Talonairgun | dyotat100 | Activity https://talonairgunforum.com/members/dyotat100/activity/ Activity feed for dyotat100. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 403ffbd12db9bf8be1054b8a862d889c dyotat100 replied to the topic "New" project was a Condor SS... in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/quot-new-quot-project-was-a-condor-ss/page/2/#post-273940 Sun, 21 Jan 2018 15:04:06 -0400 quote Rrdstarr:I need to get going on my projects. .300 Talon SS. Need to turn the barrel for the hammer and thread the end for the LDC. Just got my 1/2 x 28″ tap and die.

End of barrel should be single pointed. Only way to guarantee that the threads are true to the bore. I have die holders and still on some things the threads are not true to…Read more

]]> 5941487dd2015e1f3ed841c4ac4a69cc dyotat100 replied to the topic breech end, .30 conversion barrel O.D. please in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/breech-end-30-conversion-barrel-o-d-please/#post-273532 Tue, 26 Dec 2017 01:29:21 -0400 338 is custom. 375 is custom also but in accurate catalog.

338 is shooting 165 gr at 995 fps.

Here is a pic of shooting clays pigeons at 400 yds. Hit 4 in a rowAttachments:

]]> eca5b1aefc482c33cfd19606c79c11b5 dyotat100 replied to the topic breech end, .30 conversion barrel O.D. please in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/breech-end-30-conversion-barrel-o-d-please/#post-273075 Tue, 05 Dec 2017 14:53:34 -0400 I would go for .495″. I try to make the barrel .080″ larger then the bore. Seem to work good so far. You will need to turn it down for power wheel I think also.

I just dropped a .375 barrel in my 308. Makes 400 fpe on 3400 psi with 208 gr bullets. Thats on my 338 size valve. Could probably make 450 fpe or so once I make a proper size valve for…Read more

]]> 301cd2f92255c918a8f72c2b8d4853c0 dyotat100 replied to the topic breech end, .30 conversion barrel O.D. please in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/breech-end-30-conversion-barrel-o-d-please/#post-271546 Sat, 30 Sep 2017 11:46:00 -0400 You want the barrel to be .370″-.374″. The smaller the better. 12 mm is to big. Might work but if you turn it up to shoot slugs it will tank dump.

You want the barrel as thin as possible. That is why when you put a .177 barrel in a .25 condor you have to put a stiffer spring in the valve or it will tank dump.

]]> ab6a19793aa814437377686b214e6490 dyotat100 replied to the topic Who can machine a new breech for my .357 Talon? in the forum General Chat https://talonairgun.com/forums/topic/who-can-machine-a-new-breech-for-my-357-talon/#post-270374 Tue, 25 Jul 2017 05:25:46 -0400 Best breech material is delrin. If you use metal it gauls on the barrel.

]]> deff8ec23c31a48da7daf8aba505d692 dyotat100 replied to the topic Upgrades for texan AFRICAN AIR ORDNANCE any reviews? in the forum Texan https://talonairgun.com/forums/topic/upgrades-for-texan-african-air-ordnance-any-reviews/page/2/#post-267514 Sun, 19 Mar 2017 23:06:05 -0400 Even though one hasn’t blown up the valves are not safe. A friend sent me one and it is way off in the safety factor. I basically had to remake the valve
to fix all the problems.

AAO is in the process of making new valve bodies to replace the old ones.

]]> d035315d34cab33441b3ccce134b92a6 dyotat100 replied to the topic Upgrades for texan AFRICAN AIR ORDNANCE any reviews? in the forum Texan https://talonairgun.com/forums/topic/upgrades-for-texan-african-air-ordnance-any-reviews/page/2/#post-267511 Sun, 19 Mar 2017 21:44:43 -0400 I think it was cooked up by someone. Might have been RL for all I know. I called RL and they said a customer called in and said his valve failed. Thats all I could get out of them. Well AAO contacted all of the people that have purchased the valve and no one has had a failure.

]]> d11b61e7c76cc5f1d108c6d2878882bb dyotat100 replied to the topic Upgrades for texan AFRICAN AIR ORDNANCE any reviews? in the forum Texan https://talonairgun.com/forums/topic/upgrades-for-texan-african-air-ordnance-any-reviews/#post-267411 Fri, 17 Mar 2017 09:15:24 -0400 Yes what Marko says is true. This valve is not made right and is to thin. It is not safe.

Yesterday it was posted on the AF Facebook group page that one failed and destroyed a gun. It’s a closed group so still waiting on more info. RL airguns told one of the members.

I was sent a valve by a friend to modify and was the one that brought up the…Read more

]]> ea6da9029129c7261c4529ceae0785ce dyotat100 replied to the topic Beaumont air guns in the forum Other Guns https://talonairgun.com/forums/topic/beaumont-air-guns/#post-267130 Wed, 08 Mar 2017 21:44:46 -0400 158 gr at 900 fps is 284 fpe.

]]> a3aa8af8a599a504e353d910a5faadbd dyotat100 replied to the topic AEAC in the forum General Chat https://talonairgun.com/forums/topic/aeac/#post-267101 Wed, 08 Mar 2017 06:11:18 -0400 Another sell out.

Airgun nation is a joke. They told American Air Arms that if your not a paying vendor discussion of your guns will not be allowed on the forum. They removed the post od his new gun and banned him.

]]> 512eb18ba64cdb095556e5f42aa2004f dyotat100 replied to the topic .257 Condor Breech Explosion in the forum General Chat https://talonairgun.com/forums/topic/257-condor-breech-explosion/page/2/#post-265509 Mon, 30 Jan 2017 04:48:05 -0400 Take it perform right you need a valve and hammer.

]]> 76e1d845bb038b52c37c4d28751ec9c1 dyotat100 replied to the topic rat sniper slugs query in the forum General Chat https://talonairgun.com/forums/topic/rat-sniper-slugs-query/#post-264834 Mon, 16 Jan 2017 16:31:28 -0400 The biggest problem I had was he didn’t build a prototype to test. Just took money on a idea that someone else had built and gave permission to somewhat copy.

If your going to build a gun for sale it needs to be tested and the bugs worked out. If there are problem they can be fixed before going into production.

One of the 2 guns that were…Read more

]]> 4c83a8d57f51a81a802f0e633921d2cd dyotat100 replied to the topic rat sniper slugs query in the forum General Chat https://talonairgun.com/forums/topic/rat-sniper-slugs-query/#post-264810 Mon, 16 Jan 2017 00:55:52 -0400 He was building a gun he called the millennium pumper. Was a pump gun that would get 3 shots. I think they were $1200 to start but more like $1400-$1500 with shroud.

He drug people along for 1 1/2 years before the GTA finally pulled his vendor status and I’m sure they band him. Was sad. I saw it coming less then 6 months into it. The people that…Read more

]]> 4f30fec715da7c74494adb5bc40f5294 dyotat100 replied to the topic rat sniper slugs query in the forum General Chat https://talonairgun.com/forums/topic/rat-sniper-slugs-query/#post-264799 Sun, 15 Jan 2017 19:56:12 -0400 Wouldn’t buy anything from him. He ripped off people on the GTA with his gun build. 2 out of 12 got there guns and we’re all paid in full up front.

Guy is bad news

]]> 269f6d3784576335cad22bd95d118310 dyotat100 replied to the topic .257 Condor Breech Explosion in the forum General Chat https://talonairgun.com/forums/topic/257-condor-breech-explosion/page/2/#post-264610 Wed, 11 Jan 2017 17:12:34 -0400 I don’t see where you were brought into this.

The original posters name is Tony if you were thinking he was referring to you. Just trying to figure it out.

I’m fixing his gun right now.

]]> 93d4e66e6e6fdaa27651a524b2ce5df8 dyotat100 replied to the topic .257 Condor Breech Explosion in the forum General Chat https://talonairgun.com/forums/topic/257-condor-breech-explosion/page/2/#post-264609 Wed, 11 Jan 2017 17:11:48 -0400 Oops

]]> f81b0ed96a951464072fc2c6c27baf1b dyotat100 replied to the topic .257 Condor Breech Explosion in the forum General Chat https://talonairgun.com/forums/topic/257-condor-breech-explosion/page/2/#post-264605 Wed, 11 Jan 2017 16:06:10 -0400 ???

]]> 02e45466081b4ff80acbc3512ec00531 dyotat100 replied to the topic .257 Condor Breech Explosion in the forum General Chat https://talonairgun.com/forums/topic/257-condor-breech-explosion/#post-264599 Wed, 11 Jan 2017 15:09:11 -0400 If the breech is made out of real delrin it shouldnt happen. Not sure what AF uses. I think they get what ever is cheapest for them and it’s hit or miss on its strength. It sure looks like delrin but doesn’t sound like it when you tap on the broken pieces. I have only seen a few that have broke and is usually with 3600 psi or more.

My original…Read more

]]> 933cfa6946b051390db5d5107ab119d3 dyotat100 replied to the topic texan loudness in the forum General Chat https://talonairgun.com/forums/topic/texan-loudness/#post-264511 Tue, 10 Jan 2017 02:46:17 -0400 RL does and it works real good. All metal and comes apart to clean out all the debris.

I have a friends texan in the garage and I have had it up to 650 fpe with 372 gr slug. The shroud works good. Gun has some serious kick and can only imagine how loud it is without it.

Same gun make 550 fpe on 3000 psi also with 372 or 480 fpe with 280 gr.

]]> 7b790a4f02da6584cde183863ca35e12 dyotat100 replied to the topic .257 Condor Breech Explosion in the forum General Chat https://talonairgun.com/forums/topic/257-condor-breech-explosion/#post-264510 Tue, 10 Jan 2017 02:30:41 -0400 Metal breech doesn’t work real good. Works ok on a stock spring gun. As soon as you increase the hammer spring the breech tends to gall on the barrel. Cocking becomes difficult. Nothing works as good delrin.

Yes I do use aluminum breech but I don’t cock the gun with the breech. Just open and close to load.

]]> ca7b737fe67379f88a10c1e0a6ab12c2 dyotat100 replied to the topic condor weight reduction in the forum General Chat https://talonairgun.com/forums/topic/condor-weight-reduction/#post-262787 Thu, 08 Dec 2016 03:14:30 -0400 No it won’t work. Valves have differnt threads.

Why not get the carbon bottle from Tony?

]]> 752dee71c2cf5f13a581f53da8d1abac dyotat100 replied to the topic Condor SS with NINJA PCP REG 2800psi output and 4500psi paintball tank in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-ss-with-ninja-pcp-reg-2800psi-output-and-4500psi-paintball-tank/page/2/#post-262128 Sun, 27 Nov 2016 02:59:50 -0400 BS on what?

That thing is 20+ hours of machining on my lathe. It starts out as a 16 lb piece of 4″ 1144. Then put in my friends CNC mill for like 2 min to shape the drop down.

I have 2 of them, one on .257 and one on 338. The tank setup is 7lbs. They are both 21 cu chambers. 338 makes 360 fpe and can make more by shimming up the reg.

I have a…Read more

]]> e03f3698cdf0329d5fdf84d6676a2e63 dyotat100 replied to the topic Condor SS with NINJA PCP REG 2800psi output and 4500psi paintball tank in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/condor-ss-with-ninja-pcp-reg-2800psi-output-and-4500psi-paintball-tank/page/2/#post-262126 Sun, 27 Nov 2016 01:01:56 -0400 Thanks guys. I’m pretty much taking a break for awhile. Have a few things to finish and then on to working on my truck.

This is my 338. It shoots 165 gr at 990 fps for 15 shots on 3200 reg setting. It was at 3100 psi but in the winter the cool weather slows them down so I just bumped the reg up 100 psi.

Next is a massive carbon shroud for it…Read more

]]> f19048d751664bfa2e5abe3e0fa81fd7 dyotat100 replied to the topic 50% higher shot count at same FPE in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/50-higher-shot-count-at-same-fpe/#post-262025 Thu, 24 Nov 2016 20:20:44 -0400 My guns are far from stock.

Hammer stroke is 1.25″ and it is 3″ from PW to the hammer.

Right now this gun is shooting 165 gr at 990 fps on 3200 psi regulated.

]]> d5a74b81fc5471e708693318ba0ac00f dyotat100 replied to the topic 50% higher shot count at same FPE in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/50-higher-shot-count-at-same-fpe/#post-261988 Thu, 24 Nov 2016 16:05:23 -0400 Yes I will go out in garage here soon

]]> 3b3e5b09a3fcb91d9de9ffa9452d7231 dyotat100 replied to the topic 50% higher shot count at same FPE in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/50-higher-shot-count-at-same-fpe/#post-261986 Thu, 24 Nov 2016 15:09:54 -0400 I don’t have any stock guns. I do know that when I went from a 4″ to 3.5″ spring it made the valves I make make more power. The main problem is that the stock spring is to long and hammer is to heavy. On a talon 0 PW still to much and people can’t get a curve. There is to much preload just putting the gun together. I found the benifit by accident.…Read more

]]> 48da1eac22a2e62e4f72dae5fa2d4a83 dyotat100 replied to the topic 50% higher shot count at same FPE in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/50-higher-shot-count-at-same-fpe/#post-261973 Thu, 24 Nov 2016 07:46:33 -0400 You can buy shorter stiffer springs. I run 3.5″ springs in all my guns. I even have 3″ springs for my 257, 308 and 338 but haven’t played with them yet. Stock is 4.7 lbs. I’m running 13 lb with 150 gr hammer but my valves are massive compared to stock.

I have never seen a AF gun hammer bounce though. Not sure if it’s just the design or what but…Read more

]]> 249848c392cdd59f29e1b6129ee79820 dyotat100 replied to the topic Please help. got it. in the forum Texan https://talonairgun.com/forums/topic/please-help-got-it/#post-260834 Sun, 06 Nov 2016 18:22:55 -0400 Yeah typical AF. I noticed on newer guns they are putting a type of lock washer on that screw to make it shorter. It’s a bandaid and bolt should be just made shorter.

Friend had the same thing happen to his texan because he tightened up the forearm grip after noticing it was loose.

]]> 95b5ab917d26921850f57bf693b98188 dyotat100 replied to the topic No chatter on new Texan caliber? in the forum Texan https://talonairgun.com/forums/topic/no-chatter-on-new-texan-caliber/#post-260637 Thu, 03 Nov 2016 14:06:15 -0400 AF just doesn’t get it. They are only worried about making a high FPE number. Just like the .45. Won’t shoot a small bullet like 90% of people would do. Barrel twist is way to fast and that’s why it has to shoot 350+ gr slugs. What’s wrong with shooting a 250 gr bullet at 950 fps? Still 500 fpe. Instead they took the easy route and went with…Read more

]]> c79a3551836954d60e81025cc24a42d1 dyotat100 replied to the topic valve/adapter in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/valve-adapter/#post-260592 Wed, 02 Nov 2016 15:46:04 -0400 What valve are you trying to use?

Email me

Dyotat100@aol.com

]]> 39c95d4da4fa12bd03651f24da35a8ae dyotat100 replied to the topic Old wire safety vs new safety in the forum General Chat https://talonairgun.com/forums/topic/old-wire-safety-vs-new-safety/#post-260571 Wed, 02 Nov 2016 00:51:48 -0400 Valves are the same as long as they are condors.

Spinloc is the way to go. I have even figured a way to machine the step for the collar on my old guns.

]]> 9598d36276201c1760c5342bcc11aa28 dyotat100 replied to the topic Old wire safety vs new safety in the forum General Chat https://talonairgun.com/forums/topic/old-wire-safety-vs-new-safety/#post-260558 Tue, 01 Nov 2016 14:23:11 -0400 Old safety is only safe after you remove it. Better off with none.

I like the old spin loc frames better for building because the trigger is more adjustable with the super sear.

]]> 6455db96b7794c062c29abf32a61e60d dyotat100 replied to the topic .257? options? in the forum Airforce Rifles/Pistols https://talonairgun.com/forums/topic/257-options/#post-259896 Mon, 17 Oct 2016 03:23:44 -0400 Takes a bigger valve.

My 7 mm barrel showed up Friday after 11 month wait.

]]> 56059abeed7dd3af36581f99790d93cc dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/17/#post-257529 Wed, 17 Aug 2016 04:44:12 -0400 Warranty?

It’s always the customers fault it breaks remember.

]]> e4c5d77601099768f4a804e29579807e dyotat100 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256428 Tue, 19 Jul 2016 18:00:34 -0400 I use 1% tin.

I open the plate as soon as the lead get hard.

I don’t cook my tin off. I have no discolor in my pot and nothing builds up

]]> dd0c93c78fc836428dc14315f8331def dyotat100 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256364 Mon, 18 Jul 2016 02:52:18 -0400 I have the rcbs pot and it only goes to 850 degrees unless you take it apart and remove the stop on the dial. That requires drilling out all the riots though.

The cheap Lee bottom pour should go past 850 degrees. I have a 220 volt one and it goes way to hot.

]]> 1b387aa046609eceec932b285bf5d9f2 dyotat100 replied to the topic A 257 Cast Bullet Reference Guide in the forum Other Guns https://talonairgun.com/forums/topic/a-257-cast-bullet-reference-guide/page/20/#post-256361 Mon, 18 Jul 2016 00:56:38 -0400 Small bullets need more heat. Turn it up. You will be fine. You see the bullets I gave you. They were cast a lot hotter then you are casting

]]> bdf8f55a7e9764a2758dc5bb73d678c6 dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/16/#post-255496 Sat, 25 Jun 2016 13:42:57 -0400 This must be the new and improved MKll. I see nothing has changed. If they were tested why doesn’t the compressor work when customer gets it. Thing is dented up from shipping I see also.

Best thing you can do is return it. The guy is a junk peddler.

]]> f2dc525c468cf3e5fa80378caa907281 dyotat100 replied to the topic Full length picatinny .257 in the forum Mods/Machinists https://talonairgun.com/forums/topic/full-length-picatinny-257/page/2/#post-255404 Fri, 24 Jun 2016 07:07:01 -0400 I originally did it on my first .308. I cut the slot and a notch to lock the breech forward. Only problem was I forgot to add the end mill size the notch was in the wrong spot. So I came up with the idea of putting a cap on the frame. Then later I made the other piece so it covered the the original slot.

On my frames it’s cosmetic because the…Read more

]]> b6d87bcd4c8e9f10ac9580fa164d398a dyotat100 replied to the topic Full length picatinny .257 in the forum Mods/Machinists https://talonairgun.com/forums/topic/full-length-picatinny-257/page/2/#post-255385 Thu, 23 Jun 2016 22:18:01 -0400 You need 1.50″ OD × 1.25″ ID tubing. Then I put it in lathe and just take enough off the OD to make it round. Then cut off the piece. Then I chuck it up centered in the jaws and bore the ID to 1.260″ that is what most frames measure. Then I put a taper on one end.

Now comes the fun part. You have to cut the tubing up and fit one piece on one…Read more

]]> d3637ece1ff2e09115a1cd80a6e25c3f dyotat100 replied to the topic Full length picatinny .257 in the forum Mods/Machinists https://talonairgun.com/forums/topic/full-length-picatinny-257/page/2/#post-255381 Thu, 23 Jun 2016 20:35:37 -0400

You mean like this?

]]> 0d8d289fbae655327a7ae7566a01e119 dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/16/#post-255088 Fri, 17 Jun 2016 04:39:08 -0400 Heard from a friend that was talking to a guy that got ripped off on some compressor deal. Wasn’t a airmax. He contacted the district attorney. They said if he wasn’t out of state he could get in line with the rest of the complaints.

The guy is just plain bad news

]]> 19d9489f02ade70e7a20423463f313b2 dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/15/#post-254470 Mon, 06 Jun 2016 01:16:26 -0400 My compressor runs Mobil jet engine oil. Comes in a old metal quart can.

Better to have a good oil and a good filter then a so so oil and try not to run a filter.

Really surprised anyone would even think about buying one of these compressors. Especially with his customer service, I mean no customer service

]]> ca978ce54a613a8de34b0b975ac4e365 dyotat100 replied to the topic A question of a slow leak ! in the forum General Chat https://talonairgun.com/forums/topic/a-question-of-a-slow-leak/#post-254168 Wed, 01 Jun 2016 04:57:53 -0400 The o ring around the brass piece in the valve will leak.

Also the seal can leak to.

]]> 8bfd2d94ab75024f8cf345efc909bce4 dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/13/#post-253890 Fri, 27 May 2016 00:21:14 -0400 So you paid $1000+ for a compressor thst can’t fill the tanks we use.

He says he fills 2 tanks from 0-4500 before every compressor shipped.

What’s the point of having this compressor. Even a shoebox can fill a 88 cf tank.

The compressor is a flop.

]]> 087e87d580f67682b9747b1dbe7b62b2 dyotat100 replied to the topic cocked and ready to fire in the forum Texan https://talonairgun.com/forums/topic/cocked-and-ready-to-fire/#post-253861 Thu, 26 May 2016 15:57:42 -0400 Will wear out the hammer spring. It will settle and not be the same length after time.

]]> 13216b15cba009f469c30f042e4ec5a8 dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/12/#post-253771 Tue, 24 May 2016 21:03:14 -0400 You don’t care if you get a little oil and water in your tanks and guns?

You actually think your compressor has a warranty :rofl: :rofl: :rofl:

]]> defc69f4d3cfb83f964e78ed75b8623e dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/12/#post-253628 Sat, 21 May 2016 23:15:02 -0400 I told you he has no plan of fixing them. He is just a peddler of Chinese junk that he charges a premium for.

Answered a question on the yellow today but didn’t answer the one about where are the Hubens from a couple of days ago.

]]> 9155e46cbd74073bdcf4ac40cbcefc5f dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/12/#post-253448 Thu, 19 May 2016 18:37:11 -0400 He’s trying peddle 50 more MK ll compressors. I have a feeling he will not fix any of the first compressors that he sold. Will just blame the customer for miss use.

Unless they knew these things had serious problems already, there is no way they fixed all the problems that fast with any long term testing.

]]> 9f39e7719b6f9c01c2c70c4a6c5e2195 dyotat100 replied to the topic Mrodair Airmax Compressor Review: Prep, Poor Build Quality, Fixes, Ultimately Unsafe for Use in the forum Compressors, tanks and pumps https://talonairgun.com/forums/topic/mrodair-airmax-compressor-review-prep-poor-build-quality-fixes-ultimately-unsafe-for-use/page/11/#post-253445 Thu, 19 May 2016 17:36:51 -0400 Send it to me and I will put it out at 25 yds and shoot it with my .308 condor to put it out of its misery

]]>