https://talonairgunforum.com/members/deerkllr/activity/ Activity feed for deerkllr. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 022be61c4196f2b3499cbf9da3e68dfa https://talonairgun.com/forums/topic/pellet-recommendation-for-talon-ss-please/#post-176853 Fri, 02 Aug 2013 21:38:04 -0400 Thanks guys ill get a tin of 18.1 next

]]> 2d8472a0b8de9722ff7d29af01bb7779 https://talonairgun.com/forums/topic/question-about-poi-change/#post-176771 Fri, 02 Aug 2013 01:10:04 -0400 Thanks charlie

]]> 217a91728dcf860d3933395aec3f41f8 https://talonairgun.com/forums/topic/talon-ss-won-t-cock/#post-176770 Fri, 02 Aug 2013 01:08:44 -0400 Thank you for the link walkonking . The tip about the spray graphite in the breach was awesome.

]]> 47c7923d4669167f42d828659a951cd5 https://talonairgun.com/forums/topic/talon-ss-won-t-cock/#post-176484 Mon, 29 Jul 2013 23:21:12 -0400 I just wanted everyone to know I fixed my rifle . I just want to say thank you to all of the forum members and randy at r&l . I even discovered that one of the baffles in my rifle was reversed. Thanks again guys.

]]> db0cad30f5a4bfc6166e66e30293f4d9 https://talonairgun.com/forums/topic/condor-ss-difficulty-cocking/page/2/#post-176380 Sun, 28 Jul 2013 23:51:31 -0400 I am aving the same exact issues with my talon ss.

]]> 59abc16c756a66ba2aa823f0d69cf746 https://talonairgun.com/forums/topic/talon-ss-top-hat/#post-174833 Mon, 01 Jul 2013 01:53:25 -0400 Thanks for the link to the dynamite driver going to order one tomorrow.

]]> d3c265e664ac49fab559f30e2cf151b3 https://talonairgun.com/forums/topic/talon-ss-top-hat/#post-174831 Mon, 01 Jul 2013 01:22:47 -0400 Well I think I have the top hat tight I used a .050 alen and it seems tight.

]]> 3773bfb50548130608c469d8b3aa4d7f https://talonairgun.com/forums/topic/talon-ss-top-hat/#post-174824 Sun, 30 Jun 2013 22:53:46 -0400 Could you tell me what Allen key I need for the set screw? Thank you.

]]> ae86c16c4cfb4c2703c5194583da2682 https://talonairgun.com/forums/topic/talon-ss-top-hat/#post-174808 Sun, 30 Jun 2013 20:26:35 -0400 I have to head to the hardware store here in a few ill see what I can find. All I had was a cheap Allen wrench it did have quite a bit of flex to it.

]]> 87202a275e8171ece739555d16803acb https://talonairgun.com/forums/topic/talon-ss-top-hat/#post-174803 Sun, 30 Jun 2013 19:12:11 -0400 Ok I just broke out the Swiss file set and flattened the set screws and cleaned them with some denatured alcohol. I added a drop of blue lock tite to them and reinstalled . I did notice while snugging them up that I could move the top hat some with the Allen wrench. Is that normal? I will have to let the thread locker dry and then try it again.

]]> 3ecc3144bba12b76f6e1f4a9315afc87 https://talonairgun.com/forums/topic/talon-ss-top-hat/#post-174802 Sun, 30 Jun 2013 18:47:27 -0400 Thanks for the advice I will get out the files and try that. Any idea how high I should set the top hat ?

]]> c5975d8d09f579e7aaea2329c5aa1e71 https://talonairgun.com/forums/topic/talon-ss-top-hat/#post-174793 Sun, 30 Jun 2013 17:19:52 -0400 Ok it has been explained to me that the tt top hats are for high flow valves. I put some blue lock tight on the grub screws iwill have to see how well she hold the adjustment now.

]]> 92e92b1fea7ca992cee798ef3c5ab49f https://talonairgun.com/forums/topic/hill-pump-d7/#post-173585 Wed, 05 Jun 2013 15:44:11 -0400 thanks guy i apreciate it.

]]> 6c9a5bebafad5b2b57d27cbfbec658f2 https://talonairgun.com/forums/topic/i-need-some-advice-guys/page/2/#post-172871 Sat, 25 May 2013 14:13:48 -0400 Thanks Robert I think a scuba tank would be the ideal way to go. There are several scuba shops in town. Most of them are within 15 min drive.

]]> 1a8cadf4095735fbb64898c846356440 https://talonairgun.com/forums/topic/i-need-some-advice-guys/#post-172864 Sat, 25 May 2013 11:54:58 -0400 Thanks for the info Robert. I have seen several used scuba tanks on Craigslist . Maybe I received some bad advice I was told that I wouldn’t be able to get that many charges from an 80 cf tank.

]]> 675dccba2dde418fe40c29e30bfbdcbc https://talonairgun.com/forums/topic/i-need-some-advice-guys/#post-172859 Sat, 25 May 2013 10:27:39 -0400 Yeah it’s quite an investment that’s for sure.

]]> 1b9e6bb0295815382883b2f703eb9770 https://talonairgun.com/forums/topic/i-need-some-advice-guys/#post-172850 Sat, 25 May 2013 03:11:45 -0400 I think one of the big reasons I was thinking about the .22 is that I can get pellets easily. I have to admit the .25 has a certain draw to it though. I was thinking that I could convert it later and use it specifically for hunting.

]]> 2c9770ee24e06ef2e6f74f1eb3062dac https://talonairgun.com/forums/topic/i-need-some-advice-guys/#post-172848 Sat, 25 May 2013 02:48:01 -0400 I mainly need the rifle for small game the largest I plan to take is ground hogs. The thing is I also like to shoot a lot and I’m in an aeria where I can shoot daily if I want. I sort of plan to start with a hand pump so I was thinking that if I went with a talon that I would get more shots per fill. But converting to . 25 later seems like it…Read more

]]> ae315dfd75416b0dba6035f5acc0243c https://talonairgun.com/forums/topic/i-need-some-advice-guys/#post-172830 Fri, 24 May 2013 23:57:49 -0400 Thanks man that’s great info. I was thinking the 18 in barrel in . 22 was a good all around compromise.

]]> dad506a8fd85115369acbc54b71b56d8 https://talonairgun.com/forums/topic/i-need-some-advice-guys/#post-172827 Fri, 24 May 2013 22:54:07 -0400 I have to admit I’m getting excited .

]]> 0ee66c112b935647f6b8efebcdc4aa32 https://talonairgun.com/forums/topic/i-need-some-advice-guys/#post-172826 Fri, 24 May 2013 22:49:28 -0400 I wouldn’t mind going the used route. Looks like there are a ton of rifles out there most of them have some mods.

]]> 7bd54951e54e1244e9c5b105b08aeccb https://talonairgun.com/forums/topic/noob-d50/#post-172688 Thu, 23 May 2013 14:27:46 -0400 Looks like the retailer where I bought this rifle is going to take care of it

]]> 2d215bf6dfe801fcde205f05ee3852f4 https://talonairgun.com/forums/topic/noob-d50/#post-172678 Thu, 23 May 2013 12:54:20 -0400 Its crazy I was just saying I like this rifle. I went to shoot it this am and there is zero power. Checked my receipt I bought it on 4-21. Looks like I will have to rebuild it or bring it back.

]]> 909eef63a908ead0ed498b9f3cec2bbb https://talonairgun.com/forums/topic/noob-d50/#post-172665 Thu, 23 May 2013 10:02:53 -0400 Wow that is pricey. I haven’t shot this rifle over a crony so I’m not sure the fps but it shoots pretty damn good. How does it do at 495a fps?

]]> 2e4bc521a94f3bcfd360f8146b296c14 https://talonairgun.com/forums/topic/noob-d50/#post-172643 Wed, 22 May 2013 21:52:30 -0400 I did put a centerpoint 4-16×40 scope on it and a different trigger. After I did all of that I had about 400 into it and I thought damn I should have bought a pcp rifle. Even so I think I’ll keep it . I kind of feel like I overpaid for it I didn’t realize I could have gotten it cheaper somewhere else. The rifle and original scope was 279

]]> 54b5d755ff286d44858cbb582a6e31c1 https://talonairgun.com/forums/topic/noob-d50/#post-172642 Wed, 22 May 2013 21:32:57 -0400 I really like the benjamin trail it has no trouble out to 50 yards. I have shot a 2 liter bottle with it at 100 yards. I made the one hundred yard shot using the benjamin pcp pellets. I shoot crossman premier hp out of it now and it has been an effective deterent on the starlings.

]]> 8cef7bad9f0ff0c567169f984c4fe957 https://talonairgun.com/forums/topic/noob-d50/#post-172636 Wed, 22 May 2013 19:13:42 -0400 Thanks guys I definately appreciate the advice. If I had to choose one mod to make the rifle more accurate what would you suggest. From what I can understand an aftermarket stock might be a good starting point.

]]> b4935e8abe1cdad36a99ce771219e957 https://talonairgun.com/forums/topic/noob-d50/#post-172633 Wed, 22 May 2013 17:21:52 -0400 Thanks for the advice. One more? If you don’t mind. Is this type of accuracy achievable with a factory rifle.

]]> 5533e651717a046ad1d5295e002656a5 https://talonairgun.com/forums/topic/noob-d50/#post-172626 Wed, 22 May 2013 15:29:51 -0400 I guess what I’m asking is this nitro piston rifle is way smoother shooting than the springers I’m used to. How much smoother shooting is a pcp rifle.

]]> 77a8fca20514d444f85b136c4abe0f79 https://talonairgun.com/forums/topic/new-member-stopping-by-to-introduce-myself/#post-172574 Tue, 21 May 2013 18:40:58 -0400 I must be getting a little excited to buy a new rifle

]]> aa31456c450737ea325099c3c19f6d62 https://talonairgun.com/forums/topic/new-member-stopping-by-to-introduce-myself/#post-172573 Tue, 21 May 2013 18:36:32 -0400 My bad I should have read a little deeper. Won’t happen again.

]]> 19d57bd71dafbb530d1054030eeee6d2 https://talonairgun.com/forums/topic/new-member-stopping-by-to-introduce-myself/#post-172570 Tue, 21 May 2013 18:15:04 -0400 Oops

]]> 4d32a8cfdb3155fa41330c276ff3ec8b https://talonairgun.com/forums/topic/new-member-stopping-by-to-introduce-myself/#post-172561 Tue, 21 May 2013 15:55:51 -0400 Thanks for the advice guys. This forum is a wealth of knowledge. I have been checking out the quick reference section its awesome.

]]> e6c7198331b08feb8b9766aa8bd80718 https://talonairgun.com/forums/topic/new-member-stopping-by-to-introduce-myself/#post-172517 Mon, 20 May 2013 18:12:58 -0400 Thanks guys

]]>