I thought I would be upset without my stealth but this is great.

I am still waiting for the call from the guys at KWG about my sako and I bet it will be today because the wind is up with gusts…

i am getting a harris bipod with it but not sure which to get. i am wondering about this one – http://www.harrisbipods.com/HB25.html – as i would like to take prone and kneeling shots from it.

will…Read more

I filled to 3000psi and started shooting until i fell off of the regulator.

1. 890 – id say the reg needs to settle down after the fill for this shot
2. 929 – id say the reg needs to settle down after the fill for this shot
3. 923 – id say the reg needs to…Read more

I think it is an old pre-antitamper and has the plastic not brass valve spring retaining bolt.

I get anything from 850-945 on the first shot but the next 5 shots are between 940-930fps. I don’t care to workout why it’s just as easy to let one off.

I do these shots at home cos I ain’t gonna give my targets a warning 😯

happy hunting 😆

thanks Jeff

I don’t understand what you are asking?

sorry i was not very clear. i get the heavy pellets along at 730fps so if you get the same speed i could expect something like 815 fps from the lighter pellet.

thanks Jeff

Instead of chopping the insides out of my co2 adapter I thought there must be another way of increasing the internal volume without risking blowing up the aide of my face and the is so I did that.

With a dremil I cut off the top of the valve seal, the bit that has the head on it so you can tighten or loosen it. Now that should…Read more

i can adjust mine from less then 9fpe right up to 40fpe with a 24inch barel just by truning the tophat

Be careful…..once you start to treat them nice, they begin to think they have that coming all the time!

never have I read something so true.

Damn good way to save over the £380.00 unit available in the UK

I will pay a little extra if you out it all together for me;0)

I have the 48 (0.800L) tank with a wokbutt attached and it is perfect.

My fps vary from 778 – 788 and I am shooting 21.4g bis mags.

My reg is about 6 months old and was designed for 1400psi but I shimmer it up…Read more

He normally has a few hammers in stock so it should not take long to get your hammer.

I have been using his 60 g hybrid hammer (same as above but lighter) for a year now and love it.

I found that…Read more

Thanks mamacracking for the extra bit.

It’s well worth the mod or get a blodnob valve…

once empty you will need to remove the valve from the bottle. they are normally locktited on so lots of hot water over the valve where it meets the bottle…Read more

if you have not got the valve o-ring mod it is worth it. there are people on this site that might be able to do it for you or get in contact with http://www.leupyscustomshop.co.uk/index.htm he is not cheap but does the o-ring mod for the valve.

it does sound like air is leaking up the side of you valve stem. you will hear a rush of air passing by if this is the case and you wont get too many shots before the valve sticks and your bottle dumps all the air.

when a valve works well you just hear the striking noise.

is this storm new or 2nd hand

All animals = a penny.

😀

my eyes are not that good and the zoom stops at x26…

This is what i am thinking of but i need to add the head sizes to it. it is still raining here so i am not going out in a rush.

the head will be sketched or pasted to this range chart with measurements telling me the…Read more

The wind was up a bit today so could not really do much with range finding but did have a go at 70 yards. the pellets all landed at the sam height but shifted slightly from the X to the right hand side with the wind.

70 yards 9.4cm or 3.7″ below X

just kidding, hope those groups clear up for ya.

Edit. Forget that I got it all wrong it’s green I tell you, green or .22

samjack if you are you have nothing to worry about from me i just brought a 12L dive bottle so dont have the £’s to splash about at the moment