Talonairgun | flynled | Activity https://talonairgunforum.com/members/flynled/activity/ Activity feed for flynled. Thu, 09 Jul 2026 01:06:06 -0400 https://buddypress.org/?v= en-US 30 hourly 2 5bb77639c8bf8ca3b58d4c2a3b979cb6 flynled replied to the topic OILED PELLETS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/oiled-pellets-d79/page/2/#post-79650 Wed, 12 Aug 2009 03:21:52 -0400 quote Tachdriver:5 drops of FP-10 per tin, shake and sit.

later

Tach,
do you lay a piece of foam or the material that comes in sum pellet tins on the bottom or not.

]]> 1864f91c59f7c569f80035f97ccb88bb flynled replied to the topic SIGHT FOR CLOSE UP? in the forum Optics/Nightvision https://talonairgun.com/forums/topic/sight-for-close-up/#post-79590 Tue, 11 Aug 2009 16:31:41 -0400 quote AKULA:Flyn; The raised scope rail, on our guns, make close in shots difficult. I went with a green laser for this type of wet work. It works well as aquistion times for close in targets is critical. Just press, point and kill. AKULA

Thanx for te reply…..which laser do you have ?

]]> 70d8fd72a2633ff6c3246ac29285afda flynled replied to the topic co2 tank pressure in the forum Talon/Talon SS https://talonairgun.com/forums/topic/co2-tank-pressure/page/2/#post-79582 Tue, 11 Aug 2009 14:24:14 -0400 quote njnoodles:I fill my co2 tanks with air to 2400 psi, through the co2 adapter, and utilize a 1800 psi output regulator. I have never had a problem.

Hmmm, I didnt know we can do that !

]]> 8f1d0e6b5f8269ae28eaacfef5cbe068 flynled replied to the topic DRAGONSLAYER NOISE LEVEL...9MM VS .45 ? in the forum Other Guns https://talonairgun.com/forums/topic/dragonslayer-noise-level-9mm-vs-45/#post-79543 Tue, 11 Aug 2009 04:24:20 -0400 quote waynejitsu:I have a 50cal DS and the noise is-
1- Louder and
2- much deeper
I do not shoot mucch in the back yard with it…, it does sound like a “gun”

Ok, can ya be a little more specific …..what gun ? 🙂

Browning hi-power , Colt 45 , 50 calibur Hawkin, …. 22 mag….we are splitin hairs here…..Iam tryin to figure out if I can…Read more

]]> 1381dbf50db31ef4dd5f07b3208b1851 flynled replied to the topic DRAGONSLAYER NOISE LEVEL...9MM VS .45 ? in the forum Other Guns https://talonairgun.com/forums/topic/dragonslayer-noise-level-9mm-vs-45/#post-79389 Mon, 10 Aug 2009 02:25:36 -0400 quote 80 GRIT:Shooting indoors if my condor is a 7 on a sound scale of 1 to 10 my Dragon is a 9. Just a little louder than the condor. Neither one warrants ear plugs, however.

Hmmm,
thats sort of encouraging, sound behind the weapon is funny though….its hard to compare that with sum one to the side of it at a distance….I would have to…Read more

]]> 7ab69807f12207d77b6fe9494b6e772a flynled replied to the topic TICKED OFF ! in the forum Other Guns https://talonairgun.com/forums/topic/ticked-off/#post-79383 Mon, 10 Aug 2009 01:24:54 -0400 quote Yellow Ninja:My AA wouldnt pump either – I called Pyramid and they said… oh you should have said that you were going to use a pump, we would have shipped it with some air. Apparantly it needs about 500 psi before theres enough pressure inside tank to close the fill valve.

I had lent my scuba to cygnusx so I rigged up a paintball CO2 tank…Read more

]]> 8103397159baa117f3eb064cf7b9350c flynled replied to the topic TICKED OFF ! in the forum Other Guns https://talonairgun.com/forums/topic/ticked-off/#post-79369 Sun, 09 Aug 2009 22:49:28 -0400 quote Saugus18:quote Levis2:quote RiffRaff:Im not familiar with the Disco, but with an Air Arms gun, you have to cock it before you attempt to fill it or the air just blows straight thru.

Huuh? 😯 When i pumped up my AA S410 for the first time yesterday, i had no air coming out of the barrel. And the gun was not cocked.

That’s probably…Read more

]]> ab5070d410e1e9ab8298789a8dd4cb4d flynled replied to the topic DRAGONSLAYER NOISE LEVEL...9MM VS .45 ? in the forum Other Guns https://talonairgun.com/forums/topic/dragonslayer-noise-level-9mm-vs-45/#post-79357 Sun, 09 Aug 2009 20:30:15 -0400 quote BUTCHER45:When in thick cover, they are close to a .22LR in noise, but without the sonic crack. Out in the open desert, the sound can’t really bounce around much, and seems much quieter.

This is from the perspective of the shooter. A bystander about 25 yards away told me my modded 909 sounded like a rock thrown into a concrete wall,…Read more

]]> d74a042a5bdb2a45a325cfecdd91f6ab flynled replied to the topic TICKED OFF ! in the forum Other Guns https://talonairgun.com/forums/topic/ticked-off/#post-79267 Sat, 08 Aug 2009 22:56:12 -0400 quote maw:Is the bleed screw closed.

Good Question…..but yes my friend….it is closed…can hear the air coming out of the gun.

]]> aece1841643907f0715502976bd2929b flynled replied to the topic Photos of my new S410 stock Lots of photos in the forum Other Guns https://talonairgun.com/forums/topic/photos-of-my-new-s410-stock-lots-of-photos/page/2/#post-79265 Sat, 08 Aug 2009 22:41:36 -0400 quote kgphotos:Here are some photos of my new stock. This is an AA S410 ERB. My grandfather made this stock for me. I did the sanding 😀 It is made of Madrone which is related to Manzanita (thats why it is so red) My grandfather is 85 years old and he personally cut the wood blank in the late 50’s One photo is me holding the wood blank before we…Read more

]]> 59b3f4db63df4c5cded082182b5302f1 flynled replied to the topic TICKED OFF ! in the forum Other Guns https://talonairgun.com/forums/topic/ticked-off/#post-79263 Sat, 08 Aug 2009 22:19:45 -0400 quote airtight_python:Gotta cock the DAQs and even Sheridans before pumping ’em too or the air comes out the barrel. Hope you didn’t get a lemon, seems to be happening more often.

Ya know that figures,the only luck I have is usually bad….I live in a screwed up state..they dont want you to have toys in your closet….so I have to play games and…Read more

]]> 84e3c62344578f04db36af505c18edb7 flynled replied to the topic TICKED OFF ! in the forum Other Guns https://talonairgun.com/forums/topic/ticked-off/#post-79250 Sat, 08 Aug 2009 20:09:42 -0400 quote RiffRaff:Im not familiar with the Disco, but with an Air Arms gun, you have to cock it before you attempt to fill it or the air just blows straight thru.

The instructions sure say uncocked and safety on……but I will try it for the hell of it…..thanks !

]]> d7d8d116ac5e1d5abb8afb055bcdaa30 flynled replied to the topic TICKED OFF ! in the forum Other Guns https://talonairgun.com/forums/topic/ticked-off/#post-79244 Sat, 08 Aug 2009 19:24:27 -0400 quote FLYNLED:I just received the Ben Disco I ordered…..mounted Mr SCOPE…attempted to charge….pumped…pumped and pumped….the pressure guage never moved.Then I got down on the floor with the piece and stroked it one time and I heard……….sisssssssssss ! F@%^K ! it sounds like it is coming near the guage on the gun or near the breach…Read more

]]> 233074c4daa25a2cafa196fe17f2e9aa flynled replied to the topic co2 tank pressure in the forum Talon/Talon SS https://talonairgun.com/forums/topic/co2-tank-pressure/#post-79236 Sat, 08 Aug 2009 16:53:25 -0400 quote Hoot:If you filled the CO2 tank with air, would you need to change out the CO2 adapter and use the air adapter instead? It would be neat not to have to buy an entire new setup to get 1500 to 1800 psi in the winter. I’m thinking filling the tank might be a problem with the CO2 adapter in place?

Hoot 😯
I dont think we could even do…Read more

]]> fc05ffdbc1b6cabf9db81c39c50e93fe flynled replied to the topic SCOPE SAVY----SIGHTING in the forum Optics/Nightvision https://talonairgun.com/forums/topic/scope-savy-sighting/#post-79143 Fri, 07 Aug 2009 12:04:07 -0400 quote knifemaker:There is no poi shift in a good quality scope. With a poor quality scope, EVERY THING can change poi. Zoom, parallax focus. rear focus. There are some real POS out there! 👿

This is one of the biggest reasons that when looking at the purchase of a lower cost scope, look for quality. Not a lot of bells and whistles. It is…Read more

]]> 611ee5583b421f906b5ea1c9867a7b7a flynled replied to the topic OILED PELLETS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/oiled-pellets-d79/page/2/#post-78994 Tue, 04 Aug 2009 17:51:38 -0400 quote rob3dr:If you have springers that you shoot as well as PCP, then you’ll want to use Krytek to lube your pellets with as FP-10 does not tend to diesel.

If all you are shooting is PCP, or you only use a certain pellet for PCP, MSP, or CO2 guns, then FP-10 is the way to go.

I’ve been using both products for years with no ill effects on…Read more

]]> 2be84d4b3f77050a0be1d83901468d00 flynled replied to the topic GUAGE AND CLAMP in the forum Talon/Talon SS https://talonairgun.com/forums/topic/guage-and-clamp/#post-78986 Tue, 04 Aug 2009 15:42:35 -0400 quote mamcrackin:quote FLYNLED:I will need a guage and clamp here pretty quick….should I pass on the AF and look for sumthing better or is it adequate ?

I have the one on the left I don’t use..The plastic gauge lens has a
small crack on the top right..Can’t see it in the picture……Will sell….
You will need a double female adapter to…Read more

]]> 44527b88c417bbb5ed02d6b4ab4b3182 flynled replied to the topic HPA TANK in the forum Talon/Talon SS https://talonairgun.com/forums/topic/hpa-tank/#post-78984 Tue, 04 Aug 2009 14:28:57 -0400 quote crowpopper:with the adapter theycould but for the 30 shots u get its a waste to drive there also they maynot fill it anyways
id get a seperate tank preferably 4500 carbon tank the loca shop here fills 4500

The dive shop I went to yesterday had nice used tanks certified for four years for $ 120 bones ,no scratches,seemed like new in…Read more

]]> 9f6e4b476ff97fdfe25d937e74fc7f1b flynled replied to the topic OILED PELLETS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/oiled-pellets-d79/page/2/#post-78976 Tue, 04 Aug 2009 12:33:14 -0400 quote 07condor22:FLYNLED: Bicycle shop, Probably NOT in a Harley Shop don’t really know? We do have a Harley shop, will call to see?

Sam 8)

😆 😆 😆 😆 Shit, when Saw said bike , me thinks …Harley ! 😆
Most harleys anymore are Sturgis anyway ,cept for older ones….I be gotten a pedal bike shop around too…its a fancy…Read more

]]> b72fb0f7595d16d241e4373b57bc2d16 flynled replied to the topic OILED PELLETS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/oiled-pellets-d79/page/2/#post-78966 Tue, 04 Aug 2009 02:12:04 -0400 quote sawtime:kry-tech
Mac-1 reccomends it.
I dries completely and smell good too.
It’s actually a chain lube check bike shops.

SAW

Hey saw,
thanks man,I have a Harley shop here in town, i will look for it….I picked up fp-10 ,but I like to experiment…got alot of flavors of pellets anyway…between the Talon in two calibers and I have a…Read more

]]> 89b55615a195cfe9ccb9ce0cf3d507ce flynled replied to the topic OILED PELLETS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/oiled-pellets-d79/page/2/#post-78952 Mon, 03 Aug 2009 23:23:09 -0400 quote knifemaker:I like to put a few drops on the foam in the tin, roll aroung a few,(50 or so), dump those out, and do the entire tin. This way, only a very little bit of the oil get’s tranfered. You don’t want them WET!

Thanks knifeman ,that sounds like a good plan…..now , after you have finished the whole can ,do you leave the foam in or…Read more

]]> 21bfe8e7b7ac7fb1226029792e20eec0 flynled replied to the topic co2 tank pressure in the forum Talon/Talon SS https://talonairgun.com/forums/topic/co2-tank-pressure/#post-78907 Mon, 03 Aug 2009 14:36:10 -0400 quote Yellow Ninja:No it does not turn into 2000psi. Guns on CO2 run lower velocity than those on a full fill of HPA.

I realize that ,should the co2 tanks be charged at 2000psi ? when using hand pumps,co2 is pumped to 2000psi and h/p air to 3000…..850psi is what puzzles me.

]]> 4b237d1b26827a4cd4039983b544fac8 flynled replied to the topic Talon SS, has trouble cocking in the forum Talon/Talon SS https://talonairgun.com/forums/topic/talon-ss-has-trouble-cocking/#post-78838 Sun, 02 Aug 2009 13:11:50 -0400 quote TerrySS:Bought the gun used, it has a trigger mod of some sort done to it. 😕 I am having trouble cocking this gun. Sometimes it catches first time, sometimes I have to push it several times. Sometimes I have to push it all the way up, and then mess with the knob from side to side. What so you think could be causing this? What should I…Read more

]]> 19a4cfc6d8a9cd0526c8167f0623c01c flynled replied to the topic SS WOULD NOT FIRE in the forum Talon/Talon SS https://talonairgun.com/forums/topic/ss-would-not-fire/#post-78831 Sun, 02 Aug 2009 04:36:38 -0400 quote WalkonKing:quote FLYNLED:quote WalkonKing:Well actually when you pull the bolt completely over the top hat a slight click is heard it passes over the oring.

Off Topic for a minit.
Did I just read in another thread that you are making grips ?

This is what I make….

Wokbutt

Trigger guard

AR15 Grip adapter

Altogether…Read more

]]> 3447c2e254b34f5771dd11951f8fac51 flynled replied to the topic SIGHTIN THE SCOPE ? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/sightin-the-scope/#post-78820 Sun, 02 Aug 2009 01:21:46 -0400 quote knifemaker:Here is a neat trick.

After you have your gun on a proper rest, fire one round. Place the cross hair exactly back to the point of aim. Now, without moving the rifle even a little bit, adjust the cross hair to the point where it intersects the pellet hole. Fire another round for effect. If you didn’t move the rifle. You are now…Read more

]]> a4ac38979083b85dc8f444b5b05f1f7c flynled replied to the topic SS WOULD NOT FIRE in the forum Talon/Talon SS https://talonairgun.com/forums/topic/ss-would-not-fire/#post-78806 Sat, 01 Aug 2009 23:37:53 -0400 quote WalkonKing:Well actually when you pull the bolt completely over the top hat a slight click is heard it passes over the oring.

Off Topic for a minit.
Did I just read in another thread that you are making grips ?

]]> 712f95b2427175a784c1ef9c128cf1f6 flynled replied to the topic DID I SCREW UP ? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/did-i-screw-up/#post-78801 Sat, 01 Aug 2009 23:07:45 -0400 quote 07condor22:Yes and NO?

To use a Hi Flo Condor tank with the talon you need to use a condor Hammer or a extra hammer weight to get condor performance.

Using a Talon tank with a 24″ barrel will get higher velocities than using shorter barrel. The Hi Flo tank will use much more air and yield less shots per tank fill.

If you want a HI Flo…Read more

]]> 6a6cbb61874d6cad707efe8be5a5e1b3 flynled replied to the topic OILED PELLETS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/oiled-pellets-d79/#post-78794 Sat, 01 Aug 2009 22:18:29 -0400 quote mamcrackin:quote what:Some say to wash the pellets in dish soap first.

I just dump the whole tin in a ziplock, squirt a bit of oil in and mix it all around.
The next day I dump them on paper towels to soak the excess off.

Using FP-10 right now. It doesn’t take much.

I rememeber that some swore by DynaLube. Don’t remember which…Read more

]]> 56a1cbd7896ef1aa7988b46df8e1fba2 flynled replied to the topic OILED PELLETS in the forum Talon/Talon SS https://talonairgun.com/forums/topic/oiled-pellets-d79/#post-78770 Sat, 01 Aug 2009 16:09:18 -0400 quote jkaleido:For example, Power Pellet Lube

or Shooter’s Choice FP-10 Lubricant Elite

😉 😉 😉

Thanks guys ! Iam going on a hunt….Iam trying to get started on the right track.

]]> e1e1dc2600b53d244c7eb055701b05ac flynled replied to the topic SS WOULD NOT FIRE in the forum Talon/Talon SS https://talonairgun.com/forums/topic/ss-would-not-fire/#post-78758 Sat, 01 Aug 2009 12:46:07 -0400 quote FLYNLED:First day to use it,I sighted scope ok,maybe shot a dozen rounds through it off a full tank…12 oz.
I tried firing it right before dark…..it click ! didnt fire….pellet still in the breech ,I pushed the pellet out through the muzzle…tried again…..still the same thing…whats up with that ?

After the pellet is placed in the…Read more

]]> 2c0c721a77151b51dd55c212df63c4d0 flynled replied to the topic SS WOULD NOT FIRE in the forum Talon/Talon SS https://talonairgun.com/forums/topic/ss-would-not-fire/#post-78747 Sat, 01 Aug 2009 05:25:08 -0400 quote sawtime:wtf does that mean?

No left here 😕 😕 😕 😕 😕 😕

SAW

sorry man,I mean the starling on the wire…cant stand um !

]]> 65bf9fa0531d923d7767f12edaf8afb9 flynled replied to the topic SS WOULD NOT FIRE in the forum Talon/Talon SS https://talonairgun.com/forums/topic/ss-would-not-fire/#post-78744 Sat, 01 Aug 2009 05:17:38 -0400 quote sawtime:so ya have a co 2?
crackin will get to ya, he is the man on that shit

SAW

I do alot of what your doin over on the left…I hate those beastards !

]]>