Talonairgun | demp223 | Activity https://talonairgunforum.com/members/demp223/activity/ Activity feed for demp223. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 3150b79587a8cf0976a0a57f0ec01136 demp223 replied to the topic Tuning your gun in the forum EdGun https://talonairgun.com/forums/topic/tuning-your-gun/#post-247808 Sat, 05 Mar 2016 21:24:43 -0400 2-4 fps from shot to shot and 9-12 fps max spread over entire string is normal.

]]> dcb53e40fae521351080f68292dee1f5 demp223 replied to the topic R3M .25 Data in the forum EdGun https://talonairgun.com/forums/topic/r3m-25-data/#post-244074 Sat, 23 Jan 2016 05:00:49 -0400 Reg, trigger all fine polished and tuned. Light coat of Balistol on Reg parts. Silicone grease on Orings. As for barrel I just run a handful of Balistol coated pellets every few hundred and that keeps it pretty clean and worry free.

]]> 1b6687b64d1a5de00157ebce56c21dd0 demp223 replied to the topic R3M .25 Data in the forum EdGun https://talonairgun.com/forums/topic/r3m-25-data/#post-243432 Thu, 14 Jan 2016 04:34:07 -0400 940 fps with 2.33 fps SD and 9 fps Max spread over 72-74 regulated shots. Close to 90k shot count on the 25.
JSB 25grain unsorted.
Long version. 1″ at 100yds 7-10 shot group. Multiple shots into one ragged hole then a couple around that open up group.
Unsorted pellets, slight change in wind, trigger pull between breaths etc etc. The rifle is…Read more

]]> 1825dac45f373efbb71d5f69ce448ecb demp223 replied to the topic Hello and help in the forum EdGun https://talonairgun.com/forums/topic/hello-and-help/#post-241287 Tue, 15 Dec 2015 06:02:49 -0400 25 long with JSB 25s at 940fps. 72 shots regulated is a rabbit destroyer and extremely accurate out to 150.

]]> 5cc2906440434c97d4f0c279f62560de demp223 replied to the topic .25 r3m long qd stud in the forum EdGun https://talonairgun.com/forums/topic/25-r3m-long-qd-stud/#post-241286 Tue, 15 Dec 2015 05:59:33 -0400 Just predrill your hole so it goes into one of the supports between upper and lower section instead of into hole opening.
Maximum wood penetration. :biggrinn:

]]> 4709b53f0798fb4d7680b573f5370f20 demp223 replied to the topic Matador .25 r3m long in the forum EdGun https://talonairgun.com/forums/topic/matador-25-r3m-long/page/2/#post-239744 Fri, 20 Nov 2015 04:59:25 -0400 My 25 pushes JSB 25s at 940 fps for appx 72-75 shots on the reg. SD is 2.33 and Max spread is 9fps.
I’ve got over 80k pellets through it on the original Orings still. I did change over from the SS to multi shot kit at around 50k pellets.
It’s a beast.

]]> 1efdb98f70e5506234276d9ccbdce7ff demp223 replied to the topic Matador r3m .25 shooting predator poly mags in the forum EdGun https://talonairgun.com/forums/topic/matador-r3m-25-shooting-predator-poly-mags/#post-239743 Fri, 20 Nov 2015 04:52:13 -0400 I concur with Keyser^^^. My 25 long is set to 940fps and the poly mags are good out to 60. They just start grouping funky as you go past. At 885 fps they shoot same poi as Kings out to 75.
At 940gps they are around 3/4-1″ at 60yds as opposed to kings producing one ragged hole. Still acceptable for hunting and the pure energy dump is just wicked vicious.

]]> 7385aba91724354fa6068b45dae51774 demp223 replied to the topic Case closed: Spread larger than 50fps in 54 shots in the forum EdGun https://talonairgun.com/forums/topic/case-closed-spread-larger-than-50fps-in-54-shots/#post-230211 Wed, 01 Jul 2015 02:55:03 -0400 The pellet variable won’t affect it that much but will bump out the the mid teens on ES and 4-7 fps on SD.
I did a few strings with sized and weight sorted pellets then threw in several known heavier and lighter with corresponding head sizes and the spread opens up a handful more fps over normal.

]]> f7566f00550e60d4a3d143f4aa921852 demp223 replied to the topic Case closed: Spread larger than 50fps in 54 shots in the forum EdGun https://talonairgun.com/forums/topic/case-closed-spread-larger-than-50fps-in-54-shots/#post-230207 Wed, 01 Jul 2015 02:05:42 -0400 Consistent chronograph readings are obtained only by repetition.
Build a jig to hold chrono and rifle a set distance apart with barrel level and sighted in a couple inches above chronograph and appx 3ft back.
You can’t reload and shoot rifle faster than the regulator can recharge unless there is a serious problem with the washer stack or oring…Read more

]]> e75ef842beb9eb2adf9d7383b73d9573 demp223 replied to the topic Edgun Fill Port Protector in the forum EdGun https://talonairgun.com/forums/topic/edgun-fill-port-protector/#post-229623 Wed, 24 Jun 2015 21:25:36 -0400 Just ordered two. Looks much nicer than my custom hacked rubber nub plugs.

]]> 0c5a28ad7409d397e9fb23ddf92a7150 demp223 replied to the topic Testing EDgun Matador .22: Speed vs Accuracy in the forum EdGun https://talonairgun.com/forums/topic/testing-edgun-matador-22-speed-vs-accuracy/page/2/#post-229621 Wed, 24 Jun 2015 21:01:33 -0400 I don’t know what pressure it’s set at. Only know where string drops off per Eds gauge on gun and that’s pretty dam close to 100 bar
Regulator came marked at 130 shooting close to 940-950 fps initially.
I posted strings when I first got it and started tuning. Initial pre break in ES was 50fps. Some hammer tuning brought it down to the 20s. After…Read more

]]> c69d3004501288979b06d1a47638db1d demp223 replied to the topic Testing EDgun Matador .22: Speed vs Accuracy in the forum EdGun https://talonairgun.com/forums/topic/testing-edgun-matador-22-speed-vs-accuracy/page/2/#post-229579 Wed, 24 Jun 2015 05:35:00 -0400 At 60-80*. Sea level. 885fps with 9 fps ES, 2.33 SD =112-115 shots.
205-100 bar on Edgun gauge before string starts to taper off.
I know the Ed gauge is accurate as it matches with a few quality fill gauges.
I’ve chronoed 100s of strings on my Eds.

]]> 95726f87962a2adb7fbe7dd2c15b56df demp223 replied to the topic Testing EDgun Matador .22: Speed vs Accuracy in the forum EdGun https://talonairgun.com/forums/topic/testing-edgun-matador-22-speed-vs-accuracy/#post-229540 Tue, 23 Jun 2015 19:33:12 -0400 885 fps works great for small game. I use 25 for bigger game or longer distances. The important thing is to get your shot string as flat as possible for consistent fps.
I hunt doves at 100 yds in up to 10mph winds no problem. I do miss occasionally as they are small bird but 8 neck shots out of 10 is normal at that distance on average.
I’ve shot…Read more

]]> fb5ddf8bc03e2f7ade3ae549298853cd demp223 replied to the topic Testing EDgun Matador .22: Speed vs Accuracy in the forum EdGun https://talonairgun.com/forums/topic/testing-edgun-matador-22-speed-vs-accuracy/#post-229536 Tue, 23 Jun 2015 18:53:00 -0400 I’ve got long version so my adjustment will be different than standard barrel version.
It’s approximately 1/4 turn in from stock 130 bar setting on my regulator.
You’ll have to fine tune Hammer spring to get flattest curve from top of fill at 205bar until it drops off regulator.
Make very small adjustments to regulator after that to get target speed.

]]> 615de04373997206a3183cd0c379378b demp223 replied to the topic moist on side of breech? in the forum EdGun https://talonairgun.com/forums/topic/moist-on-side-of-breech/#post-229533 Tue, 23 Jun 2015 18:37:37 -0400 I say you have an extremely small leak past your lower breech seal. Nowhere near enough to notice physically but sign of condensation build up would suggest to me a small amount of air getting past seal on each shot cooling outside of tube and your breath is causing it to condensate. Snug down breech screws or replace crush washer.

]]> ce8ffec22b14e01cd06c2c86aca5ea13 demp223 replied to the topic Bottlewasher depinger in the forum EdGun https://talonairgun.com/forums/topic/bottlewasher-depinger/#post-229531 Tue, 23 Jun 2015 18:28:02 -0400 I won’t put anything aside from air and a bit of silicone grease on orings inside my tubes.
The hammer strike right next to ear and pellet striking target are louder than any ping.

]]> 9b4b92ab29a59d5d10600fb52812b551 demp223 replied to the topic Testing EDgun Matador .22: Speed vs Accuracy in the forum EdGun https://talonairgun.com/forums/topic/testing-edgun-matador-22-speed-vs-accuracy/#post-229529 Tue, 23 Jun 2015 18:23:41 -0400 I’m curious what the other groups in each test looked like.
You show us best two groups only. Let’s see the others so we have more of a truer measurement of group averages at each speed from your particular gun with you shooting.
You should do test indoors to eliminate wind variable. Side walls at a range get a lot of swirling winds
I’ve already…Read more

]]> d19244650f3c977d50b1ee36f9f528e4 demp223 replied to the topic Testing EDgun Matador .22: Speed vs Accuracy in the forum EdGun https://talonairgun.com/forums/topic/testing-edgun-matador-22-speed-vs-accuracy/#post-229467 Mon, 22 Jun 2015 23:16:45 -0400 Was this an indoor range without wind?
Even a light breeze wind of 2-3 mph will noticeably open up groups
Higher speeds at closer ranges will generally tighten groups up to a point.
I’ve shot my R3 22 at over 1000 fps with JSB 18s and maintained 1/2″ or 13mm groups with great consistency at 50yds.
However, Push it out to 100 yards and farther…Read more

]]> 8e20aa2b2d2d400b6b52c0c0b8757711 demp223 replied to the topic Anyone ever try lubed pellets in the R3M? in the forum EdGun https://talonairgun.com/forums/topic/anyone-ever-try-lubed-pellets-in-the-r3m/#post-228531 Fri, 12 Jun 2015 05:50:36 -0400 A light coat of Balistol on a couple dozen pellets every few hundred shots seems to keep the barrel very clean and accuracy spot on in both my Eds.

]]> 2a6bd67ffd08f28f1a39ea3f36dd68de demp223 replied to the topic Is it worthwhile to sort pellets? in the forum EdGun https://talonairgun.com/forums/topic/is-it-worthwhile-to-sort-pellets/#post-228530 Fri, 12 Jun 2015 05:46:23 -0400 It depends on what you are looking to do.
Maximum accuracy for competition to squeeze out every possible point.
Maximum velocity and pellet stability for accuracy to hunt with 22 cal.
Then yes, sort
I sorted close to 10 thousand pellets by head size and then weight.
Lots of hours spent doing it. Lots of interesting results testing each…Read more

]]> 2694122c72bce81b474df64852ae35b3 demp223 replied to the topic Ed, about your barrel specifications in the forum EdGun https://talonairgun.com/forums/topic/ed-about-your-barrel-specifications/page/3/#post-227520 Fri, 29 May 2015 05:54:56 -0400 Regulator was adjusted and HST turned down to get it to shoot JSB 13s at 810 fps =20fpe with the beautifully flat shot string Eds regulators can produce. Excellent combo.
Rifle was extremely accurate in FT and I did quite well the few times I got to participate. Won first match at Ione.
Only missed twice my last event at Diablo and would have…Read more

]]> d2348770f105fa7c9782e2001ba3aac0 demp223 replied to the topic Fao of ed regarding beech stocks on edguns in the forum EdGun https://talonairgun.com/forums/topic/fao-of-ed-regarding-beech-stocks-on-edguns/page/4/#post-225711 Sat, 02 May 2015 14:06:18 -0400 quote Hemn:Brother ,,,,you Edgun stocks have different shape on the pistol grips ,,, if you compare to the current Edgun stock shape ….

BTW: very nice stocks ,,,, you are lucky…

quote Demp223:Both mine are walnut. I modded them so I definitely can guarantee the wood type. Seen 3 others besides mine and all walnut.

I modified both grips…Read more

]]> c474b4e81125d73ca363d590f4fb9e7e demp223 replied to the topic accuracy problem Edgun Matador R3M 25 in the forum EdGun https://talonairgun.com/forums/topic/accuracy-problem-edgun-matador-r3m-25/#post-225523 Thu, 30 Apr 2015 05:02:06 -0400 I clean my barrel rougjly between 3-5k shots. Usually just run a dozen or so Balistol coated pellets down the barrel every few hundred pellets to keep cleaning to maybe two patches. Then again mine is well seasoned with over 100k pellets down its barrel.
Take time to learn how to shoot it. The 25 does jump more when fired , it’s every bit as…Read more

]]> e2316285ad6301382a2feae9bfdda841 demp223 replied to the topic Optimum velocity for JSB Kings 25.4grn pellets in the forum EdGun https://talonairgun.com/forums/topic/optimum-velocity-for-jsb-kings-25-4grn-pellets/#post-225521 Thu, 30 Apr 2015 04:44:49 -0400 In my 25 long version I’m set at 940fps. MOA at 150 yds with great regularity if I’m up to task on trigger, which I usually am. :biggrinn:

]]> d58d121c1d62c30215c7e757b6ceacd7 demp223 replied to the topic Fao of ed regarding beech stocks on edguns in the forum EdGun https://talonairgun.com/forums/topic/fao-of-ed-regarding-beech-stocks-on-edguns/page/3/#post-224942 Tue, 21 Apr 2015 21:33:37 -0400 Both mine are walnut. I modded them so I definitely can guarantee the wood type. Seen 3 others besides mine and all walnut.

]]> 6f02fc7924677d146b4dcfbac401d588 demp223 replied to the topic New Edgun Matador owner*update* in the forum EdGun https://talonairgun.com/forums/topic/new-edgun-matador-owner-update/#post-224605 Thu, 16 Apr 2015 18:11:00 -0400 Welcome. Shoot the crap out of it and learn everything about it before tinkering with it.

]]> c37e89d63d3d3eb8820c3d02273a2c9f demp223 replied to the topic Just a Tip in the forum EdGun https://talonairgun.com/forums/topic/just-a-tip/page/2/#post-224604 Thu, 16 Apr 2015 18:04:33 -0400 just a bit of silicone grease on orings and light coating of Ballistol on the washers. Still running original orings in both rifles and ES is still around 9fps with SD of 2.33 on both Eds.
Well over 100k pellets on 22 and close to 40k on 25.

]]> da68558e30ee80daeebc28e749304903 demp223 replied to the topic chairgun help please in the forum EdGun https://talonairgun.com/forums/topic/chairgun-help-please/page/2/#post-222427 Sat, 21 Mar 2015 03:45:12 -0400 Chairgun is perfectly accurate when you input the correct info.
Chrony your pellet at muzzle and at 100 to get your BC.
Mine is spot on out to 200 on both my Eds and scopes.

]]> 344abf103491c7f038f788ee50888d51 demp223 replied to the topic What Happened??? in the forum BullPup General Chat https://talonairgun.com/forums/topic/what-happened-d23/#post-221030 Thu, 05 Mar 2015 23:35:54 -0400 Hevent been over there since I got blocked for ?????????
The pansie owner Steve never responded as to why my account was blocked from posting.
I figure being I only had positive experiences with my Edguns and Ed himself he took it upon himself to see I could never relay that info to anyone else in his forum.

]]> 19390b7425371adb7bc0615c959e4305 demp223 replied to the topic I been challenged to a shoot out in the forum BullPup General Chat https://talonairgun.com/forums/topic/i-been-challenged-to-a-shoot-out/#post-219076 Mon, 09 Feb 2015 18:38:38 -0400 Yep. Friends kept saying there is no way I could consistently hit shotgun shells at 100 yds with my Edgun 22 as I claimed.
Challenged them to bring their 22lr and 223s and see who get get the most out of 10 shells and each hit had to be all she’ll only. No knockdowns for hitting wood below it.
3 rounds of ten shells. I went 8-10, 9-10, 7-10.…Read more

]]> 771955db8563458a27830c6435954162 demp223 replied to the topic R3M .25 Shots on Valve Stem in the forum EdGun https://talonairgun.com/forums/topic/r3m-25-shots-on-valve-stem/#post-218814 Thu, 05 Feb 2015 20:52:43 -0400 I don’t see why not if you keep things in good shape like I do.

]]> deefd906aaac798bfebe70ab91983cfa demp223 replied to the topic Ed, about your barrel specifications in the forum EdGun https://talonairgun.com/forums/topic/ed-about-your-barrel-specifications/page/2/#post-218813 Thu, 05 Feb 2015 20:35:49 -0400 quote shooter3:That MOA accuracy in 10 shots with LW barrel and 16 gr JSBs was achieved in JSB factory testing tunnel:
http://www.fieldtarget.cz/clanky/ostatni/testy-diabolek-prosinec-2014.html

quote Demp223:The 16 is a very good substitute for the 18 if you shoot in very low to no wind areas. I believe a few indoor 100 meter tournaments have…Read more

]]> 6a949cc35f26b68252896f7b4c831677 demp223 replied to the topic Ed, about your barrel specifications in the forum EdGun https://talonairgun.com/forums/topic/ed-about-your-barrel-specifications/page/2/#post-218750 Wed, 04 Feb 2015 17:30:39 -0400 All tests were with my Edgun 22 long.
As I said earlier, if you want to increase speed above 880 Fps for the JSB 18 and still get regular MOA groups at 100 or farther you will need to have more matched pellets to your barrel. The higher speeds start to really show the pellets inconsistencies at around 100 and beyond. A simple test is tune it up…Read more

]]> da3a2065960eff41302a541e265f2ae0 demp223 replied to the topic Pellet of Choice in the forum EdGun https://talonairgun.com/forums/topic/pellet-of-choice/#post-218731 Wed, 04 Feb 2015 08:37:52 -0400 With appx 100k shots on my 25 long the preferred pellet is the JSB 25 or its twin Air Arms 25 pellet at 940 Fps in my long.
MOA at 100 yds is consistent even approaching 1000fps. However when pushing out to 150 and 200 I found that 940 was best for achieving MOA with some normalcy.

]]> ee6350badcb4cc4995ffd6d255958383 demp223 replied to the topic R3M .25 Shots on Valve Stem in the forum EdGun https://talonairgun.com/forums/topic/r3m-25-shots-on-valve-stem/#post-218730 Wed, 04 Feb 2015 08:22:28 -0400 Yes. Thurough cleaning of every component and clean/Lube all orings.
I use my rifles in all kinds of weather and conditions so a good cleaning is necessary.
Appx every 200 shots I run a few coated with Balistol through and a single patch every once in a while just to check and its usually fairly clean.
I do a better patch run every few…Read more

]]> 93e1201552a4edccbf70a1576605da33 demp223 replied to the topic Ed, about your barrel specifications in the forum EdGun https://talonairgun.com/forums/topic/ed-about-your-barrel-specifications/page/2/#post-218729 Wed, 04 Feb 2015 08:01:58 -0400 quote shooter3:quote Wingman NZ:He chose the 18gr pellet over the 16gr that he previously recommended for the Edgun R2’s as they were not only heavier but have a higher B.C meaning better ballistics for longer ranges and more suitable for a faster twist rate with its weight and balance/length compared to the 16gr that does best in the std L/W…Read more

]]> c2b975ba8f871826742c5c2bf4c6d770 demp223 replied to the topic R3M .25 Shots on Valve Stem in the forum EdGun https://talonairgun.com/forums/topic/r3m-25-shots-on-valve-stem/#post-218576 Mon, 02 Feb 2015 18:23:46 -0400 I’ve got around 100k on mine at 940 Fps with JSB 25s.
It was converted from SS to multi shot appx 20k pellets ago.
I’ve got 5 replacement stems and a big bag of orings for both rifles.
Haven’t had to use either due to regular maintanece and lube. Lube breech oring every few thousand and whole rifle tear down every 10k appx.

]]> bba609a6b31297469bae23dd18cac264 demp223 replied to the topic Ed, about your barrel specifications in the forum EdGun https://talonairgun.com/forums/topic/ed-about-your-barrel-specifications/#post-218574 Mon, 02 Feb 2015 18:15:35 -0400 While I don’t know Eds exact barrel specifics I will give you my test results which others found similar and thus why the recommended 880-890 Fps range.
To date I have close to 140k pellets through my 22 ( still original orings FYI). Over 100k were with JSB 18s then after getting 25 cal I detuned the 22 cal to 20fpfe with JSB 13s for field…Read more

]]> 24897bd230e64181fe4534540e6fa6e4 demp223 replied to the topic Air guns and the weather in the forum BullPup General Chat https://talonairgun.com/forums/topic/air-guns-and-the-weather/#post-218512 Sun, 01 Feb 2015 23:23:30 -0400 Having shot from 115 down to -25 below as well as sea level to 7000 feet I can firmly attest that they both affect POI.
However only vertically once rifle acclimated. Going from warm house of 68 to low teens will show up to 1/4″ horizontal shift at 50 as everything cools then slowly settles back to just a horizontal drop in both my Eds.…Read more

]]> 1f75ca71bf5787ebc773dd539fa70fe9 demp223 replied to the topic EDgun in action...(Airgun Winter Gray squirrel Hunt) video in the forum EdGun https://talonairgun.com/forums/topic/edgun-in-action-airgun-winter-gray-squirrel-hunt-video/#post-216681 Tue, 06 Jan 2015 16:50:45 -0400 Great vid on a nice cool day.
What are you using to video?

]]> 5d41d465e5a2253a4de13fdab3cf5bc1 demp223 replied to the topic R3m external adjuster in the forum EdGun https://talonairgun.com/forums/topic/r3m-external-adjuster/#post-216679 Tue, 06 Jan 2015 16:37:02 -0400 Why do Criket owners like the ability to easily and constantly change the Fps of their rifles?
Set it and forget it. A consistent Fps means same poi every time you pick it up.

]]> 94dcbb608071961c605015732a6e65c2 demp223 replied to the topic Going to buy a gun need advice thanks in the forum EdGun https://talonairgun.com/forums/topic/going-to-buy-a-gun-need-advice-thanks/#post-216652 Tue, 06 Jan 2015 03:53:27 -0400 I’ve got over 80k shots on my Edgun 22 long and over 35k though the 25 long.
Both original prongs and valves. Regular Maintanance and exceptional MOA accuracy make for much loved air rifles.

]]> 8b60b104dc4d502036143f4b6fc5bfa6 demp223 replied to the topic Edgun Matador .25: standard or long? in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-25-standard-or-long/#post-209358 Sat, 23 Aug 2014 03:12:12 -0400 Yes. The rear section is longer to match barrel and thus more volume to muffle sound.

]]> 8d9b7b2e40486bf4e4c8900e6650866b demp223 replied to the topic JSB kings and AA pellets- there is a difference.. in the forum BullPup General Chat https://talonairgun.com/forums/topic/jsb-kings-and-aa-pellets-there-is-a-difference/#post-209353 Sat, 23 Aug 2014 01:56:19 -0400 both shoot same poi out to 200yds at 940fps so it doesnt make a bit of difference to me 😀 😀

]]> b8684ce62bdfaa6893579de6f8f71470 demp223 replied to the topic For that Accurate shot in the forum BullPup General Chat https://talonairgun.com/forums/topic/for-that-accurate-shot/#post-209352 Sat, 23 Aug 2014 01:50:26 -0400 With proper training you can significantly reduce the need for all the electronic gizmos. Life is much simpler and quicker when you use the ultimate computer=the human mind. Plus its doesnt need a power outlet after so many hours and is weather resistant :2cents:

]]> 1832c2407ede5de603b6c7f5b325caa2 demp223 replied to the topic Got my Multi-Shot Kit in the forum EdGun https://talonairgun.com/forums/topic/got-my-multi-shot-kit/page/3/#post-209346 Sat, 23 Aug 2014 01:18:28 -0400 Shots were everywhere. Lots of chrony strings,target practice,plinking, and hunting. I probably pumped appx 20k worth of pellets with my Hill pump to pass time at night. Figure an average of 100 shots per charge between two guns=200 pump sessions. 😀 . Im no Arnie by any means but plenty strong and stocky from sports,work,working out and active…Read more

]]> 3bbdd85ebc3d7a687f2419b782e53444 demp223 replied to the topic Edgun Matador .25: standard or long? in the forum EdGun https://talonairgun.com/forums/topic/edgun-matador-25-standard-or-long/#post-209344 Sat, 23 Aug 2014 00:58:53 -0400 Im 5-10, 220 and carry a long 25 comfortably all day,sun up to sun down. Both are incredibly accurate. Long will be quieter with more shot count.

]]> 2ad53289ce7fccd46f6a13d0d16cebe1 demp223 replied to the topic Can R3m .22 std be set to 12 ft/lbs for backyard plinking? in the forum EdGun https://talonairgun.com/forums/topic/can-r3m-22-std-be-set-to-12-ft-lbs-for-backyard-plinking/#post-209290 Fri, 22 Aug 2014 02:39:46 -0400 I’ve got my 22 tuned to 20fpe with 13.43jsb. Still wicked accurate out to 100yds, very high shot count and much quieter.

]]> 81cad5fbfa70a47bce17c18443d3c58d demp223 replied to the topic Just got an R3M, it's a thing! in the forum EdGun https://talonairgun.com/forums/topic/just-got-an-r3m-it-s-a-thing/#post-207670 Thu, 31 Jul 2014 06:44:06 -0400 I’ve got mine shooting at 940 fps with the JSB 25s.found that to be optimum fps for accuracy out to 250yds. Up to 100 yds even 1000fps produced golf ball size groups regularly.
72 regulated shots with a 2.33 SD and max spread of 9fps.
If I open up SD and spread a slight bit I could claim 76 regulated shots but I stop count right where I see the…Read more

]]> 1bae51e276a4ca0d22658681126361d8 demp223 replied to the topic Got my Multi-Shot Kit in the forum EdGun https://talonairgun.com/forums/topic/got-my-multi-shot-kit/page/3/#post-207669 Thu, 31 Jul 2014 06:33:20 -0400 Hard to pass up the savings. Considering I’ve already shot over 100k pellets that’s appx 10k free.
I’ve got easily another 80k of 22 and 25 sitting on the shelf. I haven’t been shooting much as I’ve been busy growing my business here in Montana and exploring Glacier National Park.

]]>