Talonairgun | drumsguns | Activity https://talonairgunforum.com/members/drumsguns/activity/ Activity feed for drumsguns. Fri, 14 Aug 2026 22:39:34 -0400 https://buddypress.org/?v= en-US 30 hourly 2 15c4730a60278e467d0377b3be585d28 drumsguns started the topic Cricket .25 losing power. in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-25-losing-power/ Thu, 17 Jun 2021 23:01:47 -0400 I have a Cricket .25 which used to get 860 FPS with JSB heavy MK2.
now all I can get is 850.
I have replaced the hammer spring from Georgia Air guns but see no improvement.
Unfortunately Charlie will no longer work on any gun not purchased from him. I respect his decision but am truly bummed that’s the new way.
I rebuilt the gun completely a y…Read more

]]> 296aa1a38a68fccfa10ab1a9c56cbfcb drumsguns replied to the topic .25 Cricket leaking air in the forum Kalibrgun https://talonairgun.com/forums/topic/25-cricket-leaking-air/#post-275407 Tue, 12 Jun 2018 15:24:10 -0400 I know that this is an older post but thought I’d put my leak story up.

Had a persistent leak, tore the gun down and replaced all o-rings three times. Was about to give up and then talked to Ernest. we did the water bath dunk of the air tube and found the leak to be from the gauge itself. Ernest sent another gauge and Voila! Leak fixed.

KP

]]> fff2cc5625f80b1fa161c6f21d23ab35 drumsguns replied to the topic Barrel pull question in the forum Kalibrgun https://talonairgun.com/forums/topic/barrel-pull-question/#post-275206 Wed, 16 May 2018 03:58:52 -0400 Thanks Greg. I’ll try 180.
I just rebuilt the gun and did a rebuild of the regulator with polishing of everything incl belville washers. Getting an extreme spread of 10 and SD of 2.
KP

]]> b11614f6ec9810cf3c6b6c0894e2bc19 drumsguns replied to the topic Barrel pull question in the forum Kalibrgun https://talonairgun.com/forums/topic/barrel-pull-question/#post-275198 Mon, 14 May 2018 21:17:52 -0400 Wow thanks for the informative reply. I guess the main thing I wanted to know was does it make that much of a difference if I use 150 bar or 180 bar? Perhaps 160 would’ve the magic number.
I did have a question about your comment about maintaining fps accross the pressure spectrum. If one sees a change what can one do to fix that?

]]> 409a2bb811698686b0300a04c614b27d drumsguns replied to the topic Pellets for 25 Cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/pellets-for-25-cricket/#post-275114 Tue, 01 May 2018 17:59:23 -0400 I have question for those who have used the Domes. They are a harder pellet owing to the antimony so I was wondering if you’ve had any lead fouling issues that other guns (Marauders) have had when going over 900 fps. I have 6-7 un-opened tins, (complete with a picture of “Pro Hunter Jim Shockey”), on the packaging, ….but I’m getting 3/8 6-shot…Read more

]]> d8f492e7ca6f05c334a61c798071b3ac drumsguns replied to the topic O-Ring specs for Cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/o-ring-specs-for-cricket/#post-275113 Tue, 01 May 2018 13:42:18 -0400 Greg, wow what a gold mine of information. Outstanding job. Much appreciated.
KP

]]> bfa026021983dac9149f98b244633ad8 drumsguns replied to the topic O-Ring specs for Cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/o-ring-specs-for-cricket/#post-275111 Tue, 01 May 2018 04:53:54 -0400 Thanks Greg….it was too easy for me to find,,,,D’Oh!
I want get o-rings for several guns so wanted to try going bulk, otherwise Charlie is the man.

KP

]]> 947f9918bc17e52a6b8120a74175ebd5 drumsguns replied to the topic Re-Aligned Barrel, Cricket .25 cal in the forum Kalibrgun https://talonairgun.com/forums/topic/re-aligned-barrel-cricket-25-cal/#post-270765 Tue, 15 Aug 2017 19:28:48 -0400 Yeah, just about a year. Reasons….
1. After tearing into and replacing o-rings soooo many times I got frustrated and put it down. I could see the leak coming out the front of the gun and thought it was the check valve o-ring, or the gauge o-ring. Many o-ring changes, polishing, different lubes,….nadda

2. It was a slow leak so I thought I can…Read more

]]> 5702f581f1ef8f450c50f986e18c6e47 drumsguns replied to the topic Re-Aligned Barrel, Cricket .25 cal in the forum Kalibrgun https://talonairgun.com/forums/topic/re-aligned-barrel-cricket-25-cal/#post-270726 Mon, 14 Aug 2017 03:48:31 -0400 Wow….I have been wrestling with the Cricket leak for some time now. Actually got frustrated and put the gun down to concentrate on the Impact. Well the Impact had to go to Ernest.
So with Ernest’s help we found the problem to be a leaky gauge. Ernest sent me a Wiha gauge and it hasn’t leaked a bit. It’s also right with my tank gauge. The old…Read more

]]> 4df1299bdd44903522ce19e5e06731ee drumsguns replied to the topic Kalibrgun Cricket .25 video in the forum Kalibrgun https://talonairgun.com/forums/topic/kalibrgun-cricket-25-video/#post-270143 Mon, 10 Jul 2017 15:47:01 -0400 I’ve had my Cricket .25 for a few years now with maybe two thousand shots through it and the level shows no sign of weakness. Overall it has been a very reliable gun. And it is very accurate.

]]> ad9622caaf825b9b68fb9d20d245cdbd drumsguns replied to the topic 75 yard 5 shot group - 25 Cricket in the forum Kalibrgun https://talonairgun.com/forums/topic/75-yard-5-shot-group-25-cricket/#post-270142 Mon, 10 Jul 2017 15:21:19 -0400 The Cricket .25 is really one of my favorite guns. So accurate and simple. Nice shooting there.
KP

]]> 1d72684ae961413ae271ed08b7e0f0d0 drumsguns replied to the topic Wood for Custom Stock in the forum Kalibrgun https://talonairgun.com/forums/topic/wood-for-custom-stock/page/2/#post-270141 Mon, 10 Jul 2017 15:19:57 -0400 Anyone know how I can get more information on Chrish616918’s post? Are those his stocks? I messaged him and got no response. Any other custom Cricket stocks out there I should look at? I’d like to get the weight down on my synth stock and the wood is just amazing.

KP

]]> 19f112d01d250ecc082c30b4e35520ca drumsguns replied to the topic Big Improvement! in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/big-improvement/#post-268667 Fri, 21 Apr 2017 14:38:07 -0400 Thanks Greg,

Just wondering. What velocity works good for this setup? I’m thinking from where I’m at to 860?

]]> e9f5aff6d3725f46c3bcf1a5f9beeb4f drumsguns replied to the topic KalibrGun Cricket - grouping in the forum Kalibrgun https://talonairgun.com/forums/topic/kalibrgun-cricket-grouping/page/4/#post-267911 Tue, 28 Mar 2017 18:40:27 -0400 I recently had my Cricket 25 completely torn down to replace o-rings. I had been waiting for the gauge removal tool which I finally got and replaced the totally worn-out o-ring, Anyway …not the story. I put it all back together but forgot to pull the barrel. I read this post and went home yesterday to do just that after work. The barrel had been…Read more

]]> 1d8ce5afb869267525118b411189056f drumsguns replied to the topic FX Impact and problems, Not me in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-impact-and-problems-not-me/page/2/#post-261930 Wed, 23 Nov 2016 18:34:25 -0400 I agree with Pippo and I know that Cricket had really bad dealings with FX. I don’t understand this. A company, especially today with all of the forums and networking out there, should know that this kind of thing will spread like wildfire. Not good or business.

Also one would think that if there are a lot of lemons being delivered to customers,…Read more

]]> 42a25a6e30fbbc43112fb9062b2d7223 drumsguns replied to the topic FX Impact and problems, Not me in the forum FX Air Rifles https://talonairgun.com/forums/topic/fx-impact-and-problems-not-me/page/2/#post-261920 Wed, 23 Nov 2016 16:04:38 -0400 Just my opinion here but if I was a manufacturer with a new product to sent to reviewers, I’d sure as hell, make sure those products get re-routed from the usual assembly line and given the loving touch before leaving the building. Of course,Ted and others got a real good one. Smart on FX’s part.

I’m a drummer (bet you didn’t see that one coming)…Read more

]]> b7ab3c518c79db6e06409229bf72d123 drumsguns replied to the topic Impact .25 Questions in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-25-questions/page/2/#post-261843 Tue, 22 Nov 2016 18:09:39 -0400 The Impact continues to break in and I’m noticing groups getting a little tighter. About 700-1000 rounds through it now. No major issues. Had to adjust the PW slack, trigger and regulator and that’s about it so far. Barrel hold down screw still loosens up but will fix that soon. Barrel gets very dirty but I think that’s break in going on. Anyway a…Read more

]]> fdaef399ef8de56a9a53e051480c066c drumsguns replied to the topic Impact .25 Questions in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-25-questions/#post-260870 Mon, 07 Nov 2016 14:23:25 -0400 I know what you’re talking about….I lived in Sweden and Denmark for 8 years. Remember it well! Hope you get a break in the weather at some point.
KP

]]> 4a38fefcb81e08fb858ce638eca919ba drumsguns replied to the topic Impact .25 Questions in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-25-questions/#post-260852 Mon, 07 Nov 2016 01:54:55 -0400 Hey Cricket,
Got back last night….first thing I did was get the Impact out and put a dab of AC-3 adhesive on the threads of the Power Wheel adjuster screw. I had trouble with changing velocities and bad groups and found that the screw was gradually backing out as I shot.The max setting had a gap that one should see at setting 3 or 2. Got out…Read more

]]> 72378d59d0691c87690b81e58eee80ac drumsguns replied to the topic Impact .25 Questions in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-25-questions/#post-260410 Sat, 29 Oct 2016 00:44:27 -0400 Elmerfudd…I might be inclined to agree with you on that but the hammer throw screw on the gen1 Marauder also backed out as did the bolt probe cocking screw. All had to be lock-tited. My Condor SS top hat also had to be lock-tited as well to prevent grub screw backout. So I’m not too worried about it. I think that the Impact will be updated with…Read more

]]> 745d22b4beb6fd8bf66f35a76c82427e drumsguns replied to the topic Impact .25 Questions in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-25-questions/#post-260336 Wed, 26 Oct 2016 20:14:51 -0400 Hey guys, I had to go out of town but right before leaving, I saw my velocities dropping. I discovered that the Power Wheel adjust screw was backing out. So when I get back I’ll re adjust and put a little VC-3 adhesive on the threads to lock. Should do the trick and tighten up some jumpy ES readings and POI shifts.

Then I’ll start going for some…Read more

]]> fb3f630bbe20c1852359fcae098922b8 drumsguns replied to the topic Impact .25 Questions in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-25-questions/#post-259924 Mon, 17 Oct 2016 18:54:15 -0400 Ginuwine, I took out the PW slack but it did nothing. So I upped the regulator from 120 to 140+bar. That did the trick. Now it shoots at 855 on PW 5 with EK Heavies.

Cricket…as per your request, a couple of pictures:Attachments:

]]> e82f2bc4b9a38f06f7b5f1f67c9593bf drumsguns replied to the topic Impact .25 Questions in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-25-questions/#post-259621 Tue, 11 Oct 2016 13:16:24 -0400 Hey Cricket,

Man, any input is welcomed. I think I’ll not mess with the regulator and assume that it’s set properly with an inaccurate gauge. There’s a reason Ernest changed his…. After thinking about things, I think that it would be perfectly fine to take the slack out of the power wheel. At factory valve setting of 4, and on MAX, that pellet…Read more

]]> f1d0e192851d32cf43e867d9740734f0 drumsguns replied to the topic Re-Aligned Barrel, Cricket .25 cal in the forum Kalibrgun https://talonairgun.com/forums/topic/re-aligned-barrel-cricket-25-cal/#post-258840 Tue, 20 Sep 2016 15:18:25 -0400 Thanks,

Sounds good and I said I’d check this and I did…a lot of o-ring lube leaking out of the rear hole closest to the breech. Guess that indicates rear cap O-ring.

Gonna try to start it tonight and see what I can see.

K

]]> 9fae3562d7a54eb9d618af901067d64e drumsguns replied to the topic Re-Aligned Barrel, Cricket .25 cal in the forum Kalibrgun https://talonairgun.com/forums/topic/re-aligned-barrel-cricket-25-cal/#post-258807 Mon, 19 Sep 2016 20:03:35 -0400 Thanks for the replies. I wanted to get into the gauge area but like you said …a special socket is needed. Ernest was out of them when I ordered o-rings.
Where would you check for leaks there with the silicon oil? I’m thinking that the “blow hole” indicates a leak at the front end cap but wherebouts for the gauge?

I’ll try to tear things down…Read more

]]> f5ae4f7027a31dcc5f119df350e433ff drumsguns replied to the topic Re-Aligned Barrel, Cricket .25 cal in the forum Kalibrgun https://talonairgun.com/forums/topic/re-aligned-barrel-cricket-25-cal/#post-258799 Mon, 19 Sep 2016 17:48:55 -0400 Hey Greg,

Nice photos…also smart move sharpening the bolt.

Well I still have leak problems….maybe you have an idea?

At first I replaced the valve end cap O-Ring. Got it back together and it still leaked. I managed to scratch the o-ring groove :angrymob: and sent a picture of it to Ernest …he thought that it didn’t look too bad. Thinking…Read more

]]> 642900d0ca11b4531713d3ad5354ce80 drumsguns replied to the topic Ted's Challenge in the forum Kalibrgun https://talonairgun.com/forums/topic/ted-s-challenge/#post-255879 Mon, 04 Jul 2016 15:47:35 -0400 I don’t sort either. Load magazines straight from the tin. I lube with Krytech but only to keep the barrel clean longer. I cleaned the barrel and shot two magazines before going for the challenge.

]]> a0461aa9525d7f33049a4234d8cea005 drumsguns replied to the topic Ted's Challenge in the forum Kalibrgun https://talonairgun.com/forums/topic/ted-s-challenge/#post-255855 Sun, 03 Jul 2016 22:03:26 -0400 Cricket….I didn’t hit the bull every time at 150 but several times….maybe 50-55% of the time….. maybe more or maybe less…I was just shooting to see if I could even hit it. But, I was pleased to hit it that many times.kp

]]> c73d501ede92fcabb3191d40dd16440d drumsguns replied to the topic Ted's Challenge in the forum Kalibrgun https://talonairgun.com/forums/topic/ted-s-challenge/#post-255854 Sun, 03 Jul 2016 22:00:22 -0400 Octavius, man I have to disagree with you….looking at the photo I’d say your groups are every bit as good as mine and 14 shots at 55 yards! Perhaps better! Outstanding! I’d be happy with your gun, that’s for sure. :8:

kp

]]> 98946f3b14411a26f29f03f93eee9395 drumsguns replied to the topic Ted's Challenge in the forum Kalibrgun https://talonairgun.com/forums/topic/ted-s-challenge/#post-255838 Sun, 03 Jul 2016 16:35:01 -0400 God afton, Cricket!

Thanks. I have been shooting further and further out with good success. My furthest is 150 yds shooting at a spinner target…but that’s only on the calmest days. Here’s a pic. I only had about an hr to shoot that day so I quickly painted only the center 1″ target, orange. I hit it several times and am happy with that. Wish I…Read more

]]> c272cd6e1b869359ee5fef63de488672 drumsguns replied to the topic Advice MOA vs MILRAD in the forum Optics/Nightvision https://talonairgun.com/forums/topic/advice-moa-vs-milrad/#post-252383 Wed, 04 May 2016 20:17:18 -0400 Wow darryl, that reticle looks like the schematic for the Death Star!

I’m looking at the Athlon 6-24×50 scope. A lot of good buzz about them but their mil-mil- reticle is what I prefer. It has windage lines. Their MOA reticle looks like a Hawke reticle. They are out of stock right now so I have more time to wring my hands.

]]> 2a725e5869d0cdc4c52316639f100cc2 drumsguns replied to the topic Gun losing power? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/gun-losing-power/#post-252381 Wed, 04 May 2016 19:09:42 -0400 I have a Kalibrgun Cricket .25 that I bought new and out of the box it was shooting around 965-970. I decided to give it a few weeks and not touch anything. It dropped down to around 945-950 and I attribute that to the spring settling in.

I didn’t notice it on my condor because I bought a refurb and it was already broken in to some extent.

I’m…Read more

]]> 54f4857bce26398faa51202904189dbc drumsguns replied to the topic Checking if gun is level? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/checking-if-gun-is-level/#post-252379 Wed, 04 May 2016 18:54:43 -0400 You might try this….

Use two levels. Place one on your work bench and one on the floor. Notice where the bubbles are with respect to one another. If the two are the same then your bench or table is level with the floor. If that’s the case great if not then level your table.

Now put one level on the table and with the second, place it on a…Read more

]]> 7894392d40f91005e6e827fcbbe7b488 drumsguns replied to the topic New Condor accuracy HELP! in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/new-condor-accuracy-help/#post-252377 Wed, 04 May 2016 18:37:59 -0400 Hi,

Just my two cents if you are still having trouble. I agree that your original setting was too hot. I recently switched over to JSB EK Heavy MKI and
saw an improvement, not only in the Condor but in my other guns as well. I have read that these pellets really group best around 850 fps. I can attest to that. I’ve been shooting them with good…Read more

]]> ceda952cc42e9f24024d3f28ec08ba65 drumsguns replied to the topic Silver vs Black Impact in the forum FX Air Rifles https://talonairgun.com/forums/topic/silver-vs-black-impact/#post-252366 Wed, 04 May 2016 13:33:04 -0400 I prefer black. To my thinking, this is a hunting gun and I would think that one would not do very well, hiding in some brush with one’s camo outfit on with his nice shiny silver gun giving him away.

I’m waiting on the list for an Impact. Got on the list a few month ago and within a week got a call that Silver ones came in. I think they were a…Read more

]]> ea4a1095587ded0996cbc4522ad0648a drumsguns replied to the topic Advice MOA vs MILRAD in the forum Optics/Nightvision https://talonairgun.com/forums/topic/advice-moa-vs-milrad/#post-251987 Wed, 27 Apr 2016 13:10:49 -0400 Cricket,
Thanks for the response. Yep, I figured that and will probably go with the Mil dot but I grew up in Sweden so I like the metric system better as well. This is a hard decision…slightly finer movement over a more logical system.

Thanks for the input.

KP

]]> 957fb4474e7812a30391151b398fb360 drumsguns replied to the topic Cricket Shorty! - Kalibrgun Cricket Compact .22 in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-shorty-kalibrgun-cricket-compact-22/page/3/#post-249110 Fri, 18 Mar 2016 16:50:32 -0400 First off…great shooting…second off, cool-ass compact, looks like a real keeper…… and thirdly….I grew up in Sweden and your forest pictures bring it all back. I spent all of my free time in the woods behind our house, in Lidingö with my Crosman Powermaster 760. The best of times…..albeit a looooong time ago. Thanks for the photos.…Read more

]]> eeffaee6038c494c00661a1edd7bcd3e drumsguns replied to the topic UH, DOES ANYONE KNOW WHERE THIS CAME FROM? in the forum Kalibrgun https://talonairgun.com/forums/topic/uh-does-anyone-know-where-this-came-from/#post-247577 Thu, 03 Mar 2016 14:54:39 -0400 I see your point Greg. When I first looked at the hole and the grub I said to myself, this is kinda of goofy….that screw could go either way and fall out. I’m hoping the VC-3 will hold it in place. If not….plan B.

Actually, I could live with or without this grub screw. I don’t mind the extra bit of 1st stage travel.

K

]]> d3510cb63e53d5a9e9bd8745bdd8a5d7 drumsguns replied to the topic IMPACT GEN II ? in the forum FX Air Rifles https://talonairgun.com/forums/topic/impact-gen-ii/#post-247576 Thu, 03 Mar 2016 14:49:28 -0400 I’m seeing where these are slow to arrive and the waiting list is long….so I guess kind of a dumb question to ask about Gen. 2 when people are not even getting many in from the initial launch. But, I’ve heard that FX has made some immediate fixes since the first few were released to reviewers and that’s a positive thing.

This is looking more…Read more

]]> a880ab17ecf466426bdf0f7732815de6 drumsguns replied to the topic UH, DOES ANYONE KNOW WHERE THIS CAME FROM? in the forum Kalibrgun https://talonairgun.com/forums/topic/uh-does-anyone-know-where-this-came-from/#post-247436 Wed, 02 Mar 2016 01:59:19 -0400 Here’s a link where I read about the screw….if interested. The first guy to answer (Andy H) has the info.

http://www.network54.com/Forum/79537/thread/1428248312/Kalibrgun+Cricket+Rifle+Trigger+Adjustment

K

]]> 9a8a548c59064ff8aedcc1cdb8982bb0 drumsguns replied to the topic UH, DOES ANYONE KNOW WHERE THIS CAME FROM? in the forum Kalibrgun https://talonairgun.com/forums/topic/uh-does-anyone-know-where-this-came-from/#post-247435 Wed, 02 Mar 2016 01:55:31 -0400 Hey 218bee,

Yeah I’m sure and for two reasons. First if you look at the parts guide pdf you linked me to, the only small grub screw of that particular size is #87. I pulled the rifle apart tonight and low and behold I found the threaded channel at the trigger with no screw in it. I discovered on my own that you screw it in and it slowly presses…Read more

]]> 004fe22384baf9395a83eb24cd9e7507 drumsguns replied to the topic UH, DOES ANYONE KNOW WHERE THIS CAME FROM? in the forum Kalibrgun https://talonairgun.com/forums/topic/uh-does-anyone-know-where-this-came-from/#post-247395 Tue, 01 Mar 2016 18:04:20 -0400 Thanks for the quick reply. I checked the parts diagram and the only grub screw fitting the dimensions is the grub in the trigger assembly M3x6. The one in the shot looks like 3×6 to me. That’s where I’ll look when I get home.

Thanks much guys.

K

]]> 964fcc61eb2ecc45b2f082b9404c5866 drumsguns replied to the topic CRICKET A BIT OFF COMING OUT OF WINTER STORAGE in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-a-bit-off-coming-out-of-winter-storage/#post-247390 Tue, 01 Mar 2016 15:55:53 -0400 Greg…I think you’re spot on. More trigger time and fine tuning the velocity a bit.

218bee. I agree. Mine is also bone stock synth. It came out of the box shooting around 965. The spring has relaxed, as has the regulator so I think that 953 is it’s top now. All of these guns are different. Mine seems to like the velocity a bit higher and with an…Read more

]]> 797bc024fec1e1fd89208509704a28b2 drumsguns replied to the topic CRICKET A BIT OFF COMING OUT OF WINTER STORAGE in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-a-bit-off-coming-out-of-winter-storage/#post-247381 Tue, 01 Mar 2016 14:10:17 -0400 Here’s my last target. 4 groups each increasing one turn in speed at 30 yds. The last two measured 3/8″ and 5/16″ CtC repectively. If it continues to shoot like this I’ll be very happy….so long as it shoots as good at 50.

]]> 65722c2e5cb241f6b047066402d37882 drumsguns replied to the topic CRICKET A BIT OFF COMING OUT OF WINTER STORAGE in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-a-bit-off-coming-out-of-winter-storage/#post-247378 Tue, 01 Mar 2016 13:40:37 -0400 Greg, forgive my ignorance but what exactly is a barrel pull?

I think I’ll post my last target where I changed the hammer spring tension with each successive group. Again I need to get it out again and shoot it to see if it shoots as good as last night. If it does then I’m leaving it alone.
Another odd thing is I had it up to 1/2 turn from full…Read more

]]> 5e1a937773ed0802a5bfeff2916e5916 drumsguns replied to the topic CRICKET A BIT OFF COMING OUT OF WINTER STORAGE in the forum Kalibrgun https://talonairgun.com/forums/topic/cricket-a-bit-off-coming-out-of-winter-storage/#post-247363 Tue, 01 Mar 2016 04:34:31 -0400 Thanks for the answers guys. all screws/bolts were checked for tightness and the scope was re mounted yesterday. I got home from work and to my surprise there was little wind. They have been calling for pretty strong winds all week. Everything was still set up so I got busy with last hr of daylight. Right off I’m thinking the biggest problem is me…Read more

]]> a43c68d2e678ba72fb7c461d0e962e89 drumsguns replied to the topic Condor SS shooting opposite to what I expect after Cleaning in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-ss-shooting-opposite-to-what-i-expect-after-cleaning/#post-239981 Mon, 23 Nov 2015 20:20:13 -0400 Accuracy varied….I have had strange results from this gun all along. It will shoot 5 shots through one hole then the next target you’ll see drastic POI shift with many shots through the same hole then with the next target you might group loose..then another tight group, just very inconsistent. You could blame it on me but I can shoot one hole…Read more

]]> fdd0941becc4b6cc7ef2ff1e04831f01 drumsguns replied to the topic Condor SS shooting opposite to what I expect after Cleaning in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-ss-shooting-opposite-to-what-i-expect-after-cleaning/#post-239855 Sat, 21 Nov 2015 21:04:51 -0400 Wow,not one response. Can only mean one thing…this gun’s got to go…………..

]]> b05d29e2fdd77bb1d880a5f4ccfb6109 drumsguns replied to the topic Soda Cans 700 yds-Pepsi Challenge RECORD in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/soda-cans-700-yds-pepsi-challenge-record/page/2/#post-238088 Mon, 26 Oct 2015 14:48:05 -0400 Sir, All I can say is WELL DONE! One of the funnest things about air rifling, (besides pushing yourself to the next level and hitting the target), is reading about you and others pioneering the art of air rifling to new heights! It’s just so much fun to watch. I am living vicariously through you guys. I have a Condor SS .25 that I am holding onto…Read more

]]> fb7c2e67bae8d360ebb0a4d51bbd3ecb drumsguns replied to the topic Lubing for a cleaner barrel in the forum Kalibrgun https://talonairgun.com/forums/topic/lubing-for-a-cleaner-barrel/page/8/#post-231405 Mon, 13 Jul 2015 14:35:53 -0400 Cleaned the barrel yesterday and the first patch came out almost completely clean….just a faint hint of “dirt.” Lubing is really doing the trick for me. I went out and there were storms to the north and south with me in a window of total calm. Not a breath of wind. Shot a 5-shot group at 50 yards measuring less than 5/16.” I shot a scopecam…Read more

]]>