https://talonairgunforum.com/members/eradicator/activity/ Activity feed for eradicator. Mon, 23 Feb 2026 16:11:56 -0400 https://buddypress.org/?v= en-US 30 hourly 2 59830daa10deafad654cea8df0abe951 https://talonairgun.com/forums/topic/top-hat-questions-d6/#post-52479 Sat, 25 Oct 2008 12:06:59 -0400 My tss came set at .90 also. It is performing so well, accurate, numer of shots, etc. I just left it.

]]> d4fb709062687118e4465d306c0a8b9e https://talonairgun.com/forums/topic/raccoons-in-the-suburbs/#post-50926 Thu, 09 Oct 2008 00:09:36 -0400 I have a stock talon ss 22 with only a mod for quieting the existing shroud. Powerfull enough to take out a coon at 150 feet. Super quiet and a heck of a lot of fun. Accurate enough to take out chipmunks at 150 feet also. The cips eat the wives flower bulbs. Eliminated 19 in the last 2 weeks.

]]> f81dec5b32d6ca720e8182a76ac1fe8d https://talonairgun.com/forums/topic/please-advice-on-condor-loosing-power/#post-49817 Fri, 26 Sep 2008 12:10:25 -0400 What are you filling your tanks from? Is it possible you got small bits of some thing in your tanks. May want to take a tank apart and see since they were both fine at first and then went bad.

]]> 7fcf7605873fa73c502aa88a904ae26d https://talonairgun.com/forums/topic/at-the-end-of-my-patience-with-my-pump/#post-47958 Fri, 05 Sep 2008 22:03:30 -0400 Is the o-ring the right size and thickness? Sounds like it coud be the wrong thickness. A regular black o-ring should be fine.

]]> e0663e68bc605f7405378def5cd3450a https://talonairgun.com/forums/topic/chrony-time/#post-47581 Mon, 01 Sep 2008 12:04:53 -0400 Got a new CED M2. How close to the sensors in height should you be when shooting. How about level? If you shoot through at an angle will that effect the reading? The book says if you are 1/16″ off in length when putting the sensors on the arms, it would be off. That is why I am wondering if going accross at an angle would effect the reading. Book…Read more

]]> bac2edb86049479995d4a6035cee66aa https://talonairgun.com/forums/topic/mouse-fart-quiet/#post-47275 Thu, 28 Aug 2008 23:52:47 -0400 Do not put the rubber washer 1st. The washer you have will not go around the barrel. If you put too light a spring in, it will allow the washer to go at an angle and deflect the pellat. Too light a spring and it will twang. Too narrow and it can twang. I put lawn chair nylon wrap arround my spring to keep it from twanging. Also if you vent the…Read more

]]> a4cd18dd11bd881626bce958a2908d6f https://talonairgun.com/forums/topic/chrony/#post-47123 Wed, 27 Aug 2008 22:46:43 -0400 Is the CED M2 overkill?

]]> e088e5957f56151607c8ed2528fdd54e https://talonairgun.com/forums/topic/chrony/#post-47113 Wed, 27 Aug 2008 21:15:38 -0400 Do you like the seperate readout? Do you think there is an advantage to it over being on the unit? Like the sun not washing it out.

]]> 5572e9a325ca09ebafd130207a2a31a3 https://talonairgun.com/forums/topic/chrony/#post-47103 Wed, 27 Aug 2008 20:28:48 -0400 What do you think of the beta master with the seperate read out? Any advantage?

]]> a1cf201be236332d9e96cd1437dbeea5 https://talonairgun.com/forums/topic/top-hat-or-power-wheel-as-a-constant/#post-46673 Sun, 24 Aug 2008 23:17:28 -0400 Actualy it is brand new. Three weeks old, direct from the factory. Will post picks. It will actualy turn 1/8″ on the stem and the top hat moves on top side to side about a 32nd” each way. Checked the screws and they are tight. I am pusseled.

]]> b6aaa3c7a7a7f4500559b25530248622 https://talonairgun.com/forums/topic/top-hat-or-power-wheel-as-a-constant/#post-46612 Sun, 24 Aug 2008 13:01:21 -0400 Sorry, it is as shown on your link but not as shown on others. But the brass insert with the two holes in it is lower not higher then the outer valve body. The tophat does wobble and turn 1/8″ on the stem with the two set screws tight. Is this correct? Never heard any metion of it. Figure it lets it self align?

]]> b60270cd6b5b12f70d3de5c6a5770eee https://talonairgun.com/forums/topic/top-hat-or-power-wheel-as-a-constant/#post-46611 Sun, 24 Aug 2008 12:52:53 -0400 I can see your confusion, as so am I. My valve body is not one piece. It has a brass insert on top that screws into the valve body. My valve stem has two grub screws. The top hat actually wobbles and turns 1/8″ on the valve stem with the grub scews tight. I never touched it. Is this a new style or am I missing something from the diagrams I am…Read more

]]> eee06ebff0f9015b2f899f6f92f664d8 https://talonairgun.com/forums/topic/top-hat-or-power-wheel-as-a-constant/#post-46525 Sat, 23 Aug 2008 14:23:59 -0400 My valve sticks down about .25 from the tank sides; and the bottom of the top hat 1.00 up from the side of the tank. That would make the bottom of the tophat 1.25 up from the distance they normally measure. Sounds like it is way different then everyone elses. Standard talon ss bottle. Do not have a chrony but I am satisfied with the performance.…Read more

]]> 22745cc19b4766247b480235ace4ceaf https://talonairgun.com/forums/topic/ok-so-i-just-got-this-useless-pile-of-plastic-and-metal/#post-46260 Tue, 19 Aug 2008 22:42:15 -0400 Mine came with the adapter. Got it from compasso.

]]> d958659aaca398330fc0dd1d1b15eed7 https://talonairgun.com/forums/topic/how-do-yall-mount-ya-lls-lasers/page/2/#post-45127 Thu, 07 Aug 2008 12:01:41 -0400 I second spinj. I use it for the same reasons! Whould not do without it. You coud also sight it in for say 30 yards and sight your scope in for 50 yards.

]]> b65cea304893f180e3751f5d78934248 https://talonairgun.com/forums/topic/power-wheel-moving/#post-45125 Thu, 07 Aug 2008 11:31:33 -0400 That is what I thought but it is in place. Wonder if the waser is too thin? Maybe it is not contacting the bushing?

]]> 8009d49778034a25064828d9e6a0d866 https://talonairgun.com/forums/topic/how-do-yall-mount-ya-lls-lasers/#post-45097 Thu, 07 Aug 2008 00:04:18 -0400 I had a beamshot greenbeam 2000 5mw. Changed to a 12mw aimshot. You will not see the difference at night or most dayligt ranges. But if you use it during the day and aim it in direct sunlight on a green or white object you will notice almost twice the distance. Glad I switched, mainly because I had a problem with the beamshot and they have…Read more

]]> 8d76b19852074c2d566d611e8defcf3e https://talonairgun.com/forums/topic/how-do-yall-mount-ya-lls-lasers/#post-45048 Wed, 06 Aug 2008 11:50:50 -0400 I mount my green laser to the bottom. I sight between them when I am greater or less then the set sight distance which in my case is 100′.

]]> 5545fbf4999d3a261368b0a9d6ed3e34 https://talonairgun.com/forums/topic/condor-biopod-laser-mounting-plus-one-other-issue/#post-44916 Tue, 05 Aug 2008 00:24:47 -0400 Is th rubber o-ring on the outside end of the adapter that contacts the bottle when screwed in place there? Is the bleed screw closed? Pull up pause, push down pause. 12 pumps to register, 12 more +- for every 100psi.

]]> b1fd4045c9077f2d835dd6e8fdfa1f15 https://talonairgun.com/forums/topic/who-received-my-email/#post-44724 Sun, 03 Aug 2008 12:52:53 -0400 GOT IT

]]> 034d7e1826632bdccedfbc1b31004214 https://talonairgun.com/forums/topic/filling-the-tank-d93/page/4/#post-44660 Sat, 02 Aug 2008 11:22:42 -0400 SPYDER22, DID YOU RESOLVE YOUR PUMP PROBLEM. FORGOT THE ORIGINAL POST!

]]> 86b699e4bb3e40f97f0d6961fe538ca2 https://talonairgun.com/forums/topic/filling-the-tank-d93/page/2/#post-44533 Thu, 31 Jul 2008 23:17:11 -0400 Almost forgot, stop at the top and bottom stroke for just a second; Do not pump up and down fast or nothing will happen. Also, I had a pinhole leak in my gauge but you could hear the air excape. The missing o-ring I heard nothing.

]]> 57b601bc787f6eb0be6b9e1bcf95356a https://talonairgun.com/forums/topic/filling-the-tank-d93/page/2/#post-44531 Thu, 31 Jul 2008 23:08:47 -0400 Put soapy water on everything and see if there is a leak. Definatly do A not b. Make sure the rubber o-ring is in the grove in the adapter you are screwing your bottle into. I did the same thing and the o-ring was missing, and I did not know it was suppose to have one. Should only take 12 pumps till the dial moves, then 12 pumps per 100psi. The…Read more

]]> 3a3ee33f6faba94432eead484e8a3da5 https://talonairgun.com/forums/topic/air-force-pump-going-bad/#post-44296 Wed, 30 Jul 2008 00:25:40 -0400 I had the same problem. I put soapy water on everything and found the gauge was leaking. I took the pressure gauge cap off. a solder joint had a pin hole. The higher the pressure the more it hissed. Had to put on a new pressure gauge.

]]> f7fda77ad3a502a70a8a7342ab8a4486 https://talonairgun.com/forums/topic/tri-rail-scope-base-to-picatinney-rail/#post-44242 Tue, 29 Jul 2008 13:05:35 -0400 TRY PYRAMYD. Item LERG178-25dm. Scope mount for dove tail, with three picatinny/weaver mounts.

]]> 2a61482e4c68f46f16adc541f85d6dc3 https://talonairgun.com/forums/topic/to-vent-or-not/page/2/#post-43350 Sat, 19 Jul 2008 15:47:56 -0400 When adding springs make sure they are some what stiff. I made a mistake and used 2 long light springs. It alowed the washers to deflect at an angle and thereby deflecting the pellet and just bearly hit the bushing on the way out just denting it a little. Could have been worse, be carefull!!! Good thing I was only on power setting 3.

]]> 614bb29d948b90bbfbf981f288079d24 https://talonairgun.com/forums/topic/any-good-lasers/#post-43349 Sat, 19 Jul 2008 15:38:44 -0400 It was $329 from optics planet. They have a 5mw for much less. At night the 12mw is a waiste of money but during the day it is easier to see on white & green surfaces, (in direct sunlight)!!!

]]> fc73053528382a36ff51e5585f4b72a0 https://talonairgun.com/forums/topic/bushnell-elite-4200-6-24x50/#post-43348 Sat, 19 Jul 2008 15:29:54 -0400 The green laser is just so you can see it in daylight. Go to Opitcs planet & look at the aimshot 5mw, great price. I use my 12mw along with my scope at distance and just it at close range.

]]> 5c543ca52322b6826299dd409fa57bd9 https://talonairgun.com/forums/topic/talon-ss-question/#post-43343 Sat, 19 Jul 2008 14:27:34 -0400 Do not know if it is normal, but I have had my Talon SS for 2 weeks now. I Keep my power wheel at 3 and can hit and take down crows and rabbits at 50 yds, along with getting a couple hundred shots before a refill. It has more then enough power for what I am doing. Along with baffeling, venting the bushing and frame, supper quiet. I am using…Read more

]]> 5c8dfa07f38ba1ebb9eb8b29c9a6e74c https://talonairgun.com/forums/topic/my-talon-ss-arrived-today-but/#post-43339 Sat, 19 Jul 2008 12:50:31 -0400 Kept getting bad shots once in a while, (like a dud). I noticed the white tape also. It was folded and rolled. Looked like it was holding the spring once in a while. Cut it out and have not had the problem since. Not sure if it is just a fluke or not. Some more knowledgeble person on this site may be able to answer that question. Did not hear a…Read more

]]> 5f13fe6e8177c4ef618ee4083086de38 https://talonairgun.com/forums/topic/bushnell-elite-4200-6-24x50/#post-43338 Sat, 19 Jul 2008 12:42:12 -0400 May want to get a geen beam laser for close range. I have the bushnel elite 4200 3x9x40 and can not emagine needing anything better for the money for shooting in the distances I shoot; 10 to 50 yds.

]]> 63ea0ea0d829c304ea1a66b5f6dc0f5b https://talonairgun.com/forums/topic/any-good-lasers/#post-43336 Sat, 19 Jul 2008 12:36:54 -0400 Bought a beamshot greenbeam 2000. Worked great for 28 days. Called beam shot and emailed numerous times, never a return call or email. Lucky I bought it from Optics Planet; they refunded my money. I replaced it with a Aimshot MT-61167. The Aimshot is built better and a smaller dot. Also, I called Aimshot before I bought and they actually answered…Read more

]]> 5d933bdda3f76bc327a006c20b4f2098 https://talonairgun.com/forums/topic/looking-for-a-flashlight-to-go-on-the-ss/#post-43335 Sat, 19 Jul 2008 12:20:17 -0400 I have a Sreamlight TLR1, IT is small, light and bright. A great little LED light. Will last 4 hours constant on, (2) cr123 batteries.

]]>