Work fine for me 100+ shot from a 250 bar fill in .22 @ 30 ft/lbs. ( my long time dream).

Marc shoot a .25

And only less then 1/8″ extra length of the bottle. 😉

I enjoy it very much 100 shots from one fill!

😉

By the old type there is only one part who hold the pressure, that’s the valve in the bottle.
And the are two simple O-rings ( BS011) in the breech, even when they are wear out, the rifle will shoot.

With a simple set hex keys you can dismantle the whole rifle, see all the info. about it on…Read more

http://talonairgun.com/forum/viewtopic.php?f=11&t=30225&p=304840#p304840

Re: breech modifications
Postby ewoodie » Mon Jul 21, 2014 11:17 pm

Keep in mind that with a bigger bore in the breech you make it weak,
When you shoot high power ( solids) it’s possible that it burst.

I…Read more

😛

see picture

you know it’s a weak spot and you have time and tools to make it better, easy choice 😉
cost not a cent, fun to make on a rainy day 😉

a bit Macgyver style :biggrinn:

The adj. reamer is from a local shop, not top Q. ( china )but it works, and put a socket on it and an extension rod and wrench.
at the end of the reamer a put a bushing from black delrin with a good fit in the bore, to center the reamer.

SEMA, O yes a car show, only thing for me are the bunny’s, always a hunter 😛

I’m in November in the Sates Vegas NV. 😛

I will put the the barrel without force in an one piece brass bushing, with a tight fitting in the frame,
so no tension on the…Read more

And boys it’s NOT rocket science, and I will use ONE full length brass bushing for the barrel,( add some…Read more

I recieve this week also a raw chinees ugly bar!

Will try to push an adjustable reamer trough it , maybe with some guiding.
Okay will lost a few 0.1 mm but it will still be MUCH STRONGER then the AF frame.
Specially on the loading breech when I keep half the tube, ( or more )

Advice welcome for tips and tricks, ( thinking…Read more

Just crab it from the web, don’t know of it’s 100% okay.

Tell him before, you pay…Read more

I use aluminium for a big bore breech.

Send a PM to Marc, maybe he want to make you a set, think NOT on MEGA powers ,more about 30 ft/lbs in .22 en 45ft/lbs @.25 with 18″…Read more

@Marc, nice pictures 😎 just one week to go 😛 😛 😛

I did’t shoot so well that day, maybe the 16 grais fly to hot, or I had a bad day. 😳

Here the string I shot.

Some strange numbers, but it was from the plastic disk inside the spring.

I will ask Marc and an other guy if they want to share inside pictures.

After a lot of thinking and trying, trail and error, a freind of me made a REAL INSIDE REGULATOR in the bottle,
Only a few milimeter longer valvehouse
And give 105 shots Hoot: @ 30 ft/lbs with jsb exact 16 grains. With a 250 Bar fill!

i was going mad , My dream was 50 good shots @ 280 m/s ( 30 ft/lbs).

Was thinking the system was made so you only need a short turn to get the bottle from the frame and the quick fill give no trouble to the frame.

Thank you for rhe video very helpfull.

Gunpower for the uk and europe.

Airforce for the rest of the world.

To make a real Mil Spec’s Turret, it need some parts, my home brew,
see picture scope is an old Zeiss 6×42

Talon & Target Turret & Rangefinder = a shooting system,
for 10 to 100 Yards+ ( if there is not to much wind 👿 )

When I have no target turret or rangefinder I’m lost. 🙁

Thank you for you info, but what is the barrel length you use?

ATB, Ewoodie.

Yes , say it my self, but the 3D drawing is pretty good 😉

I made a bolt with two small screws, and it works very nice.

I’m a lefty, and the normal handle did unsrew it self every time.

Looks great, will contact Jirka, when do you have a batch ( a few ) ready 😛

Btw, the regulator looks very nice inside, with the blue lipseals 😯

Okay fooks they are AIRGUNS, so you can better take a .17 HMR

With a little more preload on the spring, it sounds like the normal power output.

Can’t wait to test it, but can’t walk without a crutch, so maybe a guy drive me to the…Read more

thank you for the info, but I’m looking for good grouping at 100 meters, will give it a try with a heavy frame ( one big brass bushing for the barrel) and some nice JSB heavy’s 10,33 grains.

but first tune my .22 and, after that the .25 😉
A lot of work to do.

just the fun of the Talon rifle, play with it.

Play with the powerwheel, hammer weight, and a spacer between the tophead and vavlehouse.

the spacer between tophead and vavlehouse gives more shots,
and less blast behind the pellet ( lost air ).

the extra length is 90 mm for the E-tag reg.
On the picture is an other then the normal Talon bottle.
It’s a short fat one 3000 PSI.
Put a neoprene cover on it, made from a cheap ( $7 )
notebook sleeve, for the time being,
must also make a good butplate for it.

The project of the fixed tophead, is a bit low, maybe we give it a new boost with a .177 rifle.
We try the reg. and I think it’s a good thing to use but, must rework the valving, still have the problem of the LONG locktime,
thinking of…Read more

will take the size of the extra length, so you can try it your self, ( put the extra length to your butplate with a piece of wood with ducktape?

I use an other shorter bottle.