Talonairgun | doorns | Activity https://talonairgunforum.com/members/doorns/activity/ Activity feed for doorns. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 5de5ae12a11e4cfaf691c13daddfe3b7 doorns replied to the topic Vulcan .22 100yard group in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-22-100yard-group/#post-266770 Wed, 01 Mar 2017 08:20:30 -0400 quote shooter3:How does the choke behave after 20 shots? It is leaded? I also noticed that the crown is not perfect. The lands are not cut off sharply. They look blunt.

The lands edges should look like that:

http://up.programosy.pl/foto/img-20170123-wa0004.jpg

Trapezoid shape.

Hi Shooter.
Yes, the barrel was leaded.

That picture of the…Read more

]]> 6a149551a9416877fe1e303dac8ba924 doorns replied to the topic Vulcan .22 100yard group in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-22-100yard-group/#post-266477 Mon, 20 Feb 2017 17:11:00 -0400 Hi Kris.
Thanks for the massive reply!
Cricket was not super accurate at 50m, but it held its group much better at 100m and further. Zero flyers, all within a nice, round group (always under 4cm for 12 shots)
I can rule the wind out, there was nothing blowing with the 100yard groups.
Reagrding scope setup, my cheek weld is really good, and I check…Read more

]]> c2d1529246626146bc8c122721aa09a2 doorns replied to the topic Vulcan .22 100yard group in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-22-100yard-group/#post-266469 Mon, 20 Feb 2017 05:41:11 -0400 I also shot a whole magazine into a pool at 40m to see if any of the pellets have damage to them. Even with a magnifying glass I could not see any imperfections on the pellet. I did however see that the choke is quite strong and reformed the pelletskirt quite a bit, dont know how normal that is.

]]> 9801aff57deda61ffc69be8127e2a0b7 doorns replied to the topic Vulcan .22 100yard group in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-22-100yard-group/#post-266455 Sun, 19 Feb 2017 20:44:32 -0400 Yes, I have double and triple checked all the bolts.
Here is a really bad photo of the choke. It really is flawless.
I really don’t understand what it could be. With constant velocities and a (what looks like) good barrel the gun should shoot well.

]]> 3ea633c6dc668ede7868452ae422da33 doorns replied to the topic Vulcan .22 100yard group in the forum Airgun Technology https://talonairgun.com/forums/topic/vulcan-22-100yard-group/#post-266453 Sun, 19 Feb 2017 19:45:18 -0400 quote guykuo:Yes, it should be doing better than that.

Before returning the gun, I would at least try it with Air Arms Diabolo Field .22 Cal, 5.51mm, 16 Grains, Domed pellets.

Test at 850, 900, 920 FPS.

My Vulcan 22 really likes those.

I have never seen the 16gr AA pellets over here… but thanks for the info, will try and get…Read more

]]> 89df4353d0e2593cbb06636df7d1b442 doorns replied to the topic Should I buy this brand new Colibri? (pic) in the forum BullPup General Chat https://talonairgun.com/forums/topic/should-i-buy-this-brand-new-colibri-pic/#post-263577 Fri, 23 Dec 2016 17:23:10 -0400 Kalibrgun posted some CAD pics on instagram of a bullpup that could be the colibri replacement. The wait might be over soon! :8:

]]> a5d5ba1d6999d3fb797a88875f825533 doorns replied to the topic Lol in the forum BullPup General Chat https://talonairgun.com/forums/topic/lol-d43/page/3/#post-261739 Mon, 21 Nov 2016 09:00:13 -0400 Looks like somebody hacked Cricket’s account. Probably a FX fanboy from AGN.

]]> d5add2c0d934610c379d400cf7da2efa doorns replied to the topic So how much does TED Holdover Youtube account make? in the forum BullPup General Chat https://talonairgun.com/forums/topic/so-how-much-does-ted-holdover-youtube-account-make/#post-258404 Sat, 10 Sep 2016 10:00:56 -0400 quote birdman:The one thing that most of us know is that Ted truly loves air guns . What we think of him and if he is really a bias paid promoter
of a certain air gun product that pays him well we really do not know because no one has ever seen a check endorsed from anyone
to him to be cashed . So , If Ted is a…Read more

]]> 9cdcec173a029c4589c2654afed75f93 doorns replied to the topic Matador R4 in the forum EdGun https://talonairgun.com/forums/topic/matador-r4/page/3/#post-256501 Wed, 20 Jul 2016 17:23:15 -0400 Personally I think these prices are rediculous for anyone living outside of Eastern Europe or USA.
Air rifles here (South Africa) are insanely expensive, but firearms aren’t. I paid under $2100 for a Sako 85 .243 African hunter and Savage laminated .22 less than 2 months ago (both brand new)
But a FX impact .22 costs like $2850, AA S510 $1800 ect…Read more

]]> 12eaef10a5977d4daf8f52c1653e244c doorns replied to the topic Edgun advice please in the forum EdGun https://talonairgun.com/forums/topic/edgun-advice-please/#post-256149 Wed, 13 Jul 2016 12:26:43 -0400 My friend, think everybody here will agree, Patchworm is one of the best (if not the best) way to clean an airgun barrel.
What solvent do use on the patch?
Ballistol and Boretech Eliminator are a couple that I have found work well.

]]> 2d01e3c687dc27b5feb3a5b5f6f5d9ba doorns replied to the topic The fanciest bullpup? in the forum BullPup General Chat https://talonairgun.com/forums/topic/the-fanciest-bullpup/#post-255607 Tue, 28 Jun 2016 04:29:47 -0400 quote ElmerFudd:I’ve also seen some with premium scopes on their airguns too that powder burners would envy.

*Cough cough* Parrots with his Vortex Razor

]]> 6d9184fa8e56e7c729a2987a7c8475f3 doorns replied to the topic Edgun Chronograph in the forum EdGun https://talonairgun.com/forums/topic/edgun-chronograph/#post-255022 Wed, 15 Jun 2016 12:27:35 -0400 I heard it costs €100 shipping not included (+-€30)

]]> 4734a0d228ee62ac16be24b694230487 doorns replied to the topic Air Arms S500 in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-s500/#post-254340 Fri, 03 Jun 2016 15:38:46 -0400 Hi guys.
Okay I need your help… after changing all the orings on the gun and loosening the shroud to clean the barrel I now have a problem…
The pellets dont leave the shroud when shooting. They definatly leave the barrel (I took the shroud off) but they get held up somewhere in there.

Also the barrel sound like it is loose in there when the…Read more

]]> 3337366123eff0236cd14a23da247cdc doorns replied to the topic Regulator spacer. in the forum Kalibrgun https://talonairgun.com/forums/topic/regulator-spacer/#post-253086 Sat, 14 May 2016 15:24:28 -0400 It can’t be made any longer. That is why Ernest and I think Jan drilled holes through the spacer. That is the only (known) way of increasing the regulated air volume.
Greg, you could probably figure something out if you put your mind to it.

]]> 1d4cb69803a1fe4f4d3b771e2bdfab42 doorns replied to the topic Regulator spacer. in the forum Kalibrgun https://talonairgun.com/forums/topic/regulator-spacer/#post-253076 Sat, 14 May 2016 13:56:47 -0400 I found it!!
Thanks anyways guys :8:

]]> b93c14265fe09147fb59ffc0524bfc02 doorns replied to the topic Best Hand pump?? in the forum BullPup General Chat https://talonairgun.com/forums/topic/best-hand-pump/#post-252144 Sat, 30 Apr 2016 11:55:43 -0400 I have a hill mk4 pump.
It works like a charm. Although it is quite pricey, you really get the feeling of quality.

]]> 7e6c6b9dac0f13c544b0307ad57e8244 doorns replied to the topic I want to set up my gun for hunting in the forum BullPup General Chat https://talonairgun.com/forums/topic/i-want-to-set-up-my-gun-for-hunting/page/2/#post-250797 Tue, 12 Apr 2016 12:59:42 -0400 I agree that fixed magnificaion is by far the best for hunting. It’s simple and it works, unfortunatley SWFA does not ship outside the US. So it is a lot of effort to get one when you are anywhere else. Edgun is a good option as well, but shipping can kill you from him. The shipping company he uses quoted me €600 to ship a R3M to me… tried a…Read more

]]> d1d2b41dd7586b5aa34725cb8f18a676 doorns replied to the topic Edgun VS American crow in the forum EdGun https://talonairgun.com/forums/topic/edgun-vs-american-crow/page/2/#post-250525 Thu, 07 Apr 2016 16:35:17 -0400 Well about a year ago I went on vacation to a place that has hundereds of crows. I was there with my edgun R3 .22 I shot 3 out of 3 crows all over 80m and each one dropped like a stone. A few weeks ago I was at that spot again. I was shooting with my cricket .25. I did not even drop 1… hit 6 of them (all over 90m) but none of them went down. Yes…Read more

]]> cb738003b808a7d6ecf639ee586f65a8 doorns replied to the topic Cutting Barrels, Tips and Rules in the forum BullPup General Chat https://talonairgun.com/forums/topic/cutting-barrels-tips-and-rules/#post-250323 Tue, 05 Apr 2016 09:00:31 -0400 I think a gunsmith or talented maschinist with a lathe will be able to do it.
Measure multiple times where you want to cut. Cut the barrel on the lathe, cut a crown, maschine nessasary thread or part for shroud.
Although I have never done it before, it doesn’t sound too complicated. What cutting implements and speeds should be used on the lathe I…Read more

]]> caaeb6e24bcbcc262baa4ecf45338d74 doorns replied to the topic Hot Rod cricket .25 custom slug gun in the forum Kalibrgun https://talonairgun.com/forums/topic/hot-rod-cricket-25-custom-slug-gun/#post-250321 Tue, 05 Apr 2016 08:09:51 -0400 Hemn you are 100% correct.
I bought some 58gr .25 slugs from AfricanAirOrdnance. Firstly they dont fit the mag, becauae they are 13mm long. Secondly, they did not leave the barrel. They got stuck halfway out. My gun shooting kings at 271m/s, the choke is just too strong.
If you want to shoot slugs, buy a cricket and have the choke cut off. I…Read more

]]> a063a469c1697f347527b4de3996fa89 doorns replied to the topic Reg piston o-ring in the forum Kalibrgun https://talonairgun.com/forums/topic/reg-piston-o-ring/#post-249982 Wed, 30 Mar 2016 17:23:12 -0400 In my small town I am super thankfull when I find tge correct size. Nevermind the “correct” density :3: :biggrinn:

I doubt that even the hardest oring would not seal perfectly (when lubed with silicone grease). Should get some intersting replies :8:

]]> 73ad328e6376464bd7c5a48b578ef490 doorns replied to the topic My Cricket Standard WST cal.22 in the forum Kalibrgun https://talonairgun.com/forums/topic/my-cricket-standard-wst-cal-22/page/27/#post-249747 Thu, 24 Mar 2016 18:03:55 -0400 Shooter, I am going to take your challenge on tomorrow morning. 65 shots, 50m (outdoor) with a small sandbag as a front rest and a folded towel as a rear rest. In the prone position.
I am not a great shot, but it is going to be fun to see what I can do. :8:
Hopefully it doesn’t rain.

]]> ca5d083932e513a7d2111d7e7fde615a doorns replied to the topic Cricket Shorty! - Kalibrgun Cricket Compact .22 in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-shorty-kalibrgun-cricket-compact-22/page/2/#post-248937 Wed, 16 Mar 2016 17:11:09 -0400 Awesome gun Cricket. The area you are shooting in looks so peaceful, nobody bothering you. You can just enjoy your new gun (which looks great btw) and focus on putting pellet on pellet 🙂

]]> 77b6f9ea6127470e2efc47ba07cbf135 doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/9/#post-248220 Wed, 09 Mar 2016 14:05:30 -0400 Recieved my Patchworms today!!
What a great product! it is so simple but it does the job so well.
Thanks for the recommendation guys, really appreciate it. :biggrinn:
My cricket is holding air again after replacing all orings :4:

]]> aef330acaaf351fe31e3c5eb86386578 doorns replied to the topic Colibri or other new guns at IWA? in the forum Kalibrgun https://talonairgun.com/forums/topic/colibri-or-other-new-guns-at-iwa/page/2/#post-248152 Tue, 08 Mar 2016 18:30:19 -0400 The design of the Colibri just draws me in. I absolutely adore it. My cricket is nice and all, but it doesn’t have that “little bit of magic”. The Impact, Colibri, Vulcan and Mutant Short are the only bullpups that are really special. All for totally different reasons of course, but none of them perfect unfortunately… Not yet, but hopefully…Read more

]]> f5234404b7d9359b270914b26315fbe9 doorns replied to the topic When those (2016) New Edgun Models Coming in the forum EdGun https://talonairgun.com/forums/topic/when-those-2016-new-edgun-models-coming/#post-248123 Tue, 08 Mar 2016 12:53:23 -0400 In a thread a few months back Ed said that the new R4 will have a longer barrel and possibly be unchoked. I am pretty sure that is what he is referring to.
Airgunwhore, have you contacted Hagan to get your new valve? We are all aware that ED fucked up with the R3 .30 valve, but now there is a fix that wont cost you much and it is KNOWN to be a…Read more

]]> 57f85c65c257899384811bd827f9e776 doorns replied to the topic New Edgun models! in the forum EdGun https://talonairgun.com/forums/topic/new-edgun-models/page/3/#post-247681 Fri, 04 Mar 2016 15:20:32 -0400 quote ElmerFudd:The reservoir on the Leshiy is tiny and half that of the Lelya 2.0 however the shot counts are about the same. I’m curious what speed/FPE those shot counts are measured at.

Thanks for posting this info Hemn but the weight with scope is kind of pointless (no fault of yours of course). Hopefully Ed will chime in and we can get…Read more

]]> dd6b3edecfffc7fb53b49b07719d212f doorns replied to the topic New Edgun models! in the forum EdGun https://talonairgun.com/forums/topic/new-edgun-models/page/3/#post-247680 Fri, 04 Mar 2016 15:14:39 -0400 Interesting that Ed now lists the working pressure from 300bar.
I really like the Lelya with multishot and that massive blocky moderator. Stealth is important to me and the shear size of that thing looks like it can get the job done. What is the AT volume of the current Lelya?

]]> 6674a8e2de84898cb73da00becd6ed1c doorns replied to the topic New Edgun models! in the forum EdGun https://talonairgun.com/forums/topic/new-edgun-models/page/2/#post-247594 Thu, 03 Mar 2016 18:01:52 -0400 a few crappy photos.Attachments:

]]> 47a4ad18331280ab4534da3a2864fa51 doorns replied to the topic IMPACT GEN II ? in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-gen-ii/#post-247569 Thu, 03 Mar 2016 13:26:56 -0400 Although I have never shot or even held a FX airgun, I can say that the exterior design of the Impact is by far my favorite of any airgun on the market right now. I especially like the CF bottle.
I absolutely agree with some people that it is best to buy one caliber only.

]]> 31403ce5d165a85200002884808b4b19 doorns replied to the topic Mutant picture thread! in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/mutant-picture-thread/#post-247472 Wed, 02 Mar 2016 17:44:37 -0400 Be careful when you use the term “eye candy”, you never know what can pop up. Especially with Leadbetter and Zonk around… Not that I am complaining though. :biggrinn:

]]> 2f6387eb3cbf2000315921f44bcde625 doorns replied to the topic NEW ATLAS BIPOD! in the forum BullPup General Chat https://talonairgun.com/forums/topic/new-atlas-bipod/#post-247315 Mon, 29 Feb 2016 18:13:27 -0400 That looks awesome! Probably just my imagination, but it looks like it will be much more stable than a conventional bipod. Especially with the adjustable leg angle. It will probably cost as much as a Taipan Short though. :angrymob:

]]> 724980963e0d9f68304ea367c1b9b770 doorns replied to the topic Once you go Baby Short in the forum Taipan Air Rifles https://talonairgun.com/forums/topic/once-you-go-baby-short/#post-247153 Sat, 27 Feb 2016 13:34:45 -0400 I have been looking at a new pcp for a bit now, and I dont want something similar to my cricket .25. I either want something compact, lightweight and in .20 or .22 (exactly like a mutant short) or an air hog like a Flex .30 or Slayer .30 regulated (when they come out)
The problem is I cant make my mind up… I dont have a specific job that I need…Read more

]]> e717b94a9b265704d01d2f6b192ec734 doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/9/#post-247146 Sat, 27 Feb 2016 08:15:36 -0400 Thanks so much Cricket.
I have been struggling for more than a week to find the correct sizes… Hopefully she will be up and running soon.

]]> bc96e36ac514cc4c2ebdba4be3b46b31 doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/9/#post-247137 Sat, 27 Feb 2016 07:33:05 -0400 hi guys. does anybody have a full O-ring list for the Cricket? Mine is leaking out of the first AND second “tell-tale’ hole in the AT. Losing 30BAR a week. :sadn: if the list can be in metric form it will be even better :whistle:

]]> d506a6f4f4e4d95fcb1cda2ac3de7041 doorns replied to the topic New format in the forum Off Topic https://talonairgun.com/forums/topic/new-format/#post-246912 Wed, 24 Feb 2016 15:03:49 -0400 I never realized how much I was on this forum until it was down. Now that it is back up I feel like I met a friend from years ago who is not at all like I remember him.

]]> 53e11ce395f83d29f0977df5b5174e53 doorns replied to the topic Air Arms S500 in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-s500/#post-246397 Tue, 16 Feb 2016 16:51:27 -0400 She arrived today! All I can say is wow. The stock is by far the most beautiful I have seen on ANY gun (in real life). There is checkering (more like engraving) in the for end and pistol grip that amazes me. The side lever is WAY smoother than my Cricket and my Daystate Wolverine (sold). I hope the performance meets my expectations.
I rather…Read more

]]> 337e4111d3e54d504eb20a28bce688aa doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/9/#post-246206 Sun, 14 Feb 2016 08:12:47 -0400 Spinj, I feel like there is something on your mind other than bb guns. Looking forward to valentines day are you? :2:

]]> 911ed4b4c166b45f8a1deb6e1fd9ebaa doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/9/#post-246169 Sat, 13 Feb 2016 21:57:53 -0400 On a seroius note I think I didn’t polish enough, and I did go all the way out the crown as well.

]]> deda290f4f799e29fe29fe3031a2981a doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/9/#post-246168 Sat, 13 Feb 2016 21:54:29 -0400 :rofl: It now looks like a ST barrel, because I only polished up to the choke… Now I can toss it in the bush :rofl: :rofl:

]]> cabca490974e0e0f4fb037d0cbc8fca4 doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/8/#post-246159 Sat, 13 Feb 2016 20:32:23 -0400 I did try to plish my bore a couple of months ago, but I had NO IDEA when I had polished enough (because I did not use JB bore paste like you guys recommended, I used VFG bore paste. I did not know how the abraisivness of these two compared) . So I may or my not have polished my bore successfully. But my guess is not, because my accuracy slowly…Read more

]]> 3b4fa02a34e4b609f048db8bcef8f6c7 doorns replied to the topic Air Arms S500 in the forum Other Guns https://talonairgun.com/forums/topic/air-arms-s500/#post-246155 Sat, 13 Feb 2016 20:00:17 -0400 The Altaros regulator does not regulate a second air chamber. It simply replaces the valve spring retainer. The regulated chamer is insidie the regulator, or that is how I think it works?
I have had a few people say that I wont get more than 35 FPE. If it is true, I guess it I would fit the .22 barrel and have a awesome regulated rifle.
But I will try!

]]> 8241ad08558787ffe70e9df91c0f5950 doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/8/#post-246140 Sat, 13 Feb 2016 16:41:19 -0400 I think it is not too much effort to clean after every use. If you have a nice cleaning kit and it causes beautiful accuracy it is worth the 5 minutes of cleaning.

I have not been cleaning after every session, but I will start once I get the patchworm

]]> 70c7ef19c7e9334169b76472c572ab9a doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/8/#post-246138 Sat, 13 Feb 2016 16:13:43 -0400 Yes Ville, I did order one from their website. There is no dealer in africa so it will take two weeks to get here.
If you clean after each session, do you only use a couple of patches?

]]> ef7e3b35242c6151d8a6f9a257126aeb doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/8/#post-246133 Sat, 13 Feb 2016 15:37:30 -0400 I have been using a cleaning rod with VFG felts to clean the barrel, because every time I use a home-made pull through it either breaks or something else.
Although the cleaning rod with the felts work well, it is a pain in the neck to remove the stock and breech every time.
Is it normal to have to clean your barrel very regularly to keep the groups tight?

]]> 1f4b42cdca73fdaf2210255724a312dc doorns replied to the topic Cricket Picture Thread !! in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-picture-thread/page/18/#post-246042 Fri, 12 Feb 2016 16:06:16 -0400 Sir Ville, I agree that is the nicest stock I have seen on any cricket. It competes with the stock on the Vulcan ads :whistle:
Why did you not swap out Cricket’s stock with yours before you sent it too him? 🙄

]]> 4c788122d159db25c45e614525bdc798 doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/7/#post-246041 Fri, 12 Feb 2016 16:02:14 -0400 I will get some ballisol frrom a local gun shop. I think now I am going to be out of excuses for not hitting 10/10 starlings & dassies @ 80m. :3:

]]> 7ed8cdcd33c91fb3d5394d874c60d6b8 doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/7/#post-246040 Fri, 12 Feb 2016 15:56:51 -0400 Okay well you idiots just cost me $50… I orderd a patchworm with a fancy case and 1000 11/4″ patches directly off their website. Should arrive in the next 2 weeks. If our customs doesnt fuck it up.

]]> 86b2d554586e5eb0e84a819451023f1f doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/7/#post-246014 Fri, 12 Feb 2016 12:28:13 -0400 Yes, it is was some pretty scenery. I didn’t have my phone or camera on me, but I will take a pic next time. I have seen you guys talk about the Patchworm a lot, is it the best cleaning kit to keep the barrel in tip-top shape?

]]> fa70ad709e3ac1a64e264495d18d262e doorns replied to the topic Quick session with the cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/quick-session-with-the-cricket/page/7/#post-245985 Fri, 12 Feb 2016 05:01:43 -0400 I FINALLY got around to do some long range groups. I woke up at 05:00 to start packing. To shoot long range I have to head into the mountains and the only way to get there is by foot.
Anyways, I got set up and placed my target at 120m. I used one of the butt rests as a front rest and a folded towl as a rear rest. Shooting JSB king 25gr at 885fps…Read more

]]>