Talonairgun | bugout | Activity https://talonairgunforum.com/members/bugout/activity/ Activity feed for bugout. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 41214da9a3e4410bdd841d765a183bd5 bugout replied to the topic Talon SS with Micrometer Tank in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-with-micrometer-tank/#post-218245 Thu, 29 Jan 2015 18:04:56 -0400 I have a .22cal talon ss and just picked a micrometer tank used…
I only spent a little time with it and did some chrony just to see but this tank is awesome.

With the power wheel on 2/15 I get low/mid 400s FPS but with the power wheel at 10/15 i get low 800s FPS.

This is using 15.9 gr JSB’s and I am running a TT talon hammer with slap mod,…Read more

]]> 3c06a5e03cb7a1e590aa19f69bfc5a53 bugout replied to the topic Hammer wgt + Std Valve + 12" = useless in the forum Talon/Talon SS https://talonairgun.com/forums/topic/hammer-wgt-std-valve-12-quot-useless/#post-215719 Sun, 21 Dec 2014 21:09:22 -0400 i recommend converting your reg-flo tank to hi-flo (only run you about $40 in parts from AF – i posed the exact parts list in separate post) and then buy an adjustable top-hat from talon tunes… this way you can have power when you want it and shot count (low power) when you want it – just by changing out the top-hat insert.

have your cake and…Read more

]]> 63b00388005f537213052bf9280ff94c bugout replied to the topic Quick Change TopHat Questions in the forum Mods/Machinists https://talonairgun.com/forums/topic/quick-change-tophat-questions/#post-215427 Wed, 17 Dec 2014 01:24:26 -0400 Update…

Converted a quick detach, reg-flo to hi-flo tank.

I think I understand now the tricky tophat seating issue discussed above – I actually got a small brass hammer and lightly tap, tap, tap the tophat to have it fully seated into the delrin piece – wouldn’t push in by hand at all.

+ posted thread on bill of materials/ parts list and…Read more

]]> 9d54df33f09d3260e4d2b08fc7e8fee9 bugout replied to the topic Removing Valve on Old Style Talon Tank in the forum Mods/Machinists https://talonairgun.com/forums/topic/removing-valve-on-old-style-talon-tank/#post-215423 Wed, 17 Dec 2014 00:56:49 -0400 I was in the same boat as you recently…

Go to Pandemic’s video here: https://www.youtube.com/watch?v=-GfKFFuXOiw

Go to the 1:39 mark in the video and watch carefully – every you need to know is right there.

If you are at a loss about the 5/16″ rod you can use the SHAFT end of a 5/16″ drill bit – but make sure you use the shaft end inside the…Read more

]]> f2883c0117bfbfb1933bfaab4868d2a4 bugout replied to the topic HELP reg-flo to hi-flo tank conversion - need you!!! in the forum General Chat https://talonairgun.com/forums/topic/help-reg-flo-to-hi-flo-tank-conversion-need-you/#post-215276 Sun, 14 Dec 2014 16:49:35 -0400 Thanks Tony – they were the only ones on the site and didn’t really have labeling to state any difference… do you know of any additional site/ sources to download for future reference?

]]> 8733120a6aabaf66aba560bbaad3c351 bugout replied to the topic HELP reg-flo to hi-flo tank conversion - need you!!! in the forum General Chat https://talonairgun.com/forums/topic/help-reg-flo-to-hi-flo-tank-conversion-need-you/#post-215188 Fri, 12 Dec 2014 20:23:14 -0400 ok… think the problem was that the tophat was not fully seated in the valve seat aka ‘the delrin seat’.

for the newbs out there (like me) you really need that tophat stem fully seated in there, like a sleeve.

FYI – i also spoke with AF customer service and they told me that basically those ‘missing parts’ are not missing, they aren’t in the…Read more

]]> 9740979d1c21d0dcb407635bb0de5d3c bugout replied to the topic Spontaneous firing in talon in the forum Talon/Talon SS https://talonairgun.com/forums/topic/spontaneous-firing-in-talon/#post-214887 Mon, 08 Dec 2014 01:58:36 -0400 just replying to save this discussion in my posts for future reference… great info.

]]> 6f2982bb9c0ef356291384d867a71b3f bugout replied to the topic muzzle brake for the Talon SS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/muzzle-brake-for-the-talon-ss/#post-214883 Mon, 08 Dec 2014 01:53:19 -0400 the talon tunes LDC is excellent, i can recommend the 9″ as i have that one and it makes the talon ss very backyard friendly… if you want to experiment first, i recommend making one from the pool supplies/ description by a guy on youtube named Critter Gitter Airguns – you can find it at https://www.youtube.com/watch?v=RSKyFgkIEDg

]]> c69a73f706c6c7d0e21a4e4eefd2b347 bugout replied to the topic Quick Change TopHat Questions in the forum Mods/Machinists https://talonairgun.com/forums/topic/quick-change-tophat-questions/#post-214875 Sun, 07 Dec 2014 22:41:42 -0400 dougroundup-

you state “I WOULD ADVISE AGAINST REMOVING AND REINSTALLING A STEM ON AN EMPTY TANK.”

just wanted to get your take then on something i am about to do… i am planning to install the TT adjustable top-hat into a tank but this tank is current normal-flo (not hi-flo); so i bought the OEM parts from AF directly to convert the normal-flo…Read more

]]> 537614f03b06ce1b84e8009352352926 bugout replied to the topic TT 6" or 9" shroud for condor SS in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/tt-6-quot-or-9-quot-shroud-for-condor-ss/#post-214845 Sun, 07 Dec 2014 15:29:23 -0400 I went with the 9″TT shroud and I am very pleased…. but wound up with talon ss not condor ss. Installed with home-made sound dampening springs/ washers/ scotchbrite in ss chamber and is even more effective

]]> f3b8b331f7fcee3d55d721d877bf3d50 bugout replied to the topic New Condor SS build - thoughts? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/new-condor-ss-build-thoughts/#post-214825 Sun, 07 Dec 2014 01:55:51 -0400 update on this post-

yeah i went to the talon ss instead… picked up a used one for decent price – moving in the talondor direction with hi-flo tank and TT adjustable top-hat and TT condor hammer w/ slap-mod – this should give me that scalability i am looking for… and a 9″ TT shroud tops it all off for the quiet factor.

]]> c3f8cd648ed661ebe1a921d2754cfa3c bugout replied to the topic Frame Venting in the forum Quick Reference https://talonairgun.com/forums/topic/frame-venting/#post-214817 Sat, 06 Dec 2014 22:56:49 -0400 thanks GKU!!!!!

]]> badd01c052d9ec0da6f3c06e69cbc7b1 bugout replied to the topic Need Advice: Convert Talon SS to Talondor in the forum Talon/Talon SS https://talonairgun.com/forums/topic/need-advice-convert-talon-ss-to-talondor/page/2/#post-214816 Sat, 06 Dec 2014 22:56:10 -0400 dwalk29 –
i saw that thread that you linked to about your issue but noticed there was not follow up as to what fixed it… can you advise just in case i encounter your issue? also any tips?

1- i have a plan for degassing the tank via the ‘penny’ or ‘dime’ method with the fill adaptor.
2- i saw that i need a vice, 5/8″ rod, and possibly a torch…Read more

]]> 794a10c6aab1fa9822f9187909d40ce5 bugout replied to the topic Frame Venting in the forum Quick Reference https://talonairgun.com/forums/topic/frame-venting/#post-214725 Thu, 04 Dec 2014 20:39:27 -0400 anyone have links to the pics on this thread? the ones here are no longer showing…

]]> f6c5565aaf9595f052f404ecefbec791 bugout replied to the topic Need Advice: Convert Talon SS to Talondor in the forum Talon/Talon SS https://talonairgun.com/forums/topic/need-advice-convert-talon-ss-to-talondor/page/2/#post-214532 Sun, 30 Nov 2014 22:10:56 -0400 thanks for the response… good point about risking a leak, etc.

]]> db521ed8a9debd4443d9d6becb3995f9 bugout replied to the topic Need Advice: Convert Talon SS to Talondor in the forum Talon/Talon SS https://talonairgun.com/forums/topic/need-advice-convert-talon-ss-to-talondor/page/2/#post-214509 Sun, 30 Nov 2014 03:31:49 -0400 sorry to reopen an older thread…

i have a .22cal talon ss and also bought a TT condor hammer with slap-mod & adjustable top-hat.

Tony from TT said I need the hi-flo tank to run that set-up in my talon ss but I dont think I want to buy a new tank for that…

how do I convert my stock (non-spin loc) talon tank (regular flo) to a hi-flo?

i…Read more

]]> c870a2cbfb731677b9c9b0a846d07a6b bugout replied to the topic New Condor SS build - thoughts? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/new-condor-ss-build-thoughts/#post-213838 Tue, 18 Nov 2014 15:16:40 -0400 thanks for the advice… will keep it fun and frosty.

]]>