Talonairgun | caboose212 | Activity https://talonairgunforum.com/members/caboose212/activity/ Activity feed for caboose212. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 331333271cbe43c9f3912b129b8fd62d caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536543 Sat, 01 May 2021 02:17:23 -0400 STILL holding air!! I’m ecstatic! I’ve still got to get my casting station set up. I need to make a mount for my thermocouple (that goes to the PID) before I REALLY sit down and set up my casting station. Adulting’s keeps getting in the way.

]]> c2efbe301647e64a8371e617560b7751 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536537 Tue, 27 Apr 2021 18:10:41 -0400 Okay! She’s all done! The pic was taken before the gauge swap, but I’ve installed the new Wika gauge on the side, and the Sekhmet digital gauge for the regulated air. Currently the reg is set for 135 bar. I’ve got to set up my casting station, and will be casting slugs soon. I’ll keep y’all posted! Once I get a good amount of slugs cast,…Read more

]]> e0d7ffd0f97b004f9d87af214b8f89ae caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536528 Thu, 22 Apr 2021 22:46:12 -0400 Still holding air… Nice!

]]> 47e03976d469e8639d0d0d1937e76f40 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536526 Thu, 22 Apr 2021 04:24:13 -0400 She’s reassembled, and filled. Currently keeping an eye on the gauges looking to see if she holds air. So far so good. I found a adjustable butt-plate on fleabay. Price was right, so gave it a try. It’s 3D printed. I like it! It feels solid, and it’s comfortable so far. Time will tell. My Aluma-Hyde 2 paint can took a dump part way through…Read more

]]> 99d97b129cee603c2f0b3a593d6e6f52 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536494 Wed, 14 Apr 2021 00:50:44 -0400 Color Scheme:

Tan:
– Scope rail
– Trigger guard
– Fill nipple cover
– Bolt handle
– Front barrel support
– Top rail
– Both rear side plates
– Adjustable cheek piece (not the actual cheek piece though)
– Barrel shroud *when it comes in*

O.D. Green:
– Trigger blade
– CF tank
– Power plenum
– Rear receiver block
– Scope rings *once I…Read more

]]> ba407593247d00af1ac8ff1e08d2d043 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536493 Wed, 14 Apr 2021 00:17:10 -0400 New shroud is in the mail, on the way to me. Here’s a sneak peek:

View post on imgur.com

Did some more painting too:

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

Slowly getting the goodies installed… I’ve got the mold for the new slug design in,…Read more

]]> 194abdea92699159e59e3c031077e5af caboose212 replied to the topic Upgrading Condor .22 to .30 in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/upgrading-condor-22-to-30/#post-536478 Sun, 04 Apr 2021 14:48:38 -0400 I believe Talon Tunes has a .30 drop in kit for sale. But basically you’re going to need at a minium:

Barrel
Bushings
Top hat
breech

I’d also add a heavier hammer and heavy spring. Again, both of those are available from Talon Tunes.

]]> 17a243a0f65ce48848d3fe10f7c89530 caboose212 replied to the topic Remove condor valve from out of date tank in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/remove-condor-valve-from-out-of-date-tank/#post-536477 Sun, 04 Apr 2021 14:39:39 -0400 You can find the tool on Ebay, just search “Airforce valve tool”. Should pop up.

]]> 01448f1cc278bdbae1735299e73b787d caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536472 Thu, 01 Apr 2021 23:38:15 -0400 I’ve got Mr. Clague to build me a custom barrel shroud for my Impact. Made from CF to keep weight down. Here’s some examples of NC’s work… These are not my parts. Just posting to give an idea of what I’ll be getting.

View post on imgur.com

View post on imgur.com

]]> 71c7f3e31830b6e06ccdde9be8c5110d caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536469 Wed, 31 Mar 2021 01:11:52 -0400 Small update. Barrel is done:

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

The outer barrel shroud is just on there for mock up. I’m going to extend the outer shroud, I’m just waiting on some aluminum to make the parts to extend it. After paint, it’ll look…Read more

]]> d318e6c0c664bee603c4e60a84bb8048 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/page/2/#post-536432 Wed, 17 Mar 2021 13:15:11 -0400 No joy on the freezer experiment. Barrel’s still too big for the CF sleeve. I’ll have to go with my original plan, which is to carefully sand the I.D. to clear the liner… No biggie. Just tedious.

Other’s in the community designed the 1-26 twist rate for .30 many years ago. Made by TJ’s, out in KY. Works quite well for both pellets and…Read more

]]> ecf1d5a5e35eaf6364c16817bd88e648 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536430 Wed, 17 Mar 2021 03:20:00 -0400 That is an idea… I may try that! I’d still epoxy the ends in place though…

Yes, the liner is an FX factory liner. 1-26 twist.

]]> 58b11af26abd1ef496a6fe7f1eefb558 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536428 Tue, 16 Mar 2021 12:38:16 -0400 The new CF barrel sleeve is 14mm O.D., which is the same as a factory sleeve. The I.D. is 10mm. I’m going to have to slightly open up the I.D. so the FX liner will fit. The FX liner is 10mm O.D. The JB Weld will spread on pretty uniformly, since the tolerance will be pretty tight. Epoxy will be spread on both the liner and inside the sleeve…Read more

]]> f5bd583194e40a1bb3341ab5328e3bce caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536421 Sun, 14 Mar 2021 15:09:02 -0400 I haven’t been able to get a hold of TJ’s, either by phone or email. I hope all is well with the family, considering what-all is going on in the world…

I found a .30 700mm FX liner. I’m going to sleeve the liner in a 14mm O.D. CF tube. The tube is 10mm I.D., so I’m going to have to slightly open it up, to have room for the liner. There’s…Read more

]]> 8469c2c96284b311a0e92c9c71c0507f caboose212 replied to the topic 6mm Talondor in the forum General Chat https://talonairgun.com/forums/topic/6mm-talondor/#post-536388 Mon, 22 Feb 2021 23:54:48 -0400 I forgot to mention- the reason for the TT tank adapter, is that based on my measurements, and confirmed this evening, the TTTA puts the larger 62 cu in tank in the same spot as a factory tank- at least with regard to LOP and where my cheek will sit. I’ll definitely need the larger tank, since a 20″ barrel won’t be all that efficient.

]]> 2cea85b744d243bc8871f3822b236920 caboose212 started the topic 6mm Talondor in the forum General Chat https://talonairgun.com/forums/topic/6mm-talondor/ Mon, 22 Feb 2021 23:49:37 -0400 I’ve got a “Bowman” 6mm slug mold, and I’m assembling a 6mm gun using a Talon frame, an older condor valve, 62 cu in tank Modified for M18 threads by Doug Noble, and a hammer and tank adapter from Talon Tunes. Barrel is only 20″ long though. I’ll update here once I get the barrel and bushings machined up. I plan on running an LDC made by Neil…Read more

]]> e530a994816375491e674f984eec67fa caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536383 Sun, 21 Feb 2021 13:01:41 -0400 The 500cc bottle has been installed, and all the small parts are in:

HuMa probe, dual TP, Extra High Pressure reg
FX Slug Power Kit
Saber Tactical adjustable cheek piece and Gen2 Arca Swiss rail
Ergo Zero Angle grip

Now all that’s left is the barrel, and I’ll be ordering the blank on the 1st. So the barrel should be done mid-March or…Read more

]]> dd56b739a5c3446dcf2db1ff813a29d7 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536379 Tue, 16 Feb 2021 23:04:50 -0400 Temporarily reassembled. HuMa Gen3 Extra High Pressure reg ordered, along with the Slug Power Kit.

View post on imgur.com

]]> 1661cb8ef33dff72254a9260dbbe79f2 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536376 Tue, 16 Feb 2021 00:17:20 -0400 I’ve ordered a 30-062M mold from Accurate. Here’s a pic:

View post on imgur.com

It’s a re-worked version of the NOE .30 BBT. This is a flat nose because Accurate doesn’t do hollow points. I’ll have to send this mold off to Erik to have that done. These should drop from the mold around 62 grains. Once HP’d, they might be around 56…Read more

]]> 921cb6bc56ebcfd93b58d3c1120c84c8 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536375 Mon, 15 Feb 2021 18:54:40 -0400 I really don’t like that picture format. Oh well, not a big deal I suppose. At least I can post pictures. Anyhoo, I got the Ergo Zero Angle Grip this morning and put it on the Impact. I then took it apart a little bit to get some of the parts painted up. The paint is Aluma-Hyde 2 Desert Tan. It’s a good compromise between standard rattle-can…Read more

]]> fc29401eb714cd3701e6a3c83360c077 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536374 Mon, 15 Feb 2021 18:50:10 -0400 Okay, not sure where the rest of the post went… Maybe this will work?

View post on imgur.com

View post on imgur.com

View post on imgur.com

View post on imgur.com

]]> 5f9d34548f78e89db54cd486cd169a25 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536373 Mon, 15 Feb 2021 18:41:09 -0400 picture test:

View post on imgur.com

]]> e451776c9c9b02dabd77be80ac6e0805 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536371 Mon, 15 Feb 2021 05:03:01 -0400 I got the 1/8″ adjustable pin wrench earlier than expected. I swapped the 500cc 4500 psi bottle onto the Impact. The Ebay bottles have a shorter neck than the FX bottles- I was worried about clearances. I’ve got plenty of room between the bottle and the valve spring adjuster. I’ve also got A LOT of clearance near the receiver, due to the Saber…Read more

]]> 351870e5efb1a6770b8ef779d8f316d3 caboose212 replied to the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/#post-536369 Fri, 12 Feb 2021 04:15:55 -0400 New .30 mold is in the Accurate catalog. It’s a flat nose (can be hollow pointed), .375 OAL, flat bottom. Mold number 30-062M. Should drop slugs around 62 gr. before HP. It’s a re-hash of the 68 gr. .30 Bob’s Boat Tail slug. We dropped the BT, and lengthened it back out to .375″ so it shouldn’t have any issues loading in any magazines.

I…Read more

]]> 39d9e004f656e7750fbaa7b9c0ef9f35 caboose212 started the topic New Impact Mk2 Build in the forum FX Air Rifles https://talonairgun.com/forums/topic/new-impact-mk2-build/ Thu, 11 Feb 2021 01:21:22 -0400 So I finally broke down and got an Impact. It just checked off a LOT of boxes for me. The Mk2 with power plenum is about the best version so far, so I finally caved and got one. I got a .30 Compact. I’m going to set this rifle up for cast slugs. Here’s the plan:

500cc tank (using a CF 4500 psi tank)
28″ OAL TJ 1-26 barrel
HuMa dual TP
HuMa…Read more

]]> 780a582aaefedb132d23a761d7be1ca3 caboose212 replied to the topic EDIT: .357 Pellet Slinger in the forum Benjamin Marauder https://talonairgun.com/forums/topic/edit-357-pellet-slinger/page/3/#post-536365 Thu, 11 Feb 2021 00:29:59 -0400 I got it completed, and it was shooting 130 fpe with pellets… Then the bolt broke. I got a new bolt made and got it back together, and enjoyed it for a little bit. Then I got tired of how long it was. I’ve still got the parts for it. I’ve been meaning to put it back together as a carbine… She was a real sweet shooter.

]]> 15066ee1478fe22744a76ce8a9e00fa2 caboose212 started the topic WTB Condor frame in the forum General Airguns For Sale https://talonairgun.com/forums/topic/wtb-condor-frame/ Sun, 20 Dec 2020 21:31:06 -0400 I just need a Condor frame with trigger/safety components. PM with what you’ve got. Not looking for a whole gun. Condor/TalonSS/EscapeSS are all the same thing. TIA!

]]> 0535f89ccf93374d0cb2115b63fbc010 caboose212 started the topic 6mm Texan, thoughts? in the forum Texan https://talonairgun.com/forums/topic/6mm-texan-thoughts/ Tue, 20 Oct 2020 01:32:26 -0400 I’ve been kicking around the idea of a 6mm Texan- slugs will be around 62 grains. On the lowest possible setting, y’all think this will be too light for a .257/.308 valve?

]]> fa21e49cbe5b1f2307cd5682bf2f6122 caboose212 replied to the topic SILENT TALON P in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/silent-talon-p/#post-534399 Sat, 16 May 2020 11:36:03 -0400 Yeah, back in the good old days, before everyone was in a constant state of offense!

]]> 84888609460d1dee1d4d0007904bf53d caboose212 replied to the topic Weird find in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/weird-find/#post-463203 Sun, 01 Sep 2019 00:03:53 -0400 Oh yeah, it’s really pricey. I just wanted to post it in case someone was looking for something like that- maybe like for a long range Texan build that the person didn’t want to use a benchrest stock.

]]> 7260ac04c42dcfe0b2642e1aec491cd6 caboose212 replied to the topic Weird find in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/weird-find/#post-462377 Sat, 31 Aug 2019 17:06:57 -0400 Here’s a pic w/o the tank:

stock

]]> a339aa48cae3b0c7633c96f95c263d90 caboose212 replied to the topic Weird find in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/weird-find/#post-462376 Sat, 31 Aug 2019 17:05:02 -0400 This just for the stock- that tank is whatever you’re running on your gun- 13 cu in, 17 cu in, 22 cu in. So if you have a spin-loc valve, you don’t have to take the stock off to fill… This stock just slips over and secures to the tank.

]]> e3db5accb77d19191e2f248175aa4040 caboose212 replied to the topic Nothing Special Here in the forum BullPup General Chat https://talonairgun.com/forums/topic/nothing-special-here/#post-277246 Thu, 13 Jun 2019 04:10:15 -0400 I ran into a few issues and got frustrated with the build, so I took a break from it. I’m fixin’ to get my lathe up and running, and I still need to tram my mill. But once those are done, I can finally get back to this build. I’ll need to get a new main tube, I drilled the TP hole a bit off, so it’s not seating properly. Not a big deal. I’m…Read more

]]> 04809ecebfadc6b79eba67d3bedbf920 caboose212 replied to the topic Long Term Project: Rapid Mk2 in the forum Other Guns https://talonairgun.com/forums/topic/long-term-project-rapid-mk2/#post-277244 Thu, 13 Jun 2019 04:01:41 -0400 Changed the stock build a bit. Decided to use an airsoft stock… Here’s some pics:

Basically, I gutted the stock where I needed to, and reinforced the halves with resin. I filled the butt with XPS foam and expanding foam. I secured the two halves together with epoxy around the edges, Gorilla Glue on the foam, and PC-7 epoxy…Read more

]]> 5baa88c2e74ac22270fa21a768e15626 caboose212 replied to the topic EDIT: .357 Pellet Slinger in the forum Benjamin Marauder https://talonairgun.com/forums/topic/edit-357-pellet-slinger/page/2/#post-277243 Thu, 13 Jun 2019 03:49:32 -0400 More updates:

For the most part, the rifle is done. The reg setting was right on, and the rifle is shooting at 130 fpe w/pellets, as intended. I updated the stock again, this time to a RAI chassis. I added a Law Tactical folding adapter clone to it. I have installed a cheapie trigger guard, and removed the raised cheek piece. I’ve also…Read more

]]> 551ad8de7ab0f556b7831bacee083092 caboose212 replied to the topic TalonP vs Condor valves in the forum General Chat https://talonairgun.com/forums/topic/talonp-vs-condor-valves/#post-277227 Mon, 03 Jun 2019 02:48:10 -0400 See, that’s what I thought- the top hat seems to be sticking out about double what it’s supposed to be… But why though? Everything is the same… 😐

]]> 82a7b48d32fec0850f87413ba7d1cf6d caboose212 replied to the topic SILENT TALON P in the forum TalonP (Pistol) https://talonairgun.com/forums/topic/silent-talon-p/#post-277167 Thu, 09 May 2019 01:00:00 -0400 My TalonP was set up for 40 fpe, and I was using a DonnyFl adapter and Ronin. Perfect combination. I was set back from my window a few feet, and none was the wiser. The pellet hitting the target (usually a pest animal) was louder than the report of the airgun. YMMV

]]> 091997a6830619b3f2193045fe25d0ff caboose212 replied to the topic Long Term Project: Rapid Mk2 in the forum Other Guns https://talonairgun.com/forums/topic/long-term-project-rapid-mk2/#post-277049 Wed, 13 Mar 2019 17:36:52 -0400 Got some more stock work done. The shaping is finished. I AM going to be skinning this in CF, as I found a kit that’s reasonably priced and is here in the States:

http://www.gorillacarbons.com/index.php?route=product/product&product_id=51

I need to contact RAW again, as I’m still waiting on them to let me know what size screws I need… I…Read more

]]> 61a6408ae93ca846e3e1eb210657b865 caboose212 replied to the topic Long Term Project: Rapid Mk2 in the forum Other Guns https://talonairgun.com/forums/topic/long-term-project-rapid-mk2/#post-277048 Wed, 13 Mar 2019 02:24:57 -0400 Little bit more stock work:

]]> 377acb485de4bd32e3d5c0b6e70e5c6f caboose212 replied to the topic Nothing Special Here in the forum BullPup General Chat https://talonairgun.com/forums/topic/nothing-special-here/#post-277001 Fri, 01 Mar 2019 22:42:28 -0400 I finally got my metal air stripper a few weeks back… I didn’t get too far with assembly, since I forgot to order the goddamn valve screws… Awesome. Anyhoo, here’s some pictures.

I assembled the main tube as far as I could go with no valve screws. I’ll keep y’all posted.

]]> 34fd2391c7cbad3e7a8fdc9e5455aa43 caboose212 replied to the topic Long Term Project: Rapid Mk2 in the forum Other Guns https://talonairgun.com/forums/topic/long-term-project-rapid-mk2/#post-276997 Thu, 28 Feb 2019 23:45:23 -0400 Little more progress on the stock. I started laying out shapes and such…

The bottom of the butt-plate is a good mistake- it’ll help the back ride a rear bag better… I’ll update when I have more work done.

]]> b5621b914d08e4a900a094312facc430 caboose212 replied to the topic Long Term Project: Rapid Mk2 in the forum Other Guns https://talonairgun.com/forums/topic/long-term-project-rapid-mk2/#post-276988 Wed, 27 Feb 2019 22:00:31 -0400 Made a little more progress on the stock:

Once the trigger area piece dries, I can fill in the rest of the stock with foam… I’ll keep y’all posted.

]]> 238041cccfac7771c641be5456ad4ffc caboose212 replied to the topic .25 Crosman SOMETHING in the forum Other Guns https://talonairgun.com/forums/topic/25-crosman-something/page/3/#post-276987 Wed, 27 Feb 2019 21:57:03 -0400 Did some more work on the filler plug… I bedded the plug to the chassis/receiver group but since the plug is made of foam I kinda snapped it… But luckily it was a clean break. I was able to glue it back together no problem…

After pulling it from the chassis/receiver, waiting for the repair to dry:

After the repair is dry, and did…Read more

]]> 7f28aa748c54c93bbc44f26caf1a2879 caboose212 replied to the topic .25 Crosman SOMETHING in the forum Other Guns https://talonairgun.com/forums/topic/25-crosman-something/page/3/#post-276970 Sun, 24 Feb 2019 13:17:56 -0400 I’m working on a filler piece to take up the open space between the Armada chassis/tube/block and the EBR hand guard. The plan is to make the filler piece out of XPS foam, then make a mold after final fitting/shaping. The reason for the filler piece is two-fold: obviously it fills in the existing gap and gives the EBR hand guard something to…Read more

]]> 3853aeae199cac72e4af5429a26daca1 caboose212 replied to the topic .25 Crosman SOMETHING in the forum Other Guns https://talonairgun.com/forums/topic/25-crosman-something/page/3/#post-276963 Fri, 22 Feb 2019 19:47:31 -0400 Okay- a small update…

I threw some parts together real quick so I (and you) could get a better idea of how this is gonna look:

The new main tube, with conversion block and tank is only 4.5″ shorter than a factory tube… Not as short as I’d like- but I’ll take it. Bear in mind, the barrel will be right at the end of the tank, and the stock…Read more

]]> ee8698e3d354d8a532522001cebd5414 caboose212 replied to the topic EDIT: .357 Pellet Slinger in the forum Benjamin Marauder https://talonairgun.com/forums/topic/edit-357-pellet-slinger/page/2/#post-276962 Fri, 22 Feb 2019 19:25:23 -0400 Wow, time flies… Jeeze.

Okay- well, some updates:

I fixed all the leaks, and with those shims from McMaster Carr, It looks like I’m getting an output of over 2100 psi, but under 2200 psi. Right where I want to be. I still need to air up and shoot some strings over a chrony and do final tune. Oh- and that Armada stock did NOT work out…Read more

]]> b3a1c77b757f9c4c951735862bb0afb5 caboose212 replied to the topic .25 Crosman SOMETHING in the forum Other Guns https://talonairgun.com/forums/topic/25-crosman-something/page/3/#post-276891 Sun, 27 Jan 2019 17:07:25 -0400 I got some more parts in:

RAI main tube, conversion block and bottle adapter
Hill PEEK striker
KAK Shockwave buttpad
DonnyFL LDC adapter end cap

Anyhoo, I had enough parts to throw it together to grab some preliminary measurements.

Main tube to end of bottle is 19.5″. It’s a reduction of 4.5″, compared to a factory Gen2 Mrod tube.

I was…Read more

]]> 2f726215b76d8721cefcdf3c1752d5ae caboose212 replied to the topic .25 Crosman SOMETHING in the forum Other Guns https://talonairgun.com/forums/topic/25-crosman-something/page/3/#post-276884 Sat, 26 Jan 2019 04:20:11 -0400 After much debate (with myself), conversing with multiple people on various forums and FB, I’ve decided to change up the build completely. Here’s the new run down of parts:

.25 cal Benjamin Armada breech
Armada chassis
11.75″ main tube
Bottle conversion block
Bottle adapter
TSS rear plug
MDS hammer w/PEEK striker
13 cu in tank
Clone LAW Tactical…Read more

]]> 9911ce7c880faf7663ab413a08932fd1 caboose212 replied to the topic .25 Crosman SOMETHING in the forum Other Guns https://talonairgun.com/forums/topic/25-crosman-something/page/3/#post-276837 Sat, 05 Jan 2019 19:13:38 -0400 It’s been a while, I know. Life gets in the way of all the fun shit! Plus, admittedly, other airgun projects! :rofl: …And vehicles… And PB’s… And house projects… And…

After thinking on it for a while, and talking to some other tuners, I’m going to go with a Cothran breech, set up for a .5″ O.D. barrel. I’m also going to use a TJ…Read more

]]> c93774e877cad138d1e3a644bc085827 caboose212 replied to the topic Nothing Special Here in the forum BullPup General Chat https://talonairgun.com/forums/topic/nothing-special-here/#post-276835 Sat, 05 Jan 2019 18:42:46 -0400 I got my breech, barrel and valve a few days ago… Looks even better in real life!! I’m still gathering small parts, but I’ll be assembling soon!!

I’ve ordered my metal air stripper for this build as well.

I’ve been talking on other forums, as this build with this parts combination:

Cothran valve
24″ barrel
HuMa reg set at 160 bar (not…Read more

]]>