Good luck with that. Last time I checked aluminum is not magnetic. … :rofl:

Haven’t really had a fwd lever gun… had the Vulcan and found it awkward to cock… not really a fan

They shoot like shit.

The 18.1s will shoot 960s with the regulator adjusted properly.

No need for hammer spring.

Set your reg pressure at 150 bar and I’m betting you’ll see 900 fps….

Accuracy is another thing…

Pull the regulator out the tube(Will only come out the valve end as there is a shoulder inside that don’t let the regulator shift forward)

To adjust the pressure you loosen the tiny grub screw on the side of the top cap (it has a screen) then turn it to adjust accordingly.

I would strongly suggest ordering a nylon tipped…Read more

I will try to reach out to tomorrow but in the meantime if anyone has suggestions or pics let hit me up.

Regards,

DT

Here is a quote from dimitry…

” The new reducer disc springs are pre-compressed state. This increases the life of three times. Inside…Read more

I did this one with a…Read more

Most everything is the same except the breach and mag…

I haven’t torn down a vet yet so I don’t know if it’s the same as the late mutant. I’ll see if I can get a schematic of the veteran.

You would probably gain a solid 35 – 40 shots…

or a small suction cup would work too like one from a radar detector mount….

:hoot:

I wouldn’t suggest any major invasive “mods” to the Mutant. Any gains to be had are not all that significant.…Read more

what do you think about this “new” SALES CHANNEL?

personally i think you cant trust the guy.
:rofl:

but thats me. He does promote airgunning. But it is pure business man.

Yup….

That is the path, guess AOA needed a new Face.

But what are the chance of retrofit MK1 to the bigger(MK2) size air tube? I am VERY happy with my .22 standard, just like even more shot count.

thanks,

Not sure where everyone gets this mk1 mk2 stuff… but it’s gonna be called the mutant Veteran.
I don’t believe the airtube is any bigger…Read more

So it appears they are right in the ballpark they need to be with a short .25 caliber. I’m sure there is some power left on the table.. at the cost of air consumption.

From what im told cz does not like to provide barrels to company’s outside the CZECH REPUBLIC…. Tamaun had to source there cz barrel from 3rd parties..

Anyhow the VETERAN will be sporting a LW pipe

Here is a little eye candy while we wait.

The new regulator is pretty impressive looking…

You don’t know the name of the company who makes the Mutant :whistle: you wonder why you don’t see it on the exhibitors list for IWA 2017 :whistle: :whistle: :whistle:

The name is “Tamaun”. I…Read more

Its really hard to compare the 2….. there is a few things give the cricket more shots…

First the Airtube is larger. i believe it is around 200cc

2nd the…Read more

How many of you would buy a .25 shorty?

Was interested… but don’t seem to be much good info out there about these.

Where are all…Read more

The wood seem to be pretty decent, the finish is lacking a luster.

The Mags are similar to that of an MROD or FX style. they seem to be wound…Read more

Got me a .25 walnut :biggrinn:

40 MOA is a lot of Drop :whistle:

Still no dates… I’m not gonna even speculate.

So far what I know the standard .25 will be 700 mm long and the long will be 800 mm.

At this time a shorty won’t be offered. (They don’t feel there will be much demand …)

They have a few working prototypes … the anti double load is working great.…Read more

Its probably best to change the endcap on the moderator that way you don’t use excess adapters …. that would keep everything straight.

Do people actually swap out an edgun regulator for one of them humas? i would think that would a be a step back..

Edgun regulators have always been simply great amazing :biggrinn:

I asked his source, this was his reply


Someone posted about it here a while ago and posted a link to a YouTube clip of the guy who was meant to be the original designer. I honestly have no idea how reliable the source was.

I remember that the g…Read more

:8:

It might well be true but it’s the same message that we’ve been hearing for a long time and it hasn’t been followed by anything from the actual company, or any of the stores that import and sell the Mutant. I hear too much bs from 3rd hand sources to pay any attention anymore.

The one video that was…Read more

It was so slow to refresh that it drove me nuts… In order to shoot a good string it would take hours cause it would take like 10 sec or so to refresh.

I put a lane in it and got a 3 fps spread across 50 shots… as fast as i could shoot it.

Lane…Read more

But If it were me… Id just pull the Regulator break it down clean it out. Change out all the Orings, ( replace the 2 on the rotor with proper eurothane Orings) While your at it I would swap out the small grub screw on the adjuster cap for one that has a nylon tip.

put a light lube on the belleville washers…Read more

I’ve got a few different regulators kicking around… I’m getting closers and closer to ordering…Read more

These look like some nice rigs for the $$$ … I’m contemplating ordering a .25 in black with the nickel color

Yeh the same guy that says he’s got the best prices and won’t be beat….. :rofl:

They had a 300 mm barrel, and used a adapter at the end of the barrel that doubled as a bushing (the Korean barrels were 14mm).

Since the barrel clamps were designed for the 15mm barrel they didn’t need a bushing anymore so it was one less part to make ..

When they…Read more

that is because it is….

Some people prey on those that don’t know any better

the base model appears to be $3,095.00

And here are the prices over the pond… http://eu.komptec.com/index.php?main_page=index&cPath=2 overseas they are half the price.. €1,553.78

Good thing there is better c…Read more

Now seeing that the gun is somewhere around 1200$ ?? and it seems the trigger could use some help and there is other things going on… ( regulator ??)

Couple that with a shooter … ( how are your 100 yard groups with other…Read more