https://talonairgunforum.com/members/easy3127/activity/ Activity feed for easy3127. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 50e15431550d0ca8e6b0e38149b6b17b https://talonairgun.com/forums/topic/talon-ss-tank-metal-fatigue-w-video/#post-232748 Wed, 29 Jul 2015 23:50:37 -0400 I agree, have the bottle hydro tested. Sounds like you’ve had that gun sometime now. When is the last time you changed the spring and the o-rings in your breech?

]]> bdc67e5033dd8ed36e1252fc1b9d8502 https://talonairgun.com/forums/topic/what-s-holding-barrel-in-condor-ss/#post-232373 Sun, 26 Jul 2015 16:16:07 -0400 try using a wooden dowel to push the barrel through. It sounds as if your barrel bushings are real tight. Make sure to remove all 6 screws first. After you get your barrel out, you may want to wrap some fine steel wool around a piece of garden hose n use it like a cleaning rod to clean the inside of your frame.

]]> 8c5202443b3b8bee6bc27236399e7350 https://talonairgun.com/forums/topic/let-s-see-some-pictures-of-your-airforce-guns/page/2/#post-230363 Thu, 02 Jul 2015 23:33:10 -0400

]]> a7984dc7464e66e35863532468dad880 https://talonairgun.com/forums/topic/condor-ss-stock-hammer-weight/#post-229886 Sat, 27 Jun 2015 18:16:05 -0400 Both of my stock hammers weighed in at 48 grams. The extra weight for the Condor weighed in at 18 grams. My TT 65 gram hammer slap mod weighed in at 70 grams, my 95 was actually 93 grams.

]]> 0d17a85050a563af19311ec4f79f680e https://talonairgun.com/forums/topic/condor-on-c02-d87/#post-229528 Tue, 23 Jun 2015 18:20:53 -0400 Not sure what your indoor range would be, but you should be alright. As far as 100 yard plinking with a 22cal powered by CO2, it’s gonna be a bit of a stretch to say the least. I may be wrong, my experience using CO2 was with a Talon SS in 177cal. Got a lot of shots,(35-40 shots per ounce) but I had to use significant hold over to hit targets at…Read more

]]> b45be9a2f9ab7cb7af4a3ca67da16df9 https://talonairgun.com/forums/topic/condor-ss-trigger/#post-228579 Fri, 12 Jun 2015 21:13:29 -0400 I ended up installing a supersear. http://www.rlairgunsupply.com/custom-shop/airforce-supersear-2/ It dropped right in and made a huge difference.

]]> 55e7018e04ec5e79a4c77677559b2d5c https://talonairgun.com/forums/topic/12-quot-barrel-22-or-25/#post-224803 Mon, 20 Apr 2015 04:00:19 -0400 After finally getting my TH adjusted, my 12″ 22cal SS is Johnny on the spot. You already have the ammo. It’s also easier to quiet down. 2cents

]]> 815c9b39f0fa4d30995c12218350d5b0 https://talonairgun.com/forums/topic/ttta-jdsairman-reg/#post-224299 Sun, 12 Apr 2015 23:32:23 -0400 http://talontunes.com/shop/talon-tunes-tank-adapter/. What’s your reg pressure set at, n what kind of velocity are you getting? 22,25?

]]> c56b9da62c392e4d9735766b458e4443 https://talonairgun.com/forums/topic/a-baffle-question-d6/#post-224192 Sat, 11 Apr 2015 17:40:13 -0400 I had the same problem w/my Talon ss. I ended up filing down each of the three baffles just enough to slide my TT shroud exstension flush. When I’m not using the shroud, I place a plastic washer with a small rubber o-ring and then the end cap to keep everything from moving around. Hope my little bit of experience helps.

]]> aceaf476133941863e40598237094884 https://talonairgun.com/forums/topic/talon-ss-barrel/#post-185970 Tue, 10 Dec 2013 14:42:55 -0400 I got it. It’s a real tight fit. I was thinking that maybe I had a after market barrel. One that wasn’t the same specs as a factory barrel.

]]>