Talonairgun | fannman | Activity https://talonairgunforum.com/members/fannman/activity/ Activity feed for fannman. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 2c42a1c76d1015b349d9aea7d6ff7c85 fannman replied to the topic Would love to see some longish range Cricket .25 groups in the forum Kalibrgun https://talonairgun.com/forums/topic/would-love-to-see-some-longish-range-cricket-25-groups/page/2/#post-194997 Tue, 11 Feb 2014 22:25:59 -0400 when i get my 30 back together i will post some groups myself,before the valve stem let go i was getting some pretty tight groups at 25 yrds at 850 fps but when i turned up the reg some to get it 885 fps it let go on the chrony bench while i was adjusting hammer for a close spread,so hopefully next week i will be able to post on this thread my…Read more

]]> 83563061690f1ee5de1f21d7be1ec7d2 fannman replied to the topic Edgun Valve Stems Order I NEED INFORMATION FROM SOME OF YOU in the forum EdGun https://talonairgun.com/forums/topic/edgun-valve-stems-order-i-need-information-from-some-of-you/page/4/#post-194680 Mon, 10 Feb 2014 00:20:22 -0400 ride i had about 600 rounds when it failed.

]]> da0d03084a0d89443d8ce85be342f1e7 fannman replied to the topic Edgun Valve Stems Order I NEED INFORMATION FROM SOME OF YOU in the forum EdGun https://talonairgun.com/forums/topic/edgun-valve-stems-order-i-need-information-from-some-of-you/page/4/#post-194532 Sat, 08 Feb 2014 15:44:44 -0400 hoot i sent you mine as well

]]> f5e6b4106e99066aee5f8e26179b771d fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/page/3/#post-193273 Wed, 29 Jan 2014 01:30:29 -0400 quote RIDETOEAT:quote fannman:o and I forgot to mention the muffler cover on the gun will get put up and I will turn a new one with a collar on the end that will house the set screws to secure it to the baffle housing,,still working that one out where it looks good and functions well without doing any damage to the housing

What will this gain,…Read more

]]> f02c5c5a1d8643c4f6ea7f5b9e809a97 fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/page/3/#post-193272 Wed, 29 Jan 2014 01:26:30 -0400 ride I did notice that after about a hundred shots or so that the two flats were not lined up like they were after the last time I torqued the barrel nut on my 30 cal they did move because I checked them with a straight edge when I had torqued them and after 100 shots or so I checked them again that’s how I figured it out,,,they wont move again..

]]> 5e53f99506c0c778f3f094bd3011f7ab fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/page/3/#post-193262 Wed, 29 Jan 2014 00:28:30 -0400 o and I forgot to mention the muffler cover on the gun will get put up and I will turn a new one with a collar on the end that will house the set screws to secure it to the baffle housing,,still working that one out where it looks good and functions well without doing any damage to the housing

]]> 33bf873a98e9cf891cd5b59cc362a069 fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/page/3/#post-193259 Wed, 29 Jan 2014 00:19:05 -0400 quote SECoda:Wow. Nice work. I am running 875 fps on my Standard 30 and I suspect it is still a bit hot for the barrel length.

quote fannman:I had to use a ream on the muffler so I figured why stop there,next will be the upgraded hst with lock nut and I will prolly do the hand grip on the stock and have it sprayed with bed liner,next im thinking…Read more

]]> 24c3aca90d2bb66a061266292e2b2d5c fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/page/3/#post-193258 Wed, 29 Jan 2014 00:16:10 -0400 I don’t know what this gun is capable of doing accuracy wise yet, im still waiting on scope to come back from hawke so that will give me time to complete the mods and dream of this thing hitting its mark when I need it too,even if that means 700 fps to 800 fps or more I will study it till I find all its secrets.

]]> 2ec39236d15f34d465244af434439d55 fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/page/3/#post-193255 Wed, 29 Jan 2014 00:09:57 -0400 I had to use a ream on the muffler so I figured why stop there,next will be the upgraded hst with lock nut and I will prolly do the hand grip on the stock and have it sprayed with bed liner,next im thinking I may turn the heat down some on fps to help save the valve and give me a few more shots,hell when you got a 44 grn 30 cal pellet coming out I…Read more

]]> 74b44d6799f1d223db8229e079cf04aa fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/page/3/#post-193233 Tue, 28 Jan 2014 22:12:25 -0400 well I did it she aint a virgin anymore as a matter of fact there are more mods to come,no movement there thanks to a CNC machine, heeeee haaaa

]]> 97a63de2585d981869f5f2bf04754db3 fannman replied to the topic Thinking of drilling and doweling the breech to the upper in the forum EdGun https://talonairgun.com/forums/topic/thinking-of-drilling-and-doweling-the-breech-to-the-upper/#post-192929 Sun, 26 Jan 2014 22:43:55 -0400 ride im following this one for sure,i like the fact that it can be undone if it has a negative effect,i would really like to see ed chime in on this one

]]> ae1c3736a027d7c0b76de3449fb43563 fannman replied to the topic Edgun soft case good? Bad? in the forum EdGun https://talonairgun.com/forums/topic/edgun-soft-case-good-bad/#post-192882 Sun, 26 Jan 2014 18:09:47 -0400 dont hurt to ask and post your results after answer has been given

]]> 062be7adadbec14d826c84996f27c8a5 fannman replied to the topic Edgun soft case good? Bad? in the forum EdGun https://talonairgun.com/forums/topic/edgun-soft-case-good-bad/#post-192875 Sun, 26 Jan 2014 16:47:42 -0400 the bag in question would be my bag,whats it worth I don’t know but I think its iconic for sure its an edgun bag without any markings on it we know that,so why am I selling it,the bag does not fit the gun or better the gun is too long for the bag yes it fits but its a tight fit,so much so I think it puts the barrel under tension when zipped up and…Read more

]]> ed02a858d16d5e182fa12e3ce0054386 fannman replied to the topic R3 .30 Cal in AZ.. Moderator Alignment - Clipping in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-in-az-moderator-alignment-clipping/page/2/#post-192484 Thu, 23 Jan 2014 02:15:36 -0400

i turned a brass rod on my lathe today with a 12 mm hex with hole bored thru it to try and clock the muffler and no dice,so i ended up trying some very fine shims to lower part of muffler to get up and when i did poi was crazy high so i took shim out and worked with it some more and it seemed to start getting a little better after i removed it…Read more

]]> c2450c70051b8959884bb04db6e67a2f fannman replied to the topic R3 .30 Cal in AZ.. Moderator Alignment - Clipping in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-in-az-moderator-alignment-clipping/page/2/#post-192356 Wed, 22 Jan 2014 05:14:55 -0400 I’m gonna sleep on this one tonight .sometimes it works that way, may come up with something before morning.

]]> 6535beeed3b12148c9164f7265073c18 fannman replied to the topic R3 .30 Cal in AZ.. Moderator Alignment - Clipping in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-in-az-moderator-alignment-clipping/page/2/#post-192349 Wed, 22 Jan 2014 04:21:35 -0400 front hole as well as the two baffles right behind it

]]> ae84c04e7fae46efba1bfd498d1479b2 fannman replied to the topic R3 .30 Cal in AZ.. Moderator Alignment - Clipping in the forum EdGun https://talonairgun.com/forums/topic/r3-30-cal-in-az-moderator-alignment-clipping/#post-192343 Wed, 22 Jan 2014 03:40:33 -0400 i have been fighting with my 30 cal all evening i made the tools described and even went further and got on my lathe and made one with hole in center with aluminum rod to center off the bore and i still cant get it to stop clipping i used white out also and it is clipping in the 11 oclock position as well, it looks ok until i tighten the nut and…Read more

]]> 4231f19fd5c6fd5c27cc8e8cae6d39de fannman replied to the topic Edgun R3 .22: Shot String, Air Efficiency, & Trigger in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3-22-shot-string-air-efficiency-amp-trigger/page/13/#post-191710 Sun, 19 Jan 2014 03:34:02 -0400 sorting and measuring this evening and will find the one it likes and will prolly leave it alone and shoot it for a while like that,my 30 cal EG should be here next week so it will get alot of attention i have a feeling ill be firing up my compressor alot more when it arrives.

]]> 70e9ac462bfd0f81172923db5aaac566 fannman replied to the topic Edgun R3 .22: Shot String, Air Efficiency, & Trigger in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3-22-shot-string-air-efficiency-amp-trigger/page/13/#post-191704 Sun, 19 Jan 2014 01:47:16 -0400 tell me brother I was thinking I was gonna have to pull reg to see what was going on then I figured I would back the hst down and go at it again from a full fill and those numbers came up,i think I had seen where you can get close within 20 shot or so and kinda get a clear picture as to where your at or I think you can,i bet the others on here who…Read more

]]> d73973d5d75d0dd18990e7415f943f4c fannman replied to the topic Edgun R3 .22: Shot String, Air Efficiency, & Trigger in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3-22-shot-string-air-efficiency-amp-trigger/page/13/#post-191666 Sat, 18 Jan 2014 23:41:00 -0400 big learning curve today on getting back in front of the reg as ive heard oldgoat say,i was on the backside for a while and pulling my hair out and figured out I needed to back down the hst and start over creeping up on the reg,i had my 22 cal R3 fps down in the 880s and thanks to wingman I have started pushing it up some and sorting pellets to…Read more

]]> c170a0f228b8ed4f4aceb35bc93bdbf4 fannman replied to the topic pellet sorting tool in the forum BullPup General Chat https://talonairgun.com/forums/topic/pellet-sorting-tool/page/2/#post-191587 Sat, 18 Jan 2014 17:22:17 -0400 doing this for now

]]> 3f2ff4e43b8bcad705bd2187e926809c fannman replied to the topic pellet sorting tool in the forum BullPup General Chat https://talonairgun.com/forums/topic/pellet-sorting-tool/#post-191412 Fri, 17 Jan 2014 04:37:42 -0400 quote charlie101:I have pellet spiral problem. I shot JSB 18.1 at same speed and psi, but some pellets traveled nicely, some were not. Wingman said it’s nothing with velocity, it’s pellet size problem. Now I believe so. So sorting tool becomes more important now.

Do you have a picture of your friend’s tool?

i should have one tomorrow or…Read more

]]> 6ba22b042dcfab4b87ef196ffd4b1f64 fannman replied to the topic Complete Edgun Screw Set? in the forum EdGun https://talonairgun.com/forums/topic/complete-edgun-screw-set/page/2/#post-191377 Fri, 17 Jan 2014 02:18:37 -0400 john put me down for some,i have sent you a check for the o rings so i will be sending you another one when you get the screws in. thanks in advance

]]> 8b48ed4e34cb240d4c9c1ff4965897d1 fannman replied to the topic You will either love this or hate it, 5 min. 10 yrd. trap in the forum BullPup General Chat https://talonairgun.com/forums/topic/you-will-either-love-this-or-hate-it-5-min-10-yrd-trap/page/2/#post-191068 Wed, 15 Jan 2014 02:29:41 -0400 quote RIDETOEAT:quote fannman:my 25 yrd target got made as well with removable panel to place targets on

I have tried many times and with a similar setup and you will shoot right through that !!!! my .22 occasionally shoot through 3/4″ plywood in one shot, every time when hit more than once in the same place.

.25’s will shoot through on the…Read more

]]> 0ffd6380d5ce2667fc027e616868bf24 fannman replied to the topic You will either love this or hate it, 5 min. 10 yrd. trap in the forum BullPup General Chat https://talonairgun.com/forums/topic/you-will-either-love-this-or-hate-it-5-min-10-yrd-trap/#post-191047 Wed, 15 Jan 2014 00:51:10 -0400 ride ,about six inches into the box front is another piece of plywood that is held in with screws and the front of it i staple on cardboard so from cardboard front to false wall is about 6 inches that way all the rubber mulch is contained when its been shot to hell all i do then is turn it upright remove the screws and put another wall back in and…Read more

]]> 818fdb6aad70d44365f345d519328b85 fannman replied to the topic You will either love this or hate it, 5 min. 10 yrd. trap in the forum BullPup General Chat https://talonairgun.com/forums/topic/you-will-either-love-this-or-hate-it-5-min-10-yrd-trap/#post-191037 Wed, 15 Jan 2014 00:14:18 -0400 my 25 yrd target got made as well with removable panel to place targets onAttachments:

]]> e97b49b78a5fa5247df69a853a9a4589 fannman replied to the topic You will either love this or hate it, 5 min. 10 yrd. trap in the forum BullPup General Chat https://talonairgun.com/forums/topic/you-will-either-love-this-or-hate-it-5-min-10-yrd-trap/#post-191036 Wed, 15 Jan 2014 00:09:03 -0400 made mine today also ,its filled with rubber mulch at least twelve inches and packed tight with a shoot thru wall .Attachments:

]]> 92036165f56278ec83415fd2d3ee3416 fannman replied to the topic Who has experience with Dive Compressors in the forum BullPup General Chat https://talonairgun.com/forums/topic/who-has-experience-with-dive-compressors/#post-190901 Tue, 14 Jan 2014 04:15:14 -0400 o and when you have a compressor like that its not even a second thought when you need to degass your gun to make a reg change.after my second pcp i went all in on it and never give it a second thought .

]]> 205f5d7d6342f47bfd3e0885da4eab68 fannman replied to the topic Who has experience with Dive Compressors in the forum BullPup General Chat https://talonairgun.com/forums/topic/who-has-experience-with-dive-compressors/#post-190900 Tue, 14 Jan 2014 04:09:53 -0400 hey ride i bought an airtex 4500 compressor a year and a half ago and love it, i have about ten hours on it now and thats filling my airhog tanks as well as my buddies it dont take long at all when they are down to 3000 or so psi maybe ten minutes to top one off i think the filters need to be serviced at 100 hours or so if its breathing air i…Read more

]]> 107d7facd9d35e5180e3e56290e911f1 fannman replied to the topic R3M /R3 Review and Performance .WoW in the forum EdGun https://talonairgun.com/forums/topic/r3m-r3-review-and-performance-wow/page/12/#post-190891 Tue, 14 Jan 2014 03:33:38 -0400 im using sow mo cam on mine also at ranges of 70 to 100 yrds with the insinde of the skirts sharpie marked white to help and they do hit there mark but the spiralers that were bad were real bad,so what your saying is im gonna have to batch and sort pellets to find the sizes my gun like witch were the smaller head sizes

]]> b4f004b5dbd073f245ef42730e30b57a fannman replied to the topic R3M /R3 Review and Performance .WoW in the forum EdGun https://talonairgun.com/forums/topic/r3m-r3-review-and-performance-wow/page/12/#post-190882 Tue, 14 Jan 2014 03:13:11 -0400 quote charlie101:Today I shot jsb 18.13 at 909 FPS through the clean barrel, the pellets were still spiral.

I turned the HST back in one turn and keep the reg at 120 bar, the velocity went up to 928 FPS.

I tried to make another half turn in, the fsp went up to 940 and could not go higher even HST turned in. So I back HST out to let velocity…Read more

]]> b78f0c2202573747618f30c4a0f35fd5 fannman replied to the topic Shooting Chrony lights, and no more incandescent bulbs in the forum BullPup General Chat https://talonairgun.com/forums/topic/shooting-chrony-lights-and-no-more-incandescent-bulbs/page/4/#post-190762 Mon, 13 Jan 2014 03:48:07 -0400 i set mine up very much like this one

]]> 1ab5b0638ad4aaeed3097b1278a864fe fannman replied to the topic Shooting Chrony lights, and no more incandescent bulbs in the forum BullPup General Chat https://talonairgun.com/forums/topic/shooting-chrony-lights-and-no-more-incandescent-bulbs/page/4/#post-190720 Sun, 12 Jan 2014 23:21:51 -0400 i have the master chrony as well that i use in my shop to tune my eddie ,but i use a piece of cardboard cut to fit in between the defusers to block light from above and a halogen drop light on the ground pointed up at an angle to illuminate the defusers and it has worked well for me.

]]> bbbb9bbeed7f8a2a7a2670af9ba2e63c fannman replied to the topic How to get my cricket to the same speed as EDdie in the forum Kalibrgun https://talonairgun.com/forums/topic/how-to-get-my-cricket-to-the-same-speed-as-eddie/#post-188980 Sun, 29 Dec 2013 05:39:19 -0400 Buy an Eddie and sell the grasshopper

]]> 376cfc50e486fe8f049d0ea62522b895 fannman replied to the topic bedding my R3 22 cal in the forum EdGun https://talonairgun.com/forums/topic/bedding-my-r3-22-cal/#post-188865 Sat, 28 Dec 2013 05:41:20 -0400 I went a step further and pulled the barrel and polished it on my buffing wheel where the o ring rides on the barrel when installed and lubed it good with divers grease to insure the barrel can move and return from shot to shot if it needs too, hey I figured it can’t hurt actually I think it may have helped ,if the barrel wants to float I made…Read more

]]> 1942f44948b83f16225b890fbd1859d8 fannman replied to the topic bedding my R3 22 cal in the forum EdGun https://talonairgun.com/forums/topic/bedding-my-r3-22-cal/#post-188611 Wed, 25 Dec 2013 23:30:07 -0400 groups are getting even better after I pulled barrel and cleaned and inspected everything one thing I noticed was the shroud fitting that has the oring inside of it was stuck pretty good on the barrel,i got it to move and lubed it with divers grease and installed it and tightened barrel 1/4 turn past hand tight,im kinda thinking the barrel needs…Read more

]]> 8cb1ba122a7c669cc65e44af84efa738 fannman replied to the topic bedding my R3 22 cal in the forum EdGun https://talonairgun.com/forums/topic/bedding-my-r3-22-cal/#post-188595 Wed, 25 Dec 2013 19:50:40 -0400 how tight have some of you gotten the ss fps on your edguns

]]> b9349e320567bc5cfd4f764b7b58e262 fannman replied to the topic bedding my R3 22 cal in the forum EdGun https://talonairgun.com/forums/topic/bedding-my-r3-22-cal/#post-188585 Wed, 25 Dec 2013 18:31:29 -0400 update the groups did get better with the low 880 tune, now i just need to fine tune the hst to get real consistent ss i may need some imput on that but one thing i did figure out while testing it the other day is it seems to like a head diameter of 552 vrs the 553

]]> d6a3908094e8d14464090191d37cc6a0 fannman replied to the topic bedding my R3 22 cal in the forum EdGun https://talonairgun.com/forums/topic/bedding-my-r3-22-cal/#post-188572 Wed, 25 Dec 2013 15:45:54 -0400 ive got about 1500 thru it as of yesterday ,last night I tuned it down to 880 mark and will shoot some today to see what it does and yes the barrel was cleaned several times and about 20 shots to get it seasoned back up before I shot videos, I think im getting this reg pulling and adjusting down pretty good .

]]> a92ecce360de14882413a2ec5e799911 fannman replied to the topic WARNING: Do You Own A FrankEdstein EdGun? in the forum EdGun https://talonairgun.com/forums/topic/warning-do-you-own-a-frankedstein-edgun/page/14/#post-187940 Sat, 21 Dec 2013 04:22:25 -0400 this is a rough crowd on here if you show some weekness you could be shamed badly,

]]> 9c947eb7dd08504aa2cbe3be995b3552 fannman replied to the topic Ed Gun Tony wants to know in the forum EdGun https://talonairgun.com/forums/topic/ed-gun-tony-wants-to-know/#post-156193 Thu, 24 May 2012 20:06:58 -0400 a phone number would be nice and an offer to double box guns with extra attention to packing them up before shipping and insurance,of course that will be extra, would be all that i would ask

]]> 3692f4b2ea8d67a362c5e9a350543ad6 fannman replied to the topic Don't feel like the Lone Ranger on the broken Stock! in the forum EdGun https://talonairgun.com/forums/topic/don-t-feel-like-the-lone-ranger-on-the-broken-stock/page/5/#post-156186 Thu, 24 May 2012 18:35:05 -0400 my experience buying my r3 that i recieved a few weeks ago went through without any problems, i wired the money and tony told me through email that he got it but wasnt sure it was from me since it did not have my name on it, just my branch location from my bank and several emails later i convinced him that it was from me,the only problem i have is…Read more

]]> 7568ca3131b22d2046e236735490983f fannman replied to the topic Don't feel like the Lone Ranger on the broken Stock! in the forum EdGun https://talonairgun.com/forums/topic/don-t-feel-like-the-lone-ranger-on-the-broken-stock/page/4/#post-156130 Thu, 24 May 2012 03:19:14 -0400 i think i said on the first edgun that was damaged that tony needed to double box the guns and charge more for shipping,one box with a few peanuts and the edgun in its case aint gonna cut it in my opinion,the last gun i shipped was an edgun and i went overboard on the packaging and shipping with insurance that cost me 90 bucks but i slept well…Read more

]]> 9aadb000ca95e7ed5aadced94d19a640 fannman replied to the topic New R3 .25.....damaged!!!!!!!!!!!!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/new-r3-25-damaged/page/3/#post-155204 Thu, 10 May 2012 19:09:15 -0400 i think tony needs to go up on shipping charges and double box the guns from now on,i mailed off my used edgun a few days ago and double boxed the gun and stayed there and inspected the boxing process,and when i left i felt good about the UPS SLAM DUNKERS not breaking the gun,it did cost more but i slept well knowing the new owner of a hard to get…Read more

]]> 793a6965573f9b937f44d5b3def35a25 fannman replied to the topic New R3 .25.....damaged!!!!!!!!!!!!!!!!! in the forum EdGun https://talonairgun.com/forums/topic/new-r3-25-damaged/#post-155148 Thu, 10 May 2012 03:55:12 -0400 quote Mrnewbie:samuria998,

You want some advise…be it a smidgen devious.

Climb your roof, drop that box, smash up the end a little.

UPS, will FWY on this claim. If there is no VISABLE damage they WILL deny the claim.

We KNOW Tony did not ship it like that, he said so, so UPS DROPPED IT!

If they FWY, send me an email, I will find the phone…Read more

]]> 1eded844d4f58b721820a1fe98f083f3 fannman replied to the topic Edgun is shipped! in the forum EdGun https://talonairgun.com/forums/topic/edgun-is-shipped/#post-155040 Tue, 08 May 2012 03:37:35 -0400 i just got my R3 today and have been shooting chrony strings and adjusting hammer spring to see where it wants to stay consistent with the current reg settings and it keeps a pretty tight spread around 905 fps as the most consistent so far,so im gonna stick with that for a while ,new edgun owners know that surreal feeling when you open the box and…Read more

]]> c999f6ec00aad3fa167dc1b0bb2f8ff3 fannman replied to the topic Got the email... Woohoo! in the forum EdGun https://talonairgun.com/forums/topic/got-the-email-woohoo/page/5/#post-154967 Mon, 07 May 2012 03:43:18 -0400 mark you have to have some pretty thick skin on this forum, some of these guys in here will eat you alive, but hey they do it with a keyboard not there edgun

]]> 490c731098b41f3c4567515683253d70 fannman replied to the topic Edgun R3 order process? in the forum EdGun https://talonairgun.com/forums/topic/edgun-r3-order-process/#post-154909 Sun, 06 May 2012 04:35:31 -0400 i waited 5 months or so before i got the magic email ,but i did manage to buy two edguns on the yellow used and i paid a premium for them,they do come up for sale every now and then, you just got to be ready when they do, and i can tell you if you like compact and accuracy you wont be sorry they perform well at that

]]> 1288b20d87ee1efd89e3a99a9445f5d8 fannman replied to the topic EDGun in the forum EdGun https://talonairgun.com/forums/topic/edgun-d92/page/2/#post-154864 Sat, 05 May 2012 15:18:52 -0400 i needed to make room for r3, not sell to pay for r3 the r3 is already paid for i just didnt need two edguns to go with my collection, one will do just fine. wow funny how people assume.

]]> 70ddb837e6062a6beebdb71a67f6bcbe fannman replied to the topic EDGun in the forum EdGun https://talonairgun.com/forums/topic/edgun-d92/#post-154843 Sat, 05 May 2012 01:39:43 -0400 quote Riverside:is it wrong when an exotic automobile dealer asks a premium for early delivery of special models?

how about the service fees paid for an expeditied Passport?

If you don’t want to wait patently in line you will Always pay premiums 😉

well said riverside ,besides this gun has had some mods done to it that i think are worth…Read more

]]>