Talonairgun | camilof | Activity https://talonairgunforum.com/members/camilof/activity/ Activity feed for camilof. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 324e248252616fb3a623fe20b5f0f004 camilof replied to the topic How to reduce hammer spring force? in the forum Mods/Machinists https://talonairgun.com/forums/topic/how-to-reduce-hammer-spring-force/#post-234176 Tue, 18 Aug 2015 01:34:22 -0400 quote amjadck:Rifle is Evanix Rainstorm in 177. It’s regulated @ 120 bar. Big transfer port was reducing the shot counts and increasing fps. The only easy way I fig is to reduce the Hst.
Let me know if there are better ways. Will try them too.
Now the issue facing is hammer bounce which is reducing efficiency a bit.

Sent from my iPad using…Read more

]]> d8b1d4c55acc5dc2ee5bb414c9d177fb camilof replied to the topic Meet the Taipan Mutant....(updated) in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/meet-the-taipan-mutant-updated/#post-220311 Fri, 27 Feb 2015 07:37:06 -0400 Please i want know more about this gun
Price. Accuraccy, Stringshot… everything that you can tell about this air rifle
thnaks

]]> beb0d5bbf8a7ad9a43940b01513a7447 camilof replied to the topic FX bobcat Issues in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-bobcat-issues/#post-212116 Fri, 17 Oct 2014 13:52:43 -0400 quote Hoot:If that is a round gauge, no hex sides, with 3K psi pushing against it, you may have to dry fire it until the gauge can rotate. Or..if you can get to the hammer, press on it with a tool and allow the air to escape that way.

Hoot:

First i have to allow the air scape, when was empty unscrew it i changed the seal, and put purple…Read more

]]> 56d8f43d58ab9e619e1bf5334e9003dd camilof replied to the topic Hunting Andean Partridges at 11.500 feet in the forum Other BullPups https://talonairgun.com/forums/topic/hunting-andean-partridges-at-11-500-feet/#post-211172 Tue, 23 Sep 2014 21:25:28 -0400 Deberia intar usar un riel para dejar la camara-mira bien adelante y poder encarar. seria muy intersante un video asi,

]]> 0e6e1ecc18f40e5b174caf4e1c745a80 camilof replied to the topic FX bobcat Issues in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-bobcat-issues/#post-211169 Tue, 23 Sep 2014 21:15:54 -0400 quote camilof:quote Hoot:Dang!!! Camel-Loaf,

if it wasn’t for bad luck, you wouldn’t have any luck at all.

Can you tell us where the leaking air is showing up? The breech, the barrel, from within the stock???? That tells us a lot.

Take the stock off. Stick the whole dang gun in the bath tub in cool water and pin point the leak site with…Read more

]]> ef2839f4151fe66f4ffe1e9d24287277 camilof replied to the topic FX bobcat Issues in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-bobcat-issues/#post-211168 Tue, 23 Sep 2014 21:14:52 -0400 quote Hoot:Dang!!! Camel-Loaf,

if it wasn’t for bad luck, you wouldn’t have any luck at all.

Can you tell us where the leaking air is showing up? The breech, the barrel, from within the stock???? That tells us a lot.

Take the stock off. Stick the whole dang gun in the bath tub in cool water and pin point the leak site with the bubbles.…Read more

]]> bbff58b4227358002d8489223c87326e camilof replied to the topic FX bobcat Issues in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-bobcat-issues/#post-211122 Mon, 22 Sep 2014 22:09:13 -0400 quote Reaper0d:watched the video, to be honest it almost looks as if the bubbles i seen were the air escaping from the gauge itself. have you left it in the water like that for several more seconds then in the video? those bubbles could be just air escaping the gauge housing. i dont see them originating from the threads as one would think,

it…Read more

]]> a62d27731653a6e011ad349248de848f camilof replied to the topic regulator for condor in the forum Mods/Machinists https://talonairgun.com/forums/topic/regulator-for-condor/#post-209197 Wed, 20 Aug 2014 20:54:36 -0400 quote Toad Monster:I was personally told by jdsairman through email that I would need the co2 adapter to use his regulators with my condor. He also advised me to select 2000 psi when ordering for around 900 to 950 fps in .22. I will be buying his regulator soon, and plan to give a full report.

I love the accuracy of my condor ss but hate the…Read more

]]> 51f780761d69839f6dfb8643c1d26b52 camilof replied to the topic regulator for condor in the forum Mods/Machinists https://talonairgun.com/forums/topic/regulator-for-condor/#post-209128 Tue, 19 Aug 2014 20:53:02 -0400 quote mphunts:I want to use a regulator & 4500 psi bottle on a ccondo. I was thinking of using a jdsairman regulator but cant figure out how to connect it to my valve since the e-tac seems to no longer be available. the e-tac reg & adapter would add 3 1/2″ to lop if it was still available so would need a 10 to 10 1/2″ bottle to keep it close to…Read more

]]> 31d506dc090e77abd9953d5946cf88f4 camilof replied to the topic Raptor Pneumatics EZ-Fill 4500 in the forum BullPup General Chat https://talonairgun.com/forums/topic/raptor-pneumatics-ez-fill-4500/page/2/#post-206092 Wed, 09 Jul 2014 13:27:19 -0400 Please tell us, about the performace of raptor – Omega – alpha 90 Compressor..
work Hours? what about maintenance?
And more information that help us and bring us more information about quality and if worth to buy it.

thanks a lot

]]> 398376aecae8c2196e45f0f491a4717c camilof replied to the topic Compressor in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/compressor-d5/#post-206090 Wed, 09 Jul 2014 13:19:03 -0400 Please the peopleb htat have some weeks with alpha90 compressor or Omega compressor, tell us about opinion until now.

]]> e7bcd0cd3b76d10e701fefa91de1e196 camilof replied to the topic Cricket tune questions in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-tune-questions/#post-200788 Wed, 02 Apr 2014 21:32:16 -0400 an important issue is the hammer spring tension, the spring must to have some tension, too loose down consistency
then tried to give some tension, turn CW half turn, an try again

]]> 63635a952bfb5c9363405755844563da camilof replied to the topic Air Tank for Talon/condor at the right size in the forum Mods/Machinists https://talonairgun.com/forums/topic/air-tank-for-talon-condor-at-the-right-size/page/2/#post-196464 Sun, 23 Feb 2014 05:18:55 -0400 Hello
Finally, here the string
Pellet JSB 18.13 grains
1 846
2 868
3 868
4 865
5 863
6 867
7 865
8 865
9 863
10 861
11 867
12 865
13 866
14 864
15 863
16 861
17 865
18 868
19 858
20 865
21 865
22 865
23 865
24 867
25 865
26 861
27 857

Finally i`m happy, i have a very accuracy, lightweight and whisper airgun, I like this consistency ‘ and…Read more

]]> 86d851427d75f5f3f92f96b736b20734 camilof replied to the topic Air Tank for Talon/condor at the right size in the forum Mods/Machinists https://talonairgun.com/forums/topic/air-tank-for-talon-condor-at-the-right-size/page/2/#post-196062 Thu, 20 Feb 2014 02:13:42 -0400 look the lenght, finally is not to long for me
Tthe 17 ci tank give me 30 shots, between 850 – 870 fps

I hope to make a video of string shoot

]]> f84926e68600081f3fa6b45eaa4dd2e0 camilof replied to the topic Air Tank for Talon/condor at the right size in the forum Mods/Machinists https://talonairgun.com/forums/topic/air-tank-for-talon-condor-at-the-right-size/#post-195971 Wed, 19 Feb 2014 15:57:49 -0400 quote Mrnewbie:Camilof, I hope you realize that when you slap a reg’ed paintball tank on to your gun that you are killing your power!

All those paintball tanks ..are set to around 850psi..output. The AF tank is a direct 3000psi.

Now if all you need or want is shorter gun with low power, then thats just fine and it will shoot just like you are…Read more

]]> 51078ccdf84b63ff4c6b201c89b6ce5f camilof replied to the topic Air Tank for Talon/condor at the right size in the forum Mods/Machinists https://talonairgun.com/forums/topic/air-tank-for-talon-condor-at-the-right-size/#post-195848 Tue, 18 Feb 2014 14:09:11 -0400 Finally i bought 3 tanks:
13 ci tank (210 cc)
17 ci Tank ( 275cc)
22 Ci Tank (355 cc)

the 22 ci tank i believe that is very long, it has almost the same lenght of the AF tank,but you must put the co2 adapter. On the other hand the 13 ci is very short-
The 17 Ci tank plus co2 adapter is a bit long than the AF tank.
Please see the Pics

the…Read more

]]> 273efee28f494593aa097ed04ec89d7f camilof replied to the topic Raptor Pneumatics EZ-Fill 4500 in the forum BullPup General Chat https://talonairgun.com/forums/topic/raptor-pneumatics-ez-fill-4500/page/2/#post-189592 Fri, 03 Jan 2014 16:03:30 -0400 quote Dr. Steele:Not sure about support yet. I shot a tire today for the first time. HOLY SHIT that was weird. I have never heard a sound like that before!!!

Shot all day is Amazing, the only different thing is that the pellets never are enough :8:

]]> f483550edb32e31377833591f0e31062 camilof replied to the topic My Regulated .25 in the forum Mods/Machinists https://talonairgun.com/forums/topic/my-regulated-25/page/2/#post-189499 Thu, 02 Jan 2014 20:19:46 -0400 Hello , Dyotat

First it looks very nice, i want to know more about valve, Tank, and regulator.

I believe that if i want long shots (more than 50 yards) i need a lot of consistency for it, then is necessary a regulator.

Do you have a complete string with this setup?

]]> fea805dc2da6a15f6ae0df7ccd2ce976 camilof replied to the topic New Baffles in the MArauder black in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/new-baffles-in-the-marauder-black/#post-189495 Thu, 02 Jan 2014 19:51:23 -0400 quote Anthony266:Thanks for the info.
How quiet is the new M-Rod?
Thanks

I feel more quiet, than older version, and i feel the older more acute.

]]> 428e5cb732e84af8114171861272802b camilof replied to the topic Sound Lock on Standar Talon 18" in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/sound-lock-on-standar-talon-18-quot/#post-189492 Thu, 02 Jan 2014 19:36:04 -0400 The results: Is a very quiet gun, and accuracy is good.

]]> 7628c9c0fcf790252d2cddfcc8bbd0f1 camilof replied to the topic Raptor Pneumatics EZ-Fill 4500 in the forum BullPup General Chat https://talonairgun.com/forums/topic/raptor-pneumatics-ez-fill-4500/page/2/#post-189462 Thu, 02 Jan 2014 15:40:34 -0400 This compressor sounds great, all in one at reasonable price.
But, The thing mos important is the support.
For example, I have 2 years ago the shoe box, and i changed the orings kit in 3 times, and other parts. And ALWAYS, always, i have support from Tom, all the days in the year (last time i sent and email in christmas day, and the same day…Read more

]]> d6fa5e115d6665cef0b436e8eabcc6e9 camilof replied to the topic Raptor Pneumatics EZ-Fill 4500 in the forum BullPup General Chat https://talonairgun.com/forums/topic/raptor-pneumatics-ez-fill-4500/#post-189250 Tue, 31 Dec 2013 17:26:29 -0400 Nice
I´m considering in buy it.
I want to know, how many time spend in fill a 88cu ft tank, from 3000 to 4500 psi.

You would consider to make a video for youtube!
thanks

]]> b8c82e0e43654560bab9da2e52287b6e camilof replied to the topic Added hammer weight? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/added-hammer-weight/#post-187309 Wed, 18 Dec 2013 16:39:07 -0400 quote dsti:Quick question:

I have a Talon SS in .22 cal… I’d plan to get the condor valve or condor hi-flow tank with the .25 barrel and hammer weight. My question is, if I decide to occasionally swap back to my .22 cal barrel and standard tank, will leaving the hammer weight in be detrimental? I imagine it should just hit the valve harder but…Read more

]]> 4a48786028673482dda13ceb1084d86e camilof replied to the topic Talon SS - Regulado. in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-regulado/#post-187308 Wed, 18 Dec 2013 16:34:33 -0400 quote ldp:k wheres the damn translate button :mrgreen:
First Apologize for write in other language, i know that the language in this forum is english, but today i found this topic in Spanish (my native language)
This post talk about the results in power and consistency after install an HPA 13ci tank (cost about 55 bucks) + Regulator with an…Read more

]]> e3e5a942d0d39bd6265db60ee214fa3c camilof replied to the topic Talon SS - Regulado. in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-regulado/#post-187291 Wed, 18 Dec 2013 13:58:50 -0400 [quote=”WALTER PACHECO”]La crono de abajo es de un Talon SS regulado , como , pues asi , tiene la valvula de Co2 , el stem es de acero inox. en una pieza , modifique los agujeros del stem ( los dos ), la camara de expansion es de acero inox. , copie la pieza de hierro que trae la valvula de CO2 y amplie la camara de expansion interna , pedi un…Read more

]]> 80054e8aeef89b33dd783bf458d1f89b camilof replied to the topic Talon String Shot with Standar Tank for .177 and 25 barrel in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-string-shot-with-standar-tank-for-177-and-25-barrel/page/2/#post-182929 Mon, 04 Nov 2013 03:45:04 -0400 Hello,
Today i tried the same standar tank with 18″ barrel, but in .22

Power Setting 10, Crosman pellet 14,3 grains
I try to compare the standar rifle with standar striker, and the standar striker PLUS striker Weight (see link)

http://www.pyramydair.com/s/a/AirForce_Striker_Weight/4038

Standar strike weight 48,5 grams + the striker weight…Read more

]]> 7cfccf24a6a85e7117d7badf80fba844 camilof replied to the topic Cricket color gauge reading in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-color-gauge-reading/#post-181763 Tue, 22 Oct 2013 14:31:24 -0400 Hello
I believe that apic, say more than a lot of words….

My Cricket in .25 has a color gauge 😳 …. sks
Two week after I bought my first cricket, i bought another in .25 an it came with scale gauge

I believe that is difficult to stablish the real pressure with the color gauge, the bet way is to have a gauge in the filling system.…Read more

]]> a1800067f3257636c16f53eb1858667f camilof replied to the topic Cricket- Hammer Spring Questions... in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-hammer-spring-questions/#post-180714 Fri, 04 Oct 2013 03:35:27 -0400 quote synopsys:When I first got my Cricket it was shooting 885-895, it was tuned at WildWest/TGAG prior to shipping.

I turned out the tension screw one half turn at the Western Regional FT Championships and tested the velocity today.

Now it’s up around 905-915.

I thought turning out the hammer spring tension knob reduced the velocity….?…Read more

]]> feb8505c0b0cd5c18f692de14c909b05 camilof replied to the topic Cricket in .25 in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-in-25/#post-179966 Tue, 17 Sep 2013 23:20:18 -0400 HEllo
My Cricket .25 give 950fps with JSB King 25,4 grains, it is a lot of Power..
I only can shoot at 55 yards, at this distance is deadly accurate..
But i want to down the power, i believe that 900 fps with Kings is enough for me, Anybody can tellme how i can adjust the power?
Thanks!

]]> 2e716951f9624465f085c752391690b6 camilof replied to the topic Talon String Shot with Standar Tank for .177 and 25 barrel in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-string-shot-with-standar-tank-for-177-and-25-barrel/#post-179187 Wed, 04 Sep 2013 18:55:30 -0400 quote mkfs:quote maw:MK, the spring in the 177 tank slightly stronger then one in 20 22 25,, we are talking about the valve spring, the reason for this is so the air is reduced to the smaller 177 chamber, for to much air or back pressure in the chamber can cause tank dump.

Does a new Talon .177 without any modification also dump on…Read more

]]> 393eaf52a4df723e08daae888351d06b camilof replied to the topic Talon String Shot with Standar Tank for .177 and 25 barrel in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-string-shot-with-standar-tank-for-177-and-25-barrel/#post-178828 Fri, 30 Aug 2013 20:43:21 -0400 quote mkfs:Hi,
Please do share what changes / upgrade was done to your talon .177 when you change the barrel to .25
Though you have not mentioned still I want to reassure myself. As I intend to do the same. And I feel 860 fps is good enough for accuracy.

mk

Hello
I only change the Barrel. and move the setting power at 10.
For my is enough…Read more

]]> bfb2c093f36bf7310255e84ee5b3a9f5 camilof replied to the topic Altaros Regulators for AAs4xx (BSA,benjamin marauder e.t.g) in the forum Other Guns https://talonairgun.com/forums/topic/altaros-regulators-for-aas4xx-bsa-benjamin-marauder-e-t-g/page/2/#post-178054 Tue, 20 Aug 2013 17:11:23 -0400 quote Naser404:I bought more than 8 of them so far and none had an issues.

mmm in what kind of Arguns?
I put it in Air Arms S510 Xtra FAC

]]> e0939b20ca42e4401882a7b6e664e43c camilof replied to the topic Altaros Regulators for AAs4xx (BSA,benjamin marauder e.t.g) in the forum Other Guns https://talonairgun.com/forums/topic/altaros-regulators-for-aas4xx-bsa-benjamin-marauder-e-t-g/page/2/#post-178047 Tue, 20 Aug 2013 14:29:08 -0400 Hello
I bought 5 altaros regulators for my Air Arms airguns
I put 3, but none work. …. I´m dissapointed with this purchase (Almost five hundreds bucks to the trash

]]> 9ebe1c5afd029dbaa56099d78e0faa8a camilof replied to the topic First shots and impressions from the .25 ss in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/first-shots-and-impressions-from-the-25-ss/#post-177927 Sun, 18 Aug 2013 16:52:58 -0400 Hello, do you have a string shot? from 3000 psi to 1800???
Anybody have it?
How many shots per charge?
thanks

]]> c756ae0f7cbf5027676ab67b7374986b camilof replied to the topic RAW Rapid Air Weapons HM1000 mini Review in the forum Other Guns https://talonairgun.com/forums/topic/raw-rapid-air-weapons-hm1000-mini-review/#post-173959 Mon, 10 Jun 2013 13:38:48 -0400 quote TonyU:camilof,

Have you had a chance to weigh your rifle? Do you shoot it exclusively from the bench or have you tried any offhand shots? I just wondered if it felt balanced. I’ve been considering one with a 500cc bottle. Thanks.

I like to shoot it off hand, the rifle feel well balanced, with a little of weight at the barrel. I can hit…Read more

]]> a71e68aca43a52bee34b6b65bfcd4a6e camilof replied to the topic Talon SS Breech "O" Ring Size in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-breech-quot-o-quot-ring-size/#post-172501 Mon, 20 May 2013 04:37:05 -0400 Im looking for this orings}
Anybody can help me? where can i bought it? Any web?
I dont live in USA, then i m looking for a web to make an oline purchase
thanks

]]> a0579ffb7c75ac56b25d63a7e64d3ab9 camilof replied to the topic RAW Rapid Air Weapons HM1000 mini Review in the forum Other Guns https://talonairgun.com/forums/topic/raw-rapid-air-weapons-hm1000-mini-review/#post-170997 Sun, 14 Apr 2013 20:02:46 -0400 Finally today i can make some shoots with 3 different pellets at 50 yards (46 metros). JSB Jumbo 15,9 grs, AA 18 grains (same JSB Jumbo Heavy) and H&N Baracuda 21 grains 5.51

Rifle. HM1000 + Bushnell Elite 4200 6-24X42.
I use a Caldwell Rest, nevertheless it was not completly stable.

on the other side

5 shots at 55 yards with
JSB Jumbo…Read more

]]> 062ebb7db571ac4a04ba1f6798209bf2 camilof replied to the topic RAW Rapid Air Weapons HM1000 mini Review in the forum Other Guns https://talonairgun.com/forums/topic/raw-rapid-air-weapons-hm1000-mini-review/#post-169948 Fri, 29 Mar 2013 06:09:49 -0400 quote FVA:Nice looking rifle. Actually both of em. Looking forward to the rest of your report.
Thanks FVA

Today was a very complicated day for me, first i wake up with a severe headache, then i can´t go to field for accuracy test. On the other hand i make the velocity test in my back yard. The results are:}

Ammo: JSB Jumbo Heavy 18.13…Read more

]]> 603a7eebd53b944ccae7e7e1da54c557 camilof replied to the topic RAW HM1000 in the forum Other Guns https://talonairgun.com/forums/topic/raw-hm1000/page/2/#post-168751 Tue, 12 Mar 2013 03:31:29 -0400 First images about this airgun

This pictures are send for Jim to me, from this air rifle that i bought in Precision Airguns and Supplies.

]]> 4d649bb81183d43d47dbfd30a9b19cd1 camilof replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-168369 Wed, 06 Mar 2013 14:49:25 -0400 Thanks a lot. My S500 Rifle give almost 35 fpe,
then I believe that the s510 Rifle is more powerful. It is true??

]]> 95ff18b25a1ef412797628319cbd496d camilof replied to the topic Shot string from .22 cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/shot-string-from-22-cricket/#post-168348 Wed, 06 Mar 2013 05:21:02 -0400 quote octavius:According picture of manometer it was from 250bar to 100bar – nice shot string.

Superb…. I fall in love with russian/cz bulpups (not korean)

Where can i get a Criket airrifle in USA????

]]> 81ccfaf9cf28abbd413acd3ab7e757c7 camilof replied to the topic AA S510 Carbine FAC... Pics and Chrony numbers in the forum Other Guns https://talonairgun.com/forums/topic/aa-s510-carbine-fac-pics-and-chrony-numbers/#post-168346 Wed, 06 Mar 2013 05:14:51 -0400 quote The ROC:I’The S510 Carbine is perfect for in the field use. The numbers are very nice so this one is going to be kept bone stock…]
Hi, i know that this is and old Post.
But im very interested in know more about the performance of this airgun. Because today i make an order by amazon, but i`m hesitate between the carbina or rifle.

I want…Read more

]]> 9c45d2af3cac7040d146847dfa32d46e camilof replied to the topic 3 Regulated FX Royale 500s: Updated (QC issues) in the forum Other Guns https://talonairgun.com/forums/topic/3-regulated-fx-royale-500s-updated-qc-issues/page/4/#post-168276 Tue, 05 Mar 2013 03:06:01 -0400 quote the marine:how many shots are you guys getting before tragetory drops?
I have an FX 500 royale
I get 88 shots from 210 bar to 140, at 875 fps with JSB 25.4 grains
I try a lot of ammo. And the best are JSB KING

I read that the best pellets for ST are Defian Pellets. But i cant get it in .25 in USA

—un abrazo

]]> fdd8e8763f270319d9f27786157b7105 camilof replied to the topic RAW HM1000 in the forum Other Guns https://talonairgun.com/forums/topic/raw-hm1000/page/2/#post-167987 Thu, 28 Feb 2013 03:20:28 -0400 I put this post. And i read your answers. Thanks!
But anybody understand my question.
Why???
I want to know about RAW HM1000
not about TM 1000

HM1000 link http://www.precisionairgunsandsupplies.com/ProductDetails.asp?ProductCode=HM1000

http://www.spairguns.com/index.php/riflescarabinas/todo-theoben/carabinas/raw-hm1000.html

The difference is…Read more

]]> a4e8ec6522d5327daac9ae3a2cddda5a camilof replied to the topic RAW HM1000 in the forum Other Guns https://talonairgun.com/forums/topic/raw-hm1000/#post-167065 Thu, 14 Feb 2013 12:35:42 -0400 quote kazzz:It’s the mix between the TM1000 and Rapid.

At 110 yards (100m) the results were really terriblethem.

Where?

]]> ca1dc1592d63318a9d9f448d5589f54d camilof replied to the topic 915fps 18grains Talon SS lol in the forum Talon/Talon SS https://talonairgun.com/forums/topic/915fps-18grains-talon-ss-lol/#post-166871 Mon, 11 Feb 2013 00:01:25 -0400 Gringoloco
Donde conseguiste esa valvula??? gracias!

]]> 8505207f4c89f56d2ad4b50d10da8be8 camilof replied to the topic 2250 hpa ITS DONE!! in the forum Mods/Machinists https://talonairgun.com/forums/topic/2250-hpa-its-done/#post-164355 Thu, 27 Dec 2012 04:26:25 -0400 quote DeutschKSK:I want to convert my 2250 to HPA.

If you go here : http://jdsairman.com/newproducts.html

I was planning on getting this : Bulk Fill to Paintball Adapter = $59.00

I also want to get a air tank from him. I just don’t understand a regulator that well never used one before. I have a basic idea of what they do but I don’t know…Read more

]]> e35ad656ee8c763a197f9209f320d7e0 camilof replied to the topic How to take out the Valve? in the forum Mods/Machinists https://talonairgun.com/forums/topic/how-to-take-out-the-valve/#post-159178 Tue, 21 Aug 2012 19:12:59 -0400 Is very important to hold firmly but be must to be carefull to avoid damage the tank.
look the link, this is the best way
http://www.stealthresource.org/valve3.htm

]]> 5a5d744876864a13426311e77f40b750 camilof replied to the topic consistancy in the forum Talon/Talon SS https://talonairgun.com/forums/topic/consistancy/#post-159176 Tue, 21 Aug 2012 17:57:31 -0400 Hello
I have seen many talon string shots in the web and many of them show that it trend to decrease from the first shot to final shot.
Nevertheless if you fill at 3000 psi some shots may be are below ( because the high pressure close very hard the valve and the hammer hit can not to overcome the stronh from high pressure)
By example this…Read more

]]>