marauder PCP world, Now most of my Powder burners set idle, Except my side arm.
I know in Odessa City limits , If your in your…Read more

]]> 1efb71870007f64f83d8c77f965cd955 bigtinboat replied to the topic I knew the air gun laws were coming in the forum BullPup General Chat https://talonairgun.com/forums/topic/i-knew-the-air-gun-laws-were-coming/#post-276972 Sun, 24 Feb 2019 18:17:09 -0400 Do a bit more searching and I think you will see that the “AirGun” part was added to the law in Jun of 2013, 6 months prior to you joining TAG.

Maybe change the title, that law was “here” before you were.

]]> 04165140a5e54d6b68e57a4872a7d773 bigtinboat replied to the topic Evanix semi autos coming in the forum BullPup General Chat https://talonairgun.com/forums/topic/evanix-semi-autos-coming/page/2/#post-276892 Mon, 28 Jan 2019 05:02:22 -0400 quote miksatx post_id=389530 time=1547896939 user_id=100613:quote iride post_id=389526 time=1547873524 user_id=100004:miksatx
That gun in your photo 177?
It looks big and heavy? And long.
How does it feel?
Mike
Yep it’s .177 weight out of the box 7 1/2lbs scoped 9 1/2 lbs
Big- yes
Heavy- yes
Long- yes, extra long adding a ldc.
Loud- yes and the…Read more

]]> c21d7423c2caea884febd78da8e20830 bigtinboat replied to the topic 177 Vulcan 2 update in the forum Airgun Technology https://talonairgun.com/forums/topic/177-vulcan-2-update/page/4/#post-276496 Mon, 29 Oct 2018 14:08:31 -0400 quote iride:Hell being retired seems like I had more time when I worked 40 hours a week, Hint, NO alarm clock, I wake up when i get up.
Mike

I been having the exact same “problem” for the past 3 years……..ain’t it great. I do set the alarm on Hunting and Fishing days though…..

]]> 13917316c19b8ee563e940a17b78f46d bigtinboat replied to the topic Hoot??? in the forum General Chat https://talonairgun.com/forums/topic/hoot/#post-276330 Tue, 02 Oct 2018 22:06:42 -0400 He was on the “New” yellow 2 days ago…….selling his Taipan, right? isn’t that him?

https://airgunwarriors.com/yellow-airgun-classifieds/25-veteran-compact-for-sale/

]]> 11170f4822828aad2b2bef3426a070aa bigtinboat replied to the topic Neoprene bottle cover? in the forum FX Air Rifles https://talonairgun.com/forums/topic/neoprene-bottle-cover/#post-276054 Mon, 27 Aug 2018 13:52:52 -0400 Is the tank the same as a Talon Tune 480cc tank? If so a 9oz CO2 cover will fit on it. It’s a tight fit but I have one on mine. Ebay also has some camo ones for a bit more.

https://www.discountpaintball.com/Tank-Cover-for-9oz-or-12oz-Co2-Black_p_8815.html

]]> 4dfa2f4491a4642e7344c82111f7ba3e bigtinboat replied to the topic The FX guns are killing me LOL. in the forum FX Air Rifles https://talonairgun.com/forums/topic/the-fx-guns-are-killing-me-lol/#post-275800 Thu, 26 Jul 2018 12:37:52 -0400 Who knows, maybe the FX guys are bustin their owns guns up too and posting they got them like that? :suprisedn:

BTW – only FX I own is a WC .177 so it’s easy enough to fix yourself if something goes wrong. I got $1K in it with the Huma reg, bettin it’s just as much a lazer as the Vulcan only I’m sure it’s much quieter w/o adding $150 to the muzzle.

]]> a021ce9f5d76aed3b2b5767f83df396e bigtinboat replied to the topic The FX guns are killing me LOL. in the forum FX Air Rifles https://talonairgun.com/forums/topic/the-fx-guns-are-killing-me-lol/#post-275778 Tue, 24 Jul 2018 13:39:59 -0400 quote iride:Yea, I never seen a FX in person,
All I know is what I read on them.

Thank goodness you didn’t buy one of those FX guns huh………..

http://talonairgun.com/forum/viewtopic.php?f=54&t=37690

]]> 926cbf2d548b8890d68eafa0e8e09b49 bigtinboat replied to the topic The FX guns are killing me LOL. in the forum FX Air Rifles https://talonairgun.com/forums/topic/the-fx-guns-are-killing-me-lol/#post-275757 Sat, 21 Jul 2018 17:39:14 -0400 quote iride:OK I am not going to bang the FX line,

TOO LATE

]]> 2e57248f30bb03216d2707434680868e bigtinboat replied to the topic 2013 great white tank, five years BOOM!!!!!!!!!!!!!!!!! in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/2013-great-white-tank-five-years-boom/page/2/#post-274981 Tue, 17 Apr 2018 21:26:16 -0400 quote rcontrera:DOT regulation 49 CFR 173.301. Why do you think that pressurized gas bottles require DOT certification? To make sure they are safe when transporting across highways.

Sorry that applies to the “shipment” of hazardous materials. IE – commercial use as opposed to personal use.

Take note to Section A (7)

(7) A cylinder with an…Read more

]]> 9b20a4189649aa0adac3faf6529d728e bigtinboat replied to the topic 2013 great white tank, five years BOOM!!!!!!!!!!!!!!!!! in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/2013-great-white-tank-five-years-boom/#post-274979 Tue, 17 Apr 2018 20:37:58 -0400 quote rcontrera:It is all VERY true. I have been working with high pressure systems and dealing with DOT regulations since the early 70s.

Link to “truth”?

]]> 9135b66fa9154510683c9e153cd25875 bigtinboat replied to the topic 2013 great white tank, five years BOOM!!!!!!!!!!!!!!!!! in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/2013-great-white-tank-five-years-boom/#post-274976 Tue, 17 Apr 2018 19:35:48 -0400 quote rcontrera:Get it hydro tested. It isn’t a scam … it is the law. In order to travel across public streets/highways with a tank, it must be tested to insure it is safe. If someone were to run into you and damage the tank causing an explosion, even though it was someone else’s fault, you would be liable for all damages for transporting…Read more

]]> 2680e3ec22713f26d709e79a21cd55ac bigtinboat replied to the topic New FX Impact.177 FAC in bound!!!(New Pics!!!) in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-fx-impact-177-fac-in-bound-new-pics/page/2/#post-274699 Wed, 21 Mar 2018 13:45:14 -0400 quote iride:Big T B
Is yours a wild cat I or a II
I heard they improved the regulators in the II.
Mike

Mine is a Mk1. I hope they have improved them. When I bought then gun I had figured the Huma would be needed based on my research. After taking the regulator apart I can see why. Compared to a Ninja paint ball regulator the tolerances on this…Read more

]]> bb8bd5b7cb84169dd9a43d61cde01453 bigtinboat replied to the topic New FX Impact.177 FAC in bound!!!(New Pics!!!) in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-fx-impact-177-fac-in-bound-new-pics/page/2/#post-274687 Tue, 20 Mar 2018 14:05:03 -0400 quote iride:airbrained
You still around, Is your 177 FX still working?
Mike

He sold it back in October on AGN.

You might want to look at the Wildcat in .177. Since I couldn’t get a .177 barrel for my Mutant I picked one up. Nice light and balanced gun. Likes the 10.3 and 13.4 jsb the best. Reg is jacked (creeps 15bar overnight) so I have a…Read more

]]> 610f1432d7582bca5233d900a3780fcd bigtinboat replied to the topic New BSA bullpup the Defiant in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-bsa-bullpup-the-defiant/#post-274414 Mon, 26 Feb 2018 14:22:12 -0400 quote kris:Interestingly racknload PB videos are still there, it seems it is airgun related videos are being targeted.
:angrymob:

He had a mixture of both, not anymore

Yeah, the Florida shooter was on the ROTC Air Rifle Team, and apparently “a pretty good shooter”. So I guess they are equating getting proficient with guns thru the use of air…Read more

]]> 9fc35ebac82160d35c3ad2b6f66bab85 bigtinboat replied to the topic NSA .22/23gr slugs thru Mutant standard in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/nsa-22-23gr-slugs-thru-mutant-standard/#post-274376 Thu, 22 Feb 2018 05:58:50 -0400 quote Beach-gunner:Ok thanks Bigtin…maybe we will hear something from The Man Dan :biggrinn: ! How is your Taipan holding up? :4:

Mine is holding up great. Definitely my most accurate gun.

]]> a0486df14259c84d732b155b04b6dce1 bigtinboat replied to the topic NSA .22/23gr slugs thru Mutant standard in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/nsa-22-23gr-slugs-thru-mutant-standard/#post-274364 Tue, 20 Feb 2018 14:37:32 -0400 quote Beach-gunner:Hey BigTin and Dan,

How is the performance of this ammo with your rifels? I have a Taipan Veteran and I just purchased the 21gr hp in .22 and just wondering if either of you have your guns dialed in for best performance yet. Also, Dan, any particular reason you chose the 23gr slug over the 21gr? I’m ready to pop some…Read more

]]> 86c25d9bdf6e5a12eeee4911006b6123 bigtinboat replied to the topic NSA .22/23gr slugs thru Mutant standard in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/nsa-22-23gr-slugs-thru-mutant-standard/#post-274308 Wed, 14 Feb 2018 20:23:42 -0400 quote RONIN001:How did you calculate the BC? Did you chrony it at muzzle and 50 yards?

The manufacturer lists it on his site

https://nielsenspecialtyammo.com/collections/22-caliber/products/23-grain-hollow-point-air-rifle-pellets-217-caliber-air-gun-slug-swaged

]]> d5c42d09cf3c0f587960b6c17dacbf29 bigtinboat replied to the topic new gun on the market, In 177 in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-gun-on-the-market-in-177/page/5/#post-274126 Wed, 31 Jan 2018 16:15:43 -0400 quote miksatx:Wow 20 fpe BTB that’s s pretty tall order for a .177 lol. I don’t know if my mutant .177 could muster 20. Never shoot it over 800 fps if I can help it.

I’m waiting to see what the Hatsan Flash pup has to offer. Should get the 10.3jbs to 900, but would like to see the 13.4’s at 875 or so. That would be perfect I think.

]]> 8790cefcdbb9f3bcb1ef50fb1d877cc3 bigtinboat replied to the topic new gun on the market, In 177 in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-gun-on-the-market-in-177/page/4/#post-274121 Wed, 31 Jan 2018 15:13:40 -0400 quote miksatx:hi BTB welcome back. Yes the mag advance is a weak spot. yeah Jack has busted up a couple parts on his kosak. He just reminded me again not to move the mag backwards lol. He had a pin bust on the bottom piece than moves the mag advance up an down. Every one of these small parts that make these airguns guns work are weak…Read more

]]> 387601775e6505ad4724e18885d46da1 bigtinboat replied to the topic new gun on the market, In 177 in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-gun-on-the-market-in-177/page/4/#post-274117 Wed, 31 Jan 2018 14:02:46 -0400 quote miksatx:Mine doesn’t seem pellet picky so far. Shoots accuracy on par with LW&CZ barrels. I can mix crosman ultras and JSB 10.3 and they shoot to same poi. Out to 20 yrds clocks around 840 fps. Dime size out at 30 yrds. I like that it shoots the ultra mags 10.5 so well. I’ll have to pick up some 7.9 see how well they shoot. My bad news is…Read more

]]> 83a00e0793c5a1bff5c995a14914b8c4 bigtinboat replied to the topic 25 marauder and SS valve in the forum Benjamin Marauder https://talonairgun.com/forums/topic/25-marauder-and-ss-valve/#post-274110 Wed, 31 Jan 2018 04:09:58 -0400 So did you ever get your SS valve installed?

]]> e45aed74a7f530cfd52cb856569ddeb2 bigtinboat replied to the topic 25 marauder and SS valve in the forum Benjamin Marauder https://talonairgun.com/forums/topic/25-marauder-and-ss-valve/#post-273815 Fri, 12 Jan 2018 23:03:37 -0400 Any chance to try that valve?

The below info was sent to me on a guy who installed the valve.

Name: SS With Striker 5 turns from flush. Hammer spring 3.75 turns in.
3 oring buffer orings
3 spring loops cut off factory spring (I do not suggest this as it is a bit too much)
Notes: 3100-2600 psi
Shots: 8
Average: 888 FPS
SD: 8 FPS
Min: 876…Read more

]]> 895bc37382170996a8beb5e6bb56eb9c bigtinboat replied to the topic 25 marauder and SS valve in the forum Benjamin Marauder https://talonairgun.com/forums/topic/25-marauder-and-ss-valve/#post-273802 Fri, 12 Jan 2018 01:40:09 -0400 quote Airgunmann:This isn’t the same old balanced paintball valve . This valve has been put to the test with several people running the prototype . It’s also really efficient and uses poppet design of the war valve I believe

OK, don’t take my word for it. Install it into the gun. See if you can get a decent shot string out of it. Once you think…Read more

]]> 58226cf184266f26d85cf7b25aec15ad bigtinboat replied to the topic new gun on the market, In 177 in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-gun-on-the-market-in-177/#post-273774 Tue, 09 Jan 2018 22:23:15 -0400 quote Anthony266:Have some .22 and .177 on the way….

Any idea on pricing?

]]> baf83955d647cecc3bf4cb67b5b15287 bigtinboat replied to the topic new gun on the market, In 177 in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-gun-on-the-market-in-177/#post-273772 Tue, 09 Jan 2018 19:23:42 -0400 Looks like they are “currently” out of .177’s at AirGunHeaven, the only retailer that will ship to USA.

Such a shame, my neighbor had one on order. I would have gotten to actually see/shoot it prior to ordering.

]]> 686f7ece9711dff60d413fd7764f9bcd bigtinboat replied to the topic 25 marauder and SS valve in the forum Benjamin Marauder https://talonairgun.com/forums/topic/25-marauder-and-ss-valve/#post-273763 Tue, 09 Jan 2018 03:11:25 -0400 Is that the valve that’s like those old balanced paintball valves? With orings on the piston inside the valve? If it is I’d sell it instead of installing it. Otherwise you are just asking for problems. If you do install it just keep checking your gun with a chrony. You’ll see. Un-lubed o-rings don’t last forever. Even while they are new you will…Read more

]]> 65ab042ac17c6f765048e72e753ef748 bigtinboat replied to the topic Ted still bashing the Mutant bullpup airgun in the forum BullPup General Chat https://talonairgun.com/forums/topic/ted-still-bashing-the-mutant-bullpup-airgun/page/2/#post-272686 Tue, 21 Nov 2017 15:07:10 -0400 quote AAS410:If I had an ax to grind I would have been posting this all along but many months or maybe years since I last posted about this. I was just reminded when I stumbled across that video.

Let me get this right – you have no axe to grind, but you were reminded how Ted “bashes” the mutant by seeing a video (from a year ago) that doesn’t…Read more

]]> bbd6a9099c8cfc80b707b8baaae2fe44 bigtinboat replied to the topic Ted still bashing the Mutant bullpup airgun in the forum BullPup General Chat https://talonairgun.com/forums/topic/ted-still-bashing-the-mutant-bullpup-airgun/#post-272576 Fri, 17 Nov 2017 14:21:03 -0400 quote AAS410:quote SECoda:Sounds like you have an ax to grind. That video is from over a year ago.

No axe to grind. Just stumbled across that video.

You might get more people on you side if you had not started your post of with “Ted still bashing the Mutant through his youtube channel.”, but it is OLD and not really current, so how is he…Read more

]]> 2cd8ca81233204f3299c1953f63090f2 bigtinboat replied to the topic Bulldog hits Airgundepoe golf ball at 308 yards in the forum BullPup General Chat https://talonairgun.com/forums/topic/bulldog-hits-airgundepoe-golf-ball-at-308-yards/#post-272101 Sat, 28 Oct 2017 12:58:42 -0400 quote Nomadic Pirate:Hmmm, interesting post.

I had a Bulldog and I also had an American Air Arms Slayer .357 and the Bulldog can’t even lick the Slayer boots and those are both Magazine fed .357 Pups.

I will go to ask the expert but I really doubt that the Bulldog can get 10 shots at 250 FPE, really, really doubt it.

Why the doubt? He adds more…Read more

]]> de32d526418ee34f0c3d3ed858c95f76 bigtinboat replied to the topic Texan spring purchase from AAO in the forum Texan https://talonairgun.com/forums/topic/texan-spring-purchase-from-aao/#post-270198 Fri, 14 Jul 2017 13:34:15 -0400 quote boonez40:quote BigTinBoat:as an FYI – Appalachian Airgunner is already doing that. He is apparently the US distributor for the AAO products. I got my set of springs for $32 delivered. ($25 + 7 shipping)
I checked their web and did not see the springs listed

Sent from my SM-N920R4 using Tapatalk

I found him on facebook. He does not have…Read more

]]> e4df84e0d3342a212764b9cd4bcddfd4 bigtinboat replied to the topic Texan spring purchase from AAO in the forum Texan https://talonairgun.com/forums/topic/texan-spring-purchase-from-aao/#post-270105 Fri, 07 Jul 2017 22:26:16 -0400 as an FYI – Appalachian Airgunner is already doing that. He is apparently the US distributor for the AAO products. I got my set of springs for $32 delivered. ($25 + 7 shipping)

]]> b652b6a661add56924720e3693be5793 bigtinboat replied to the topic Texan Power Adjustment in the forum Texan https://talonairgun.com/forums/topic/texan-power-adjustment/#post-267540 Mon, 20 Mar 2017 15:15:11 -0400 quote yoteloco:Right. Then you will find best spot for that bullet. I’ve also found that sometimes the max velocity gives a big drop in fps of the next shot so I’ll back off to a point where I get three shots closer in fps to each other. I had some 49 gr bullets doing 1251 fps with the 308 but next shot was 1230 ish so I backed the wheel the other…Read more

]]> a043372ea6f645dd2f16ff21e72c89c7 bigtinboat replied to the topic Texan Power Adjustment in the forum Texan https://talonairgun.com/forums/topic/texan-power-adjustment/#post-267531 Mon, 20 Mar 2017 13:17:51 -0400 Good information.

I haven’t yet gotten to the range (can’t shoot the Texan in my 25yd backyard) but basically the way I understand the adjustment is this.

Turned “down” towards the butt increases the spring tension and will get you the max velocity on the lightest slugs. Then as your slug weight increases you can lower the spring tension…Read more

]]> b54829886e1740b4bfa495996793da8c bigtinboat replied to the topic Upgrades for texan AFRICAN AIR ORDNANCE any reviews? in the forum Texan https://talonairgun.com/forums/topic/upgrades-for-texan-african-air-ordnance-any-reviews/page/2/#post-267513 Sun, 19 Mar 2017 22:59:49 -0400 quote Dyotat100:I think it was cooked up by someone. Might have been RL for all I know. I called RL and they said a customer called in and said his valve failed. Thats all I could get out of them. Well AAO contacted all of the people that have purchased the valve and no one has had a failure.

Glad to hear no gun actually blew up.
Glad no one got…Read more

]]> d1c8738f486c5b0e16317e32495ffdf0 bigtinboat replied to the topic Upgrades for texan AFRICAN AIR ORDNANCE any reviews? in the forum Texan https://talonairgun.com/forums/topic/upgrades-for-texan-african-air-ordnance-any-reviews/page/2/#post-267510 Sun, 19 Mar 2017 21:36:17 -0400 quote Dyotat100:Yesterday it was posted on the AF Facebook group page that one failed and destroyed a gun. It’s a closed group so still waiting on more info. RL airguns told one of the members.

SO anymore info on this? I don’t facebook so can’t get into that group but I’ve searched high and low and can’t seem to find any kind of documenting info…Read more

]]> 93738bf66c25c5774df660bcc1fd9be9 bigtinboat replied to the topic Upgrades for texan AFRICAN AIR ORDNANCE any reviews? in the forum Texan https://talonairgun.com/forums/topic/upgrades-for-texan-african-air-ordnance-any-reviews/#post-267424 Fri, 17 Mar 2017 15:30:41 -0400 Looks like the “upgrade kit” is now gone from the AAO website.

http://www.africanairordnance.com/424820687/category/625616/airforce-texan

]]> 0f83028754782d9acf12c036a90b20fb bigtinboat replied to the topic Questions - Texan set-up for WhiteTail Deer in the forum Texan https://talonairgun.com/forums/topic/questions-texan-set-up-for-whitetail-deer/#post-266264 Tue, 14 Feb 2017 13:47:10 -0400 quote Huntingjeff44:Bigtinboat when did md pass it ive been watching this for years i no they put it up last year but I didn’t hear it passed. Not doughting you just want to be sure because the 2017 laws still said there legal but must make 1200 ft lbs.

It passed in November of 2016. You can never fully rely on the Hunting Book DNR puts out.…Read more

]]> 252641a200a0d9a271d5d7123a2a91a1 bigtinboat replied to the topic Questions - Texan set-up for WhiteTail Deer in the forum Texan https://talonairgun.com/forums/topic/questions-texan-set-up-for-whitetail-deer/#post-265591 Tue, 31 Jan 2017 05:14:06 -0400 Well that stinks, a muzzle loader scope is exactly what I was thinking of. I guess once you go AO it’s hard to go back. Good to see the 340 size works. He gave me a bunch of 350’s. Hope to get out shooting it soon.

]]> d33f1d3c555e7caec17520dc8f5134c5 bigtinboat replied to the topic Carette 4500 PSI Compressor Report in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/carette-4500-psi-compressor-report/page/3/#post-263147 Wed, 14 Dec 2016 17:40:54 -0400 Over 6 months since this saga started…….I’ve lost interest……..unscribed

]]> 7330d0c8b0603dcbb47be2f05a7d84a6 bigtinboat replied to the topic New $210 Tuxing 4500psi compact compressor in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/new-210-tuxing-4500psi-compact-compressor/page/3/#post-263013 Mon, 12 Dec 2016 01:24:03 -0400 quote MJP:Wingman, where did you buy that 500cc composite bottle? Care to share the link?
Marko

Alibaba would be my guess

https://www.alibaba.com/product-detail/500cc-capacity-compressed-air-cylinder-Carbon_1571668817.html

]]> cc39517f65d39c90bacf9d408f499c9b bigtinboat replied to the topic Carette 4500 PSI Compressor Report in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/carette-4500-psi-compressor-report/page/2/#post-262442 Sat, 03 Dec 2016 02:57:43 -0400 quote LarryW22:Dear guykuo, is there a need for a ransom collection???

Just asking????
Regards
LarryW 😉

Sumptin funny going on here. If you click on Guykuo’s profile there is nothing in the “Last Active” section, and this appears to have been his final post……back on the 28th

]]> d236abe34ac20fd7b328b180d4a68a47 bigtinboat replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/18/#post-259297 Tue, 04 Oct 2016 15:43:04 -0400 quote TalonSniper:Before considering buying a Mrodair.com Compressor be forewarned many have found it to be nothing but trouble dealing with the machine as well as the vendor

And yet AGAIN here is is F’ing with someone’s $$$$$$$.

He got the guy for a bum compressor and then accepted the return with $$$ added for a Huben. Huben wasn’t up to par…Read more

]]> bd69e0a2fa9c75d8cf6974ddb83de42a bigtinboat replied to the topic Looking for some tank valve advice. in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/looking-for-some-tank-valve-advice/#post-258960 Sun, 25 Sep 2016 12:29:28 -0400 quote knifemaker:If the threading from a standard SCBA tank valve will fit, they are available on the Bay most days. I think I paid 49.)) for the last one I bought to replace a worn out one on my 88cf Scott.

Knife

Thread is different. I have seen some instances where someone has re-threaded a paintball tank to accept a standard SCBA valve, but…Read more

]]> 03ba9278cc01f602a081f9cc9c22bcae bigtinboat replied to the topic Huben K1 showed up today in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1-showed-up-today/#post-258655 Fri, 16 Sep 2016 13:50:40 -0400 quote darryl:Well crap! After reading of the accuracy issues had by a Huben owner over on Airgun Nation, I was optimistic about the owner who posted on the Yellow. Now I’m reading this thread after that guy’s gun was sent back to MrodAir. It seems the K1 was not designed with the American shooter in mind. It’s powerful, a semiautomatic, relatively…Read more

]]> 707e9fbfaaf5d02bd05e23500b5d3a2d bigtinboat replied to the topic Huben K1 showed up today in the forum Other BullPups https://talonairgun.com/forums/topic/huben-k1-showed-up-today/#post-258633 Thu, 15 Sep 2016 17:12:47 -0400 quote tkerrigan:I’m holding off doing the 50yd groups until my glasses show up, about 9 days from now. I just had double cataract replacement in the last 5 weeks. It just loves the JSB 34gr beasts, they fit perfect in the mag. Regards, Tom

Shoot at 50 yet?

Guy on the Yellow was having trouble with his at distance. He posted that MRodAir told…Read more

]]>