Talonairgun | bodhisdad | Activity https://talonairgunforum.com/members/bodhisdad/activity/ Activity feed for bodhisdad. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 53369cff5da482784c0b53573decffe1 bodhisdad replied to the topic Is a TalonSS for me? in the forum General Chat https://talonairgun.com/forums/topic/is-a-talonss-for-me/#post-39584 Sun, 25 May 2008 13:18:38 -0400 Maybe get a tuned one. As any out of the box would work fine i suspect, some fine tuning maximizes the entire setup. You’d also need to baffle the frame of a TSS to fully appreciate the silence is golden rule.

]]> 9537206dd770ff5b3c716565a96fe8fb bodhisdad replied to the topic Getting a Tony tuned Talon .22 - have some questions in the forum Talon/Talon SS https://talonairgun.com/forums/topic/getting-a-tony-tuned-talon-22-have-some-questions/#post-39545 Sat, 24 May 2008 13:21:14 -0400 I agree, the only down side is purchase of the 18″ barrel. But with the Tss frame, the 18″ barrel comes just to the end of frame making a cleaner looking fit. All you need then is 6″ of shroud to quiet things down. The frame/barrel length is the only difference between the two. If anything Tony will have you purchase a heavier hammer rather then a…Read more

]]> d3c05de4b9663832e5e9fcfb9cee7c6d bodhisdad replied to the topic Leaving the power wheel set to high in the forum General Chat https://talonairgun.com/forums/topic/leaving-the-power-wheel-set-to-high/#post-39145 Thu, 15 May 2008 15:45:02 -0400 If the brech is not cocked then there is little load on the spring. On the other hand if the brech is cocked then left for some time it could, maybe cause some spring fatigue. I have never read of such a thing though.

]]> 9bea75e4bad9dd8ed6fa551d8f1096d9 bodhisdad replied to the topic Crosman has a new "Top Secret" PCP in the works in the forum Other Guns https://talonairgun.com/forums/topic/crosman-has-a-new-quot-top-secret-quot-pcp-in-the-works/#post-39141 Thu, 15 May 2008 14:52:46 -0400 Pistola would be nice

]]> f1b0d10888b4700144b7899f5509edb6 bodhisdad replied to the topic The next big thing in the AirForce world? in the forum General Chat https://talonairgun.com/forums/topic/the-next-big-thing-in-the-airforce-world/page/2/#post-39093 Wed, 14 May 2008 12:44:25 -0400 I’d rather have a multi shot over a regulator. Most other PCP companys have this available on their AGs. One shot one kill is a nice concept, but it doesn’t always work that way. Took a starling and 3 of his comrades hung around to see what was going on. Doves, pigeons are either too dumb or layed back to fly far when one is shot. So there is…Read more

]]> 0de1ef505d8353434270f768652bf53e bodhisdad replied to the topic I have created a monster! in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/i-have-created-a-monster/#post-38752 Tue, 06 May 2008 22:57:43 -0400 Thats what i was thinking. When i mentioned my test, they were on in the room, but had incandescents over the sky screens. Still registered very high 100+fps, something about the flourescents blinking faster then the eye sees the blinking.

]]> 3a3d16840905d711773c90d1160e64bc bodhisdad replied to the topic VALVE HELP in the forum Mods/Machinists https://talonairgun.com/forums/topic/valve-help/#post-38728 Tue, 06 May 2008 12:20:55 -0400 If that doesn’t work, boil your tank in a kettle of water for 15min. or so. I use a steel rod that fits snug in the hole, after heating the valve/tank up, the tank goes in a vice and rod in the valve collar. I try by hand to turn it off, if that doesn’t work a couple of whacks with a hammer will loosen the connection.

]]> a3050cef2ea8d6a1f0f624cbac221014 bodhisdad replied to the topic I have created a monster! in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/i-have-created-a-monster/#post-38727 Tue, 06 May 2008 12:17:53 -0400 That sucks, but explains alot. I tried the flourescents once just to see what happened. Why, because they say don’t do it, it really has a adverce effect on your shot string 😕 . I use 2 shop lights with 75watt incandescents, cords wrapped around a water pipe and suspended just above the sky lights. There can be no flourscents on in the room. Send…Read more

]]> d976668522b53455347a9d25d6781d31 bodhisdad replied to the topic I have created a monster! in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/i-have-created-a-monster/#post-38679 Mon, 05 May 2008 14:14:30 -0400 I was refering to what pics of the valve work, if you say its getting those numbers, i have no reason to see a pic of the chrony. No flourescent lights were on i assume, i know this will increase velocity.

]]> 81a4232b58ce66188a68645c39de21c2 bodhisdad replied to the topic I want to buy a valve for my gun? in the forum General Chat https://talonairgun.com/forums/topic/i-want-to-buy-a-valve-for-my-gun/#post-38651 Sun, 04 May 2008 12:56:42 -0400 You can purchase the whole unit for $105 or near that. Or purchase just the internals and swap out the solid valve body for around $55 instead. Send AF a e-mail, and ask for a full price list of all available parts, as well as the valve of your choice. The prices we have uncovered are in the reference area. I have hit them up for the fullprice…Read more

]]> 8ccb13de07200f321c9bea227373ce01 bodhisdad replied to the topic I have created a monster! in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/i-have-created-a-monster/#post-38648 Sun, 04 May 2008 12:30:18 -0400 Riff the majic number is the 18″ barrel mikes using. He’s giving up around 60fps to the 24″.

Post a string when you can Mike, a pic wouldn’t be bad either. 😉 Its good to see my kid ain’t the only pig out there either.

]]> 755223bfb39f00de0f9e769266bf0dd1 bodhisdad replied to the topic Handmade Walnut Condor Stock in the forum Talon/Talon SS https://talonairgun.com/forums/topic/handmade-walnut-condor-stock/#post-38618 Sat, 03 May 2008 13:07:49 -0400 Metallica 😈 sweet, nice work. I’d have to agree on the walnuts workability it works, carves, sands, beautifully. I’m sure there are other woods out there which do the same, but i enjoy working with walnut its very predictable.

]]> f2c6eade8d2f9b9e4cded00fc727b52a bodhisdad replied to the topic .25 w/ condor valve, how many shots in the forum General Chat https://talonairgun.com/forums/topic/25-w-condor-valve-how-many-shots/#post-38575 Fri, 02 May 2008 15:17:40 -0400 I think its possible, you’d have to start with adjusting the tophat and see if you can get it close. If so then its a matter of adjusting the pre-load on the PW. If not you may have to try changing out the valve spring to get the desired result. The 75fps spread would be easier then 50fps to achieve and would give you a better shot count for sure.…Read more

]]> 86e8d4b0e8b04fe7a656f5299804ef1e bodhisdad replied to the topic bussy boy in the forum General Chat https://talonairgun.com/forums/topic/bussy-boy/#post-38573 Fri, 02 May 2008 14:18:01 -0400 Very nice, I’ll be trying my hand at something similar soon with a IZZY-46 😉 . I can only hope it will turn out at least as nice.

]]> 9ac8d83fc2b0d9ffcdf89a88991908e5 bodhisdad replied to the topic PYRAMID AIR REPORT FRIDAY MAY 2ND. GOOD READING in the forum General Chat https://talonairgun.com/forums/topic/pyramid-air-report-friday-may-2nd-good-reading/#post-38571 Fri, 02 May 2008 13:52:12 -0400 But, there is always a silver lining. I wouldn’t have learnt so much about pcp if I hadn’t bought a Condor that came with the CVS. It’s like getting thrown into the deep end learning to swim the first time.

😆 😆 Ain’t that the truth, necessity is the mother of invention. Its a good thing they’re such a easy platform to work from.

]]> f79cf33f1beec513dbc5ba16b1f82ea0 bodhisdad replied to the topic PYRAMID AIR REPORT FRIDAY MAY 2ND. GOOD READING in the forum General Chat https://talonairgun.com/forums/topic/pyramid-air-report-friday-may-2nd-good-reading/#post-38564 Fri, 02 May 2008 13:11:49 -0400 I got a kick out of the read as well. Sam, don’t open your tophat all the way. all your going to do is waste a bunch of air and drop your shot count to around 20 :?. The reason Condors in the days were sent back is because they had a spring in the valve which was way to heavy, funny Tom didn’t mention this 🙄 . Shoot over your chrony a few…Read more

]]> c460867c23c43af8789369a9132c073b bodhisdad replied to the topic Toilet Bashing with a .25 Condor in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/toilet-bashing-with-a-25-condor/#post-38562 Fri, 02 May 2008 12:41:22 -0400 Sweeeet 😀

]]> bb4e9153cddefac71021355183d794c4 bodhisdad replied to the topic Good News/Bad News - Pyramyd Air in the forum General Chat https://talonairgun.com/forums/topic/good-news-bad-news-pyramyd-air/#post-38523 Thu, 01 May 2008 13:08:03 -0400 I’ve read alot about this issue concerning them. I know they have good prices, but are the headaches worth it?

]]> d0cf5b1cd61a16dcafa7c623343fbe1a bodhisdad replied to the topic WARRANTY:what can you do and what CAN'T you do? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/warranty-what-can-you-do-and-what-can-t-you-do/page/2/#post-38522 Thu, 01 May 2008 12:23:08 -0400 Thats a loaded question, if i tried Cps they would be going near 1200fps. Adam has his rig set to shoot CPs at 950, so Kodiaks being heavier @21.1g are going to shoot about 100fps slower. Pick a pellet which shoots good in the barrel and do your best to get it around 950/ 975fps to start. Thats about as much as you want to push a pellet. Thats not…Read more

]]> 58e6f25ff8ead37ea141f9cbcabb8178 bodhisdad replied to the topic Modifying calipers for top hat measuring. in the forum General Chat https://talonairgun.com/forums/topic/modifying-calipers-for-top-hat-measuring/#post-38521 Thu, 01 May 2008 11:55:59 -0400 A template of sorts is fine, but if you have a set of feeler gauges i see no reason not to use them, saves time in making a template. Once the tophat is set where you want it, add blue thread locker to the screws and leave it be. The problem is no two tank, valve combinations are the same few of us set the tophats to the same exact gap. .071 seems…Read more

]]> 58923c05951dd669786e09f2bf3517ad bodhisdad replied to the topic Who reconizes this scope mount on this Izzy?? in the forum General Chat https://talonairgun.com/forums/topic/who-reconizes-this-scope-mount-on-this-izzy/#post-38500 Wed, 30 Apr 2008 22:26:51 -0400 I found this on Dave G’s website awhile ago. Really caught my eye, far as i can tell it looks to me like a shroud on the end. Then the very nice stock and the cantilevered scope mount which really sets things off. Don’t know if i’ll go with a small scope or a red dot. I really like the Walther PS22 its got a cantileverd weaver base which would…Read more

]]> 46c105b604af397a861b1b62d2ba9356 bodhisdad started the topic Who reconizes this scope mount on this Izzy?? in the forum General Chat https://talonairgunforum.com/forums/topic/who-reconizes-this-scope-mount-on-this-izzy/ Wed, 30 Apr 2008 14:00:58 -0400 I’m going to try something like this on a Izzy. Anyone seen and/or know where to get a base like this? I like the swept back look of these.


]]> a72e525bdc0353aa8d3c029718a9e3a4 bodhisdad replied to the topic Zeiss in the forum Optics/Nightvision https://talonairgun.com/forums/topic/zeiss/#post-38476 Wed, 30 Apr 2008 13:21:06 -0400 Excellant glass, thats the lens i have in my Sony digi camera. At the review center its said the glass alone is worth more then the camera 😯 It is capable of better pics then i.

]]> 346f40edd73b9e75ca4d0183689f01f7 bodhisdad replied to the topic Already Impatient in the forum Talon/Talon SS https://talonairgun.com/forums/topic/already-impatient/#post-38475 Wed, 30 Apr 2008 13:15:41 -0400 With a stock valve you’ll see right around 90fps, modd that valve and add another 100fps to it.

]]> 442de7e3f85dbc56ee27b9c5c2e97758 bodhisdad replied to the topic AAA Condor and 42.8gr EunJin's in action in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/aaa-condor-and-42-8gr-eunjin-s-in-action/#post-38474 Wed, 30 Apr 2008 13:08:53 -0400 Thats why i need to get a .25 the carnage is beautiful. Might have one on the way soon. 😆 Can’t wait to see what it will do with Sean’s valve.

]]> 8f01ac09eb728db45acf1a403e4c6a10 bodhisdad replied to the topic What a pisser in the forum General Chat https://talonairgun.com/forums/topic/what-a-pisser/#post-38473 Wed, 30 Apr 2008 13:06:20 -0400 The 18″ is a right nice size. Have you tried posting a want ad? all you need to keep her quiet is 12″ of ali tubing 😉

]]> 9cc183e4c1409cfa3d3890f642556251 bodhisdad replied to the topic Silencers in the forum General Chat https://talonairgun.com/forums/topic/silencers/page/2/#post-38472 Wed, 30 Apr 2008 12:58:50 -0400 WOK, 😮 dam got me when i wasn’t looking, thats low, dishonest. Only if you come and try to put it on 😈 .

Shadoh, we all now Voltar is a grumpy old bastard, who jumps on folk from time to time. I don’t put much stock in his rants. Only when hes got something to say about our rigs 😆 . He and I had words a couple, few years ago. All…Read more

]]> 1fe086a1b3f4ecc873d24049e23a906a bodhisdad replied to the topic Length vs Girth in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/length-vs-girth/page/2/#post-38435 Tue, 29 Apr 2008 14:01:57 -0400 Yes it is!

]]> 3aef28ee7b83238a774d5d6832a1f241 bodhisdad replied to the topic hello ! Ask a question.Thank you very much~~ in the forum General Chat https://talonairgun.com/forums/topic/hello-ask-a-question-thank-you-very-much/#post-38434 Tue, 29 Apr 2008 13:59:28 -0400 Adam, what gave him away? 😆
There should be a ban on all copy righted infringement imports. I wonder how many billions this economy looses to this.

]]> 10545dc73736db55a5fc5c6a3a1ad579 bodhisdad replied to the topic 32gr .22cal eun jin jet pellets in the forum General Chat https://talonairgun.com/forums/topic/32gr-22cal-eun-jin-jet-pellets/#post-38372 Mon, 28 Apr 2008 13:38:55 -0400 Thats what the doctor called for 32g is just about right for 40/45fpe and up. I’ll be waiting for those and quick to purchase.

]]> d7436a836ccd74c83f848619a0f14c77 bodhisdad replied to the topic lightweight scope in the forum Optics/Nightvision https://talonairgun.com/forums/topic/lightweight-scope/#post-38371 Mon, 28 Apr 2008 13:26:45 -0400 A 6 powered mag might be better, something like the leapers bug buster. I like shooting/plinking on 8X, don’t know why just seems like that is where i ended up. Alot of guys have problems with the leapers mostly keeping zero when you set the rig down and pick it back up a day or two later. Mine does it, i just take a few shots inside a re-zero.…Read more

]]> 9a1c6d62c8833c3a6beb364ea71f1526 bodhisdad replied to the topic WARRANTY:what can you do and what CAN'T you do? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/warranty-what-can-you-do-and-what-can-t-you-do/#post-38367 Mon, 28 Apr 2008 12:25:38 -0400 Frag the warranty, not worth the paper it was printed on. This forum is the only reliable warranty anyone needs.

]]> 4c45c6d2d94ad7c15758c7e5e7f5298c bodhisdad replied to the topic light weight tank in the forum Talon/Talon SS https://talonairgun.com/forums/topic/light-weight-tank/#post-38366 Mon, 28 Apr 2008 12:23:38 -0400 Look at the AF edge and send a e-mail to AF inquireing about the cost of just a tank. Might want to ask if the threads are the same between the talon/condor and the edge. The just remove your valve from the big tank and screw into the edges if they are compatable. Less shots but alot lighter.

]]> 7bb2148db314b6289482434a3164d144 bodhisdad replied to the topic .22 JSB Jumbo vs. Kodiaks in the forum General Chat https://talonairgun.com/forums/topic/22-jsb-jumbo-vs-kodiaks/#post-38319 Sat, 26 Apr 2008 22:08:07 -0400 In the real world the only advantage a Kodiak has over a JSB is greater range potential. A shot at 10-60yds which most of hunt at, hit with either pellet in the K-zone its a gonner. JSBs where marginally more accurate when i had my TSS set up shooting around 850/900fps. If you like those try the preds, one holers at 30yds is very possible.

]]> ec11539c9bba93ab2cce02c0c0b807a9 bodhisdad replied to the topic I NEED HELP SETTING UP A CHRONY DATA LOG...going today in the forum General Chat https://talonairgun.com/forums/topic/i-need-help-setting-up-a-chrony-data-log-going-today/#post-38300 Sat, 26 Apr 2008 14:13:50 -0400 By 25 shots you will know how consistent your shooting. I’d keep the preload high like 10 on the PW, as i still read about problems with the valve opening fully. Which is fine to start lower then climb to high velocity and back down you’ll end up closer to the avg. velocity and do it with more shots. Now that i know what your shooting, you should…Read more

]]> afbe1ab3ebafc1f6adc8af04bf99030f bodhisdad replied to the topic SMALL HARD GUN CASE TO ACCEPT FOAM FROM A.F. BOX in the forum General Chat https://talonairgun.com/forums/topic/small-hard-gun-case-to-accept-foam-from-a-f-box/#post-38299 Sat, 26 Apr 2008 14:07:23 -0400 Look at breakdown shotgun cases.

]]> 1a4abb32a8d33f8491a11e845762e123 bodhisdad replied to the topic Micrometer Tank - real world shot numbers? in the forum General Chat https://talonairgun.com/forums/topic/micrometer-tank-real-world-shot-numbers/#post-38298 Sat, 26 Apr 2008 14:04:48 -0400 Thing is to get as many shots as the MM valve gets, its at the sacrifice of velocity. CPs at 1000fps or as close as, first i would need to know where your at, and what your shooting with. Then you need to fine tune the tophat for consistency, find the sweet spot. This is defined when you get a balance between power and loss of FPS per shot. You…Read more

]]> b09c000b7164b1cdfc885a5ea97b0802 bodhisdad started the topic How many in the .25 tin from EJ in the forum General Chat https://talonairgunforum.com/forums/topic/how-many-in-the-25-tin-from-ej/ Thu, 24 Apr 2008 18:26:03 -0400 How many pellets do you get in the tin of .25 pointed EJs.

]]> ccc25ba8308f397c55a7734005039ed1 bodhisdad replied to the topic Heaviest pellet in .22cal on the market? in the forum General Chat https://talonairgun.com/forums/topic/heaviest-pellet-in-22cal-on-the-market/#post-38249 Thu, 24 Apr 2008 18:19:42 -0400 quote Animal Mother:Daystate makes a 40gr pellet but I think they can only be used in the 80fpe air ranger.

Like TT said, its chambered for .223 never tried them, but know for certain that .22 lr rounds fit to tight in a .22 airgun barrel. The Eley Magnums are a tight fit also, but the heaviest commercialy available 300 for $30 kinda high priced.…Read more

]]> 5f83c25666eb9ecf13ab6069f4003ca9 bodhisdad replied to the topic Laser Sight for Talon SS in the forum General Chat https://talonairgun.com/forums/topic/laser-sight-for-talon-ss/#post-38242 Thu, 24 Apr 2008 14:46:45 -0400 I also have the BSA laser, better then the crosmans by far. Has the on/off switch on the laser and the cord for continuious on as long as its depressed, off if its not pressed. Easy to adjust for POI and lots of adjustment travel to get it right, good solid mounts comes with the laser. For the quality and size this could sell for more then its…Read more

]]> a61c9fb33da73215bf9ba21be8a10861 bodhisdad replied to the topic fx revolution vs. fx monsoon in the forum Other Guns https://talonairgun.com/forums/topic/fx-revolution-vs-fx-monsoon/#post-38159 Tue, 22 Apr 2008 14:31:30 -0400 Heres a deal on a loaded Wolf, not a whole lot more then the ones your looking at. http://www.airgunadvice.net/viewtopic.php?t=7605

]]> 699fbe07909ce598c6c28ee2e49b3cae bodhisdad replied to the topic JUST FIGURED I'D POST A PICTURE OF THE LOVE OF MY LIFE. in the forum TAF Gallery https://talonairgun.com/forums/topic/just-figured-i-d-post-a-picture-of-the-love-of-my-life/#post-38142 Mon, 21 Apr 2008 21:25:03 -0400 So what do you do with all the rat carcasses?

Saving the pelts to make a coat for the love of his life. 🙂

Looking good Mike.

]]> fd21255664c7b52eec1368f9e830961a bodhisdad replied to the topic fx revolution vs. fx monsoon in the forum Other Guns https://talonairgun.com/forums/topic/fx-revolution-vs-fx-monsoon/#post-38128 Mon, 21 Apr 2008 15:59:44 -0400 FX, Logun same manufacturer for awhile, my bad. Both lines are built solid. If i was looking in that price range i’d consider(purchase) a Theoban Rapid MK-II or Daystate Airwolf. Main reason would be the mods available and ease of service. Very easy to go from 30fpe to 50fpe and inbetween. With shrouds the Rapids are said to be fart quiet, just a…Read more

]]> 8f4d6a8bc3859dc57fedcfff32470c41 bodhisdad replied to the topic don't laugh too hard..talon ss shot in the forum Talon/Talon SS https://talonairgun.com/forums/topic/don-t-laugh-too-hard-talon-ss-shot/page/2/#post-38122 Mon, 21 Apr 2008 14:44:30 -0400 Thermopanes so clear you don’t know they are there 😆 . I like it KM
Ironbrad look at baffle configurations in the shroud area, a trip to the hardware store and $5 you’ll be quiet enough to shoot outdoors. The TSS is easy to quiet down.

]]> e55a448868870ccb699dba6ed9497449 bodhisdad replied to the topic fx revolution vs. fx monsoon in the forum Other Guns https://talonairgun.com/forums/topic/fx-revolution-vs-fx-monsoon/#post-38119 Mon, 21 Apr 2008 13:15:26 -0400 Neither, i’d go with a F/X S-16

]]> f33657be5c2b40e671dee1230e20de5a bodhisdad replied to the topic Micrometer Tank - real world shot numbers? in the forum General Chat https://talonairgun.com/forums/topic/micrometer-tank-real-world-shot-numbers/#post-38118 Mon, 21 Apr 2008 13:13:30 -0400 That could be a waste of money, do you have a chrony? If not that would be a better investment. You can get the same effect by shimming the tophat and reducing the amount of travel it currently has. Black ops was playing with this and posted some very good numbers. Save your money, and get a hole punch for paper. Use it on some ali cans and make…Read more

]]> 1d88fdb22f08c40c63ea9415d095a516 bodhisdad replied to the topic don't laugh too hard..talon ss shot in the forum Talon/Talon SS https://talonairgun.com/forums/topic/don-t-laugh-too-hard-talon-ss-shot/#post-38095 Sun, 20 Apr 2008 23:09:41 -0400 .22 cal at 20′? Best to turn down the power, on the wheel. 2″ of the duct seal would serve well.

]]> 26d96987077e63ebde8f1f6c9e1b2351 bodhisdad replied to the topic don't laugh too hard..talon ss shot in the forum Talon/Talon SS https://talonairgun.com/forums/topic/don-t-laugh-too-hard-talon-ss-shot/#post-38094 Sun, 20 Apr 2008 23:07:06 -0400 😆 😆 😆 😆 😆 😆 😆 😆 😆 😆 😆 😆 😆 😆
Well you said don’t laugh, couldn’t help myself.
May i suggest open window be on top of the list? Thats a tough one to explain to the lady of the house. Whats the dimensions of that window, looks like a big one. I shot my shroud of the gun a couple…Read more

]]> f9ae8d5941c253ff932473c9edd288be bodhisdad replied to the topic striker weight/valve theory in the forum General Chat https://talonairgun.com/forums/topic/striker-weight-valve-theory/#post-38072 Sun, 20 Apr 2008 13:42:22 -0400 I have a brass 70g hammer, that i used with excellant results, when i had my modded Talon valve in. I still use it with Blodnobs valve. With the tophat set at .058, PW10, 21.1g Kodiaks, TSS 12″ barrel. I rounded the numbers to the nearest whole number dropping the decimal. I’d rather have a curve for a string but this one is pretty consistent…Read more

]]> c47285cbf281b42db8ec3836f6ac3bb2 bodhisdad replied to the topic Talon valve spring retainer setting in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-valve-spring-retainer-setting/#post-38067 Sun, 20 Apr 2008 12:22:45 -0400 It should be doable, Psion has a similar setup .20, high-flo valve and posted a awesome 35 shot string and he was just peaking on the velocity on shot 35. He still had the other side of the string to shoot. Pretty impressive, i’d PM him to get specifics like tophat setting, hammer weight, pellet used and so on. Your 2,3,4 tests aren’t bad at all,…Read more

]]>