Talonairgun | deez-nutz | Activity https://talonairgunforum.com/members/deez-nutz/activity/ Activity feed for deez-nutz. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 2411a651fdf7df4c2c646c8264838a92 deez-nutz replied to the topic JSB .25 Mark II Heavy's in the forum Airgun Technology https://talonairgun.com/forums/topic/jsb-25-mark-ii-heavy-s/#post-239247 Fri, 13 Nov 2015 02:10:18 -0400 Appreciate the replies….. i’m regularly shooting out to 90-100 yards on Crows. The Kings shoot very well for me at about 930 fps. I do have a Hosp area at around 60 yards where I’m thinking the Heavy’s would have a tighter group to buck the wind on those high lines. Small target…. 😆

]]> c1c94c201762d16c3a6622338c218e66 deez-nutz replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/page/2/#post-239232 Thu, 12 Nov 2015 20:33:22 -0400 quote LURKER #1:QUESTION
Wouldn’t shoving the felt over the empty o-ring grove shave it or otherwise leave the o-ring grove contaminated 🙄
Could such contamination eventually fux up a new o-ring. :whistle:
Good question Lurker……I never thought of that, but my rifle is still shooting as consistent as ever since I put the ring back in…Read more

]]> dadf834685448a1dd942adf7fe76a07a deez-nutz replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/#post-239228 Thu, 12 Nov 2015 18:47:32 -0400 Another good tip Ville…….Thank you Sir!

Is that doll supposed to be Hoot? I see those red leather shorts and that pitch fork….Just wondering…… :rofl:

]]> 8192354128046402075191025d0071c4 deez-nutz replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/#post-239048 Tue, 10 Nov 2015 02:52:22 -0400 Did the felt cleaning pellet method this afternoon when I got home from work. Had that damn little o-ring seated in 30 seconds! Used a pick and the end of a 3mm allen wrench to hold in place and push into the ring groove. Pulled shroud and blew felt pellet out the barrel. Damn, that .25 is fucking loud! Had me running back inside to hide!…Read more

]]> de9c56422cd7367482a1fb767fec94e8 deez-nutz replied to the topic degassing and dry firing in the forum Airgun Technology https://talonairgun.com/forums/topic/degassing-and-dry-firing/#post-239047 Tue, 10 Nov 2015 02:43:38 -0400 quote geaux:Deez, here’s the pic. More later, gotta go read to the kids
No pic geaux, but thanks for clarifying what I was talking about. Look forward to hearing your results when you get a chance. I don’t think I will adjust mine, I was just looking for info on how that spring correlates with pull weight.

Hooter, I know the spring your talking…Read more

]]> 08dc5d498eb6c4080a0bc78dad6743c4 deez-nutz replied to the topic degassing and dry firing in the forum Airgun Technology https://talonairgun.com/forums/topic/degassing-and-dry-firing/#post-239032 Mon, 09 Nov 2015 21:38:55 -0400 quote Hoot::hoot:

The trigger spring tension is a black thing at the end of the trigger spring and there is a hex nut that you loosen and move the black thing closer or farther away from the trigger to increase or decrease the trigger spring tension.

Hoot:

Hoot,
So if mine is all the way to the right in the third hole, does this mean that…Read more

]]> 1df0e9d5c6ca12a7ca75fcc882f86609 deez-nutz replied to the topic degassing and dry firing in the forum Airgun Technology https://talonairgun.com/forums/topic/degassing-and-dry-firing/#post-239022 Mon, 09 Nov 2015 18:42:22 -0400 geaux,

If you don’t mind my asking, which hole was that trigger tension spring set? Mine from the factory has three holes with the screw stop positioned into the hole that is all the way to the right. Moving the spring to the center or left seems as though it would increase tension. Did you just remove it? How does your trigger break now?…Read more

]]> 7db26abf19a77cf9db462ba5d18917bd deez-nutz replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/#post-239006 Mon, 09 Nov 2015 14:35:58 -0400 quote Sir Ville:You dumbasses! The easiest and safest way is to use VFG felts used for barrel cleaning. Just push one in so it clears the o-ring groove and then the o-ring after. You just need to insert it a couple millimeters into the bore. Many of you guys know that feeling painfully well. :fishinghole:
Thanks Ville!……That was my first…Read more

]]> 3daa50bce2276d25d6cc4361c42be437 deez-nutz replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/#post-239005 Mon, 09 Nov 2015 14:30:41 -0400 quote Zonk:Take a set of drill bits and see which one fits into the barrel. Take that bit to the hardware store and see which doll rod matches. Slide doll rod down barrel to o ring groove, lube pellet, slide into chamber, push rod to breech with finger over hole and o ring should drop into groove. Make sure doll rod is slightly smaller than drill…Read more

]]> 741c396578e02e7e6899a6047fe6bee7 deez-nutz replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/#post-238994 Mon, 09 Nov 2015 11:44:11 -0400 quote LURKER #1:Deez nutz,
I just tried a 1/4″ rod in a .25 barrel and it won’t go 😳

For my .22 Vulcan I used Tipton cleaning rod with a plastic .22 ram that I cut the center point off so it was flat.
Silicone the o-ring good and the second time you try to position it, it should slip in place like majic :suprisedn:
After that they seem…Read more

]]> 5faab9d2de6d636c5b02c0a94ecac6c6 deez-nutz replied to the topic That Pesky Breach O-ring!!!! in the forum Airgun Technology https://talonairgun.com/forums/topic/that-pesky-breach-o-ring/#post-238972 Mon, 09 Nov 2015 02:01:04 -0400 Thanks Lurker! Any Idea what size dowel? I’ll make a run to Lowe’s tomorrow to pick one up. So I squeeze that ring and put it in sideways, then push against the dowel thats now lined up to the ring groove at the breech end with a pick, until it seats in the groove? PS……I’ve got a .25……

Chime in Zonk! Thanks for supplying that info to…Read more

]]> baf615b09622b3a09f95eb59908e2383 deez-nutz replied to the topic Advice for Vulcan cleaning in the forum Airgun Technology https://talonairgun.com/forums/topic/advice-for-vulcan-cleaning/#post-238919 Sun, 08 Nov 2015 11:30:53 -0400 I also use the Patch Worm kit for all of my fire arms, with “Gunzilla” on the internals and Ballistol or Rem Oil on the external stuff. I feel that wiping down with the Rem Oil gives my stock a deeper, darker shine. I find all three products to be excellent.

]]> 1697f1dcc5ad06015bbe1858f6b99827 deez-nutz replied to the topic Best Way to Polish Hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/best-way-to-polish-hammer/#post-238638 Wed, 04 Nov 2015 18:27:49 -0400 quote Zonk:It’s not a big job to do as luker has said. Great string also Deez!
Thanks Zonker!

]]> 65c097eb53a5709a98b2fb6c9a8e71a1 deez-nutz replied to the topic Best Way to Polish Hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/best-way-to-polish-hammer/#post-238636 Wed, 04 Nov 2015 18:25:20 -0400 quote Sir Ville:I wonder … Can the same method be used for polishing the Knob of ones Dick ?? The Uncle Hootie was wondering about that the other day – and so am i. 😯

I’m thinking Uncle Hoot may need a little synthetic help to get his knob polished now a days, the Knob on my hammer gets a regular polishing anytime I’m fuxing with it….…Read more

]]> 244c00d3efcf0a9d050549a3d117bc84 deez-nutz replied to the topic Best Way to Polish Hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/best-way-to-polish-hammer/#post-238609 Wed, 04 Nov 2015 11:24:17 -0400 :rofl: :rofl: Sounds like you’ve been challenged Kris!….Git-R-Done!……..Oh, and don’t forget the pics!…… :8:

]]> 11f412c1ca33e8523eeacdf21d5f2d7f deez-nutz replied to the topic Best Way to Polish Hammer in the forum Airgun Technology https://talonairgun.com/forums/topic/best-way-to-polish-hammer/#post-238582 Wed, 04 Nov 2015 00:06:15 -0400 Thanks for the info Ville and Lurker……Good rainy day project, along with trying some different positions with the two grommets I’ve got on the hammer spring. Wishing I had the skills for one of those see thru covers!……

I chronied two mags yesterday on a 250 BAR fill, with one grommet on the rear and the other on the front of the hammer…Read more

]]> ca7e5d2df3193d20619dc4f28fd0c1b5 deez-nutz replied to the topic Anyone posted how to adjust Vulcan trigger? in the forum Airgun Technology https://talonairgun.com/forums/topic/anyone-posted-how-to-adjust-vulcan-trigger/#post-238178 Tue, 27 Oct 2015 17:50:48 -0400 So does adjustment of the bottom screw for sear travel relate to the weight of pull, or is that set with the linkage rod spring tension? I have mine apart for the hammer spring grommet mod, so I just a soon try to get my trigger the way I like it…..

]]> b3b98a6873e3e538a3cecf99044fd88d deez-nutz replied to the topic Hammer fix in the forum Airgun Technology https://talonairgun.com/forums/topic/hammer-fix/page/7/#post-238107 Mon, 26 Oct 2015 17:32:42 -0400 quote Zonk:Pret, these screws are for the side plate and all the other covers on the out side of gun. Some guys are stripping the heads and these are replacement screws. And NO you can’t buy any, they’re to “giveaway” my friend.
Zonk,
I’ll be working on the mod this evening when I get home from work. Using the “tap to seat” method you and Lurker…Read more

]]> f159f18cf0b74b2852a9d1f585daca95 deez-nutz replied to the topic Bit Size for Cover Plates in the forum Airgun Technology https://talonairgun.com/forums/topic/bit-size-for-cover-plates/#post-238105 Mon, 26 Oct 2015 17:17:16 -0400 quote eelect:Doesn’t the Vulcan come with long red T handle allan wrench. I have one and it fits stock screws perfectly. I don’t know where else it came from as I don’t remember buying it.

Sent from my Z30 using Tapatalk
Thanks for the info guys……..eelect, I didn’t get a T-handle hex with my Vulcan. Would have been a nice touch!

]]> ae750056e9fb217b89cae40f1914cff6 deez-nutz replied to the topic Hammer fix in the forum Airgun Technology https://talonairgun.com/forums/topic/hammer-fix/page/5/#post-237729 Wed, 21 Oct 2015 17:06:09 -0400 :rofl: :rofl: :rofl: Good one Hoot: !quote Hoot::hoot:

Ignorant Dolt!

Even I know that would be a “Peeker”….

Hoot:

]]> 007ad3f2f80b023bf5e842cacc0ede58 deez-nutz replied to the topic VULCAN .25 LAPPING THE BORE in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-lapping-the-bore/page/2/#post-235253 Tue, 08 Sep 2015 17:42:55 -0400 quote Zonk::rofl: good one Jan! I don’t think Danuts has enough time in life to learn that language.
Zonk,
Kinda sounds like he’s fussing about something…..Don’t think I could even start to understand the Arabic language…….Just looking at the vids and trying to figure what he’s fussing about….. :rofl:

Sniperqty sure seems knowledgeable…Read more

]]> 6a16ee04a078a62a270eb3d1b899f973 deez-nutz replied to the topic VULCAN .25 LAPPING THE BORE in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-lapping-the-bore/page/2/#post-235252 Tue, 08 Sep 2015 17:37:07 -0400 quote octavius:D Nuts …anyway you can start learn Arabic. I think it will be faster than Sniperqty make video in English :rofl:
Yeah, that’s was a good one octavius!…….. :biggrinn:

]]> 9dc2c8abc1b1144a448bd3fea22a2cf7 deez-nutz replied to the topic VULCAN .25 LAPPING THE BORE in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-lapping-the-bore/page/2/#post-235233 Mon, 07 Sep 2015 22:49:48 -0400 Not me!….Way over my head Fox!……..Maybe with a CD or Youtube Vid! I sure wish those youtube vids put out by the guy from Kuwait were in English. Good stuff right there. I’ll wait on you and Hoot and Keyersoze and Sir Ville to let me know how easy and well it works. Not in that “fuxing mood”……… :mrgreen:

]]> 9973dcef7c8b05b00c419be93cb54a2a deez-nutz replied to the topic VULCAN .25 LAPPING THE BORE in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-lapping-the-bore/#post-235220 Mon, 07 Sep 2015 17:46:56 -0400 quote Hoot::hoot:

Dear Nuts,

The problem with these high end pcp’s is everyone, me too, wants to “improve” them. Up till recently, there were things that needed to be done. The Vulcan has pretty much straightened out these “fix” up problems.

The only two items left on this gun is to quiet it down in .25 caliber, and to get rid of that dang…Read more

]]> 9f03aa7381418a94ed58d985bce6a4cd deez-nutz replied to the topic VULCAN .25 LAPPING THE BORE in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-lapping-the-bore/#post-235208 Mon, 07 Sep 2015 11:07:50 -0400 quote foxback:The Vulcan is not a high end, tinker’s gun.
Some say that it has the best barrel, that can be had on an airgun.
The CZ barrel, really is hard to get out right, & is not found on too many air guns.

The more you shoot the Vulcan the better it gets.
Don’t mess with a good thing, you’ll be sorry. 😯

“if it aint broke, don’t fix…Read more

]]> 0eeecdadfff1414ce1310af17be0b281 deez-nutz replied to the topic VULCAN .25 LAPPING THE BORE in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-lapping-the-bore/#post-235207 Mon, 07 Sep 2015 11:05:58 -0400 quote TopAirMan:Wait a minute….let me get this straight. You like the way it shoots but want to try lapping the bore of a $1600 airgun when you’ve never tried it before?
Are you out of your freaking mind? Leave it the f*** alone and just enjoy shooting it! Your Vulcan will love you for not mucking it all up and will more than likely improve…Read more

]]> d3890a19a39e14c8d479c86396418398 deez-nutz replied to the topic VULCAN .25 LAPPING THE BORE in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-25-lapping-the-bore/#post-235187 Sun, 06 Sep 2015 20:38:57 -0400 quote eelect:I can do a quick reply. I think you need a rod system to polish barrels as you can’t apply enough pressure to patch worm to do any major polishing. I would take out breech oring because it has no reason for be there when doing the job. When I polished mine I maybe did 50 strokes all together to get the job done. I didn’t want to go to…Read more

]]> 989c43a1450eba214f1502f80b3238f0 deez-nutz replied to the topic Interesting discovery on .25 vulcan. in the forum Airgun Technology https://talonairgun.com/forums/topic/interesting-discovery-on-25-vulcan/#post-234320 Wed, 19 Aug 2015 22:34:41 -0400

Here is a 2 mag string of my Vulcan .25 shooting KINGS…..I started at 250 BAR and was reading around 200 BAR after second mag. Going to run a full regulator string soon. FPS was tightening towards the second mag. Not an expert by any means, but I’m thinking my regulator is working correctly. I’m running compressed Nitrogen and have about…Read more

]]> 51e7381a70dd54e32733a81fdf3c8a22 deez-nutz replied to the topic Hex Keys for Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/hex-keys-for-vulcan/#post-234238 Tue, 18 Aug 2015 22:20:01 -0400 Gonna head to Lowes or Home Depot and look for a kit. Hoping that 1.5mm is not hard to find. Thanks Gents!

]]> 86546e93ed905900c13b86fbd00a1e1e deez-nutz replied to the topic Hex Keys for Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/hex-keys-for-vulcan/#post-234214 Tue, 18 Aug 2015 17:24:24 -0400 quote Zonk:I’d get both, they’ll come in handy. Just give a light tap with a small hammer on the end of allen to break free the screws.

Will do Zonk……Do you recall the sizes I need? 2mm, 3mm,…etc.? I’ll pull the manual when I get home. Was hoping to order tools from my work puter.

Hope your “Ernest Tune” has you splitting paper sideways…Read more

]]> 28a611f672af1404c7154ae6f2d7af71 deez-nutz replied to the topic Moderators and Barrel Harmonics in the forum Airgun Technology https://talonairgun.com/forums/topic/moderators-and-barrel-harmonics/#post-233588 Mon, 10 Aug 2015 22:26:20 -0400 quote keyser soze:The same phenomenon happened to a cricket .25 when I added a NC shroud. I noticed it seems to be related to the uses of shrouds equipped with a grub screw

Key,
It’s a screw on and it works very well……..The shroud may be a tad tight when I screwed on, putting some tension on the barrel. I’ll check next time I clean.

]]> 0b4213f3788a9f6bd3c14356efa65de7 deez-nutz replied to the topic Moderators and Barrel Harmonics in the forum Airgun Technology https://talonairgun.com/forums/topic/moderators-and-barrel-harmonics/#post-233587 Mon, 10 Aug 2015 22:23:18 -0400 quote TopAirMan:Shouldn’t make a “hill of beans” unless the moderator internals are not concentric to the threads that locate it on the muzzle. I’ve positioned my “Hush” shroud just about anywhere rotation wise with absolutely no change of POI. I don’t feel harmonics comes into play unless you jam the mod tight against the receiver thereby…Read more

]]> 9383185badb76da06e66f94fae0e673d deez-nutz replied to the topic New Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/new-vulcan/page/3/#post-232936 Sat, 01 Aug 2015 14:37:02 -0400 Those readings are pretty much a carbon copy of mine from Tony. I averaged around 915 fps………I’ve heard best velocity should be from 920-940 fps with our .25 Vulcans.
I’ve got a new crony coming my way next week. I’ll re-confirm.

]]> b1d9a5a695a212feb3b7bc3c6853aac0 deez-nutz replied to the topic On the potential to reduce muzzle blast of the .25 Vulcan... in the forum Airgun Technology https://talonairgun.com/forums/topic/on-the-potential-to-reduce-muzzle-blast-of-the-25-vulcan/#post-232237 Fri, 24 Jul 2015 18:54:04 -0400 Thanks Salt!

I will look him up…….Hoping he might have the adapter as well.

Jim

]]> 88eb21cf41ce429dae43d3cc577e94d7 deez-nutz replied to the topic On the potential to reduce muzzle blast of the .25 Vulcan... in the forum Airgun Technology https://talonairgun.com/forums/topic/on-the-potential-to-reduce-muzzle-blast-of-the-25-vulcan/#post-232220 Fri, 24 Jul 2015 15:51:12 -0400 quote Hoot:quote eelect:Uncle Hoot
Have you gotten a hold of a Vulcan? Do you provide shroud mods.

This shroud mod is not technically difficult to do. It requires a hand drill, a 1 mm to 1.5 mm drill bit, which is available at any large hardware store, some masking tape and a pencil.

I can say this…with a DonnyFL moderator, attached with…Read more

]]> fd6f1b261f38ec6304f20fb9b6b5b72e deez-nutz replied to the topic Sound Levels (dB's) in the forum Airgun Technology https://talonairgun.com/forums/topic/sound-levels-db-s/#post-230139 Tue, 30 Jun 2015 17:33:37 -0400 quote oakey631:quote deez nutz:I squeezed off a few rounds with my new .25 in my backyard yesterday…….Granted, this is my first PCP, but I was amazed at the low report of my Vulcan. Much quieter than my Diana 34 springer. Houses in my neighborhood are 5 yds. apart….in the privacy of my fenced in back yard, the thud of the .25 hitting a 2 x…Read more

]]> f8d2a02c8aa401a2fe3ae54959e8a3fe deez-nutz replied to the topic Sound Levels (dB's) in the forum Airgun Technology https://talonairgun.com/forums/topic/sound-levels-db-s/#post-230132 Tue, 30 Jun 2015 17:05:48 -0400 I squeezed off a few rounds with my new .25 in my backyard yesterday…….Granted, this is my first PCP, but I was amazed at the low report of my Vulcan. Much quieter than my Diana 34 springer. Houses in my neighborhood are 5 yds. apart….in the privacy of my fenced in back yard, the thud of the .25 hitting a 2 x 6 and the twang of the hammer…Read more

]]> 2650f54f5a909e6de4c9546c39b25fc6 deez-nutz replied to the topic VULCANIZED! in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcanized/#post-230018 Mon, 29 Jun 2015 01:02:43 -0400 quote oakey631:Sweeeeet bust deeez nutz all over da place just shoot this Mother as much as possible then screw with shit!

Lol……..That’s what I holler to dem tree rats that get on my feeders! “Oh no you don’t!” “Not deez nuts!”…….. :rofl:

]]> a2839a111d23e3ea5fa105aeff01b4e4 deez-nutz replied to the topic VULCANIZED! in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcanized/#post-230014 Mon, 29 Jun 2015 00:39:15 -0400 quote LURKER #1:Deez nutz,
I had Tony mount my Aeon 6-24X50mm scope which has 30mm tube with his quick release rings.
My measurement of scope height is 2 1/2″. Hope that helps. Oh, my Vulcan is a .22 and already giving me a 1/2″ 3 shot group at 50 yards. If the damn wind would stop I wouldn’t have any excuse for all my larger groups.

Thanks for…Read more

]]> e3f8d162748bbbb0d48e5299c441662e deez-nutz replied to the topic VULCANIZED! in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcanized/#post-230013 Mon, 29 Jun 2015 00:34:45 -0400 quote eelect:quote deez nutz:My new Vulcan is on the brown truck and will be delivered tomorrow………So looking forward to its arrival! I got the second to last one in .25 from Tony! Tony sent me a photo of his last two and I chose the darker wood. The last one looks sweet too! dePlummer, you listening? LOL

Anyways, I’ve got a few tins of…Read more

]]> 0b8e34329cfc8ed0f158832942822b96 deez-nutz replied to the topic Bubble Level for Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/bubble-level-for-vulcan/#post-229778 Fri, 26 Jun 2015 15:12:55 -0400 quote ElmerFudd:I personally like the Holland’s Signature series anti-cant level. It looks the best in my opinion. Some people complain it’s hard to install and level with your reticle but just install it on your scope and get it level prior to installing it on your gun. I installed it in front of the elevation/side parallax knobs. Open both…Read more

]]> cad017c654cab011b20bc535c68abb1d deez-nutz replied to the topic Bubble Level for Vulcan in the forum Airgun Technology https://talonairgun.com/forums/topic/bubble-level-for-vulcan/#post-229777 Fri, 26 Jun 2015 15:07:47 -0400 Funny shit right there Zonk!…….Mine’s bigger than Led’s!……. :8: Your level is certainly easy to see! Genius I tell ya!… :rofl:

]]> 0961c7b6a76c0011cac267d8925153ad deez-nutz replied to the topic VULCAN picture thread... in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-picture-thread/page/4/#post-229703 Thu, 25 Jun 2015 22:37:22 -0400 Thanks AJ3! Downloading that program now……. :thumb:

]]> 0b713126e3e1fe001cd090a0e911feb7 deez-nutz replied to the topic VULCAN picture thread... in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-picture-thread/page/4/#post-229701 Thu, 25 Jun 2015 22:15:30 -0400 I’m having Tony @ TT mount and level my Hawke Tacticle. I asked him to zero my Vulcan .25 to 50 yds. What would my approximate near zero be?

]]>