Thanks
rkave

Very few and possibly none at that speed.

The only way I would part with that amount of money for one is if I was at the FX factory and watched the entire process of them making me one.

I believe FX swap their staff between products on a weekly basis so they don’t…Read more

Several distributors in the UK are refusing to sell them anymore.

As for quality control, I don’t think they (FX) ever had any.

I have two friends who had the Impact and neither would group past 30 yards. Both got their £1600 refunded and bought Vulcan’s.

Here in the UK no powder firearm can be sold unless its been independently proof tested outside of what the manufacturers may or may not have tested.

There are 2 proof testing companies, 1 in London and 1 in Birmingham. They recently opened up their archives to show people what happens when things go wrong.

Shotguns,…Read more

A completely new regulator.

10 lbs of torque.

Who did the custom moderator and what does it look like ?

I am sure you will be buying a larger calibre barrel soon. good for FX

Yes, that’s him.

He got the barrel for free, not sure about the Impact.

I doubt they will make the x barrels for the impact, they need that hype to sell the new Crown. I am sure it will have elevated selling price. (FX way of thinking)

The X Barrels already fit the FX Impact and Wildcat.

Matt (FX Impact) was given one to test…Read more

Seriously, hope it performs to perfection for you. :8:

Thanks! I just got around to watching his video. It’s interesting that the Huma reg can be ordered for the Leshly…every cc saved is another few shots. I don’t need 920 fps. Anything over 800 is plenty, and I believe that can be done with the longer barrel without sacrificing much shot count.

Hoot:

I cant actually…Read more

:hoot:

Hold the phone Jones! I just stumbled across this post, and I don’t believe the Leshly is capable of 920 fps with 25gr JSB Kings.

How is this possible? Did you get the long barrel???…Read more

1. Pellet head size.
2. Crown of the barrel.
3. Rifling not uniformed.
4. Moderator clipping.

Comes down to elimination. Try removing the offset moderator and test again.

http://www.airgunbuyer.com/details.asp?cat=Accessories&SubCat=Bipods&Product=7170

For those that don’t know, over here, if you get caught with an air pistol over 6 FPE or an air rifle over 12 FPE without a license means a mandatory prison sentence of 5 years plus fine up to £5,000.

However, nothing wrong with tinkering, just keep it legal. 🙂

Do they do the Baracuda Match in 5.50 ?

Interesting, did it like the JSB 5.51 or JSB 5.53 or ?

Donny should make a contract with Ed to have his mods factory fitted.

If people is happy with the Leshiy then probably they will be even happier with the Ernesteshiy (Bull pub gnome) 😀

I doubt Ed will go for it as it would end up making the Leshiy too expensive.

250mm with H&N Barracuda Match 5.52 (21.1grain)

But I can change pellet to JSB 18.1grain.

Thanks,

Have you got any recommendations for .22 ?

Thanks,

Does that fatboy LDC just screw on to the existing out of the box Leshiy ?

Thanks,

Got my Leshiy today…

– Gen 2
– Calibre = 0.22
– Pellets = JSB 18.1 Grain
– Barrel = 350mm
– Fill Pressure = 250 Bar
– Human Reg = 110 Bar
– HST = +10 From Min
– FPS = 912
– Shots = 28
– FPE = 34

Silencer/Shroud removed.

Thanks,

I agree that LW barrel is really soft if aluminum clamp can create a choking effect.

Don’t think an aluminum clamp can create a choke on a steel barrel, regardless of the steel quality. Personally, i think your barrel for whatever reason does not have concentric…Read more

I think he ordered BSA Barrel Blanks.

Will just order an R10 barrel direct from BSA and get a gunsmith to machine fit it after a full inspection.

I don’t think a LW or Weihrauch button rifled barrel is going to suit the Leshiy clamping method.

Needs to be hammer forged.

Don’t think I can go through the hassle of having a naff LW one.

The 2 screws go just underneath the barrel about an inch before the end of barrel for the 250mm version. Without taking one fully apart, I would think it is a C-clamp pipe hanger…Read more

Have you spoken with Ed ?

I would try and get hold of a BSA .25 barrel and get it machine fitted. Will need turning down as BSA barrels are around 15mm OD and they need to be 12mm OD etc.

As of the tight spot, yes, there is one caused by barrel clamping system. However, it is not as tight as the choke.[/quote

Can’t see…Read more

– Fill the tank to 250 Bar
– Makesure the pellets used are all the same head size and weight depending on calibre.

Set the regulator to one of the following depending on calibre.

0.177 Set to 100 Bar
0.20 Set to 105 Bar
0.22 Set to 110 Bar
0.25 Set to 115 Bar
0.30 Set to 120 Bar

Fire a group of 20…Read more

If the group starts to increase as the number of shots goes up then it will be a problem with the regulator/pressure dropping. Which given the size of the air volume in the Leshiy is acceptable.

What setting is…Read more

It wont matter what make of barrel you have, if the crown is not there or badly machined, then it will group like a shotgun.