Talonairgun | fusion | Activity https://talonairgunforum.com/members/fusion/activity/ Activity feed for fusion. Wed, 29 Apr 2026 16:09:21 -0400 https://buddypress.org/?v= en-US 30 hourly 2 a78f7e66953b81089a2f557aaacfd97f fusion replied to the topic optimum speed in the forum General Chat https://talonairgun.com/forums/topic/optimum-speed/#post-104274 Sat, 10 Apr 2010 17:25:18 -0400 Cheers SS. Just trying to speed setting the rifle up. How much do groups open up past the 900? I spent most of today playing with the rifle. Needed to try It with a weaker spring and lighter hammer but I’ve misplaced my torx bits so couldn’t! It’s eating air as It Is. Groups weren’t too bad though with the light pellets @ 25yds.

]]> d114ceffa02d1d9aec4ba900af6dab76 fusion replied to the topic FOR THE UK GUYS in the forum General Chat https://talonairgun.com/forums/topic/for-the-uk-guys/#post-98582 Sun, 07 Feb 2010 10:51:13 -0400 quote gimmick:Nice to see H&N keep their name the same 🙂

LOL 😆

]]> c52105989812308ec96f1073032c6d21 fusion replied to the topic CO2 Adaptor and a power drill... in the forum Mods/Machinists https://talonairgun.com/forums/topic/co2-adaptor-and-a-power-drill/#post-91282 Mon, 30 Nov 2009 14:32:18 -0400 Wouldn’t of thought you would see much gain If any TBH mate. The reg controlls how much air Is In that prechamber so an extra hole won’t do much I would of thought.

]]> 3349c86a2e542c5c23bcb08042548ce0 fusion replied to the topic Look what I got for free and you can too..... in the forum General Chat https://talonairgun.com/forums/topic/look-what-i-got-for-free-and-you-can-too/#post-89046 Thu, 12 Nov 2009 22:53:38 -0400 Theoben recomend moly 33. BSA may also, I can’t remember. Thanks for the heads up anyway Mam 😉 I’ll try get some for myself.

]]> 27841ab90443fae95ecd65b9f4b27bad fusion replied to the topic Regulators? in the forum General Chat https://talonairgun.com/forums/topic/regulators-d91/#post-87607 Mon, 26 Oct 2009 19:58:09 -0400 quote Flannelmeister:I emailed/contacted both companies via their websites asking some questions about their products.

JDS was a little brusque and not very helpful and Airhog didn’t even have the courtesy to reply.

So, neither of them are getting my money.

Tried expert HPA?

]]> e8c5f0c25d92d450fe64fc767906fa68 fusion replied to the topic Our new "Codo" in the forum Mods/Machinists https://talonairgun.com/forums/topic/our-new-quot-codo-quot/page/3/#post-86409 Thu, 15 Oct 2009 17:31:53 -0400 quote synopsys:And finish the Edge and the “regulator” and the BKL mounts… Its been over a year… 😯

I’ve seen the Edge over here In the flesh. I can’t say If It was a working model or not. I never bothered enquiring as It doesn’t interest me but just thought I’d let you know 🙂

]]> 8a1b566fa79e075bad6b04fb8ea9049e fusion replied to the topic Correcting barrel run out error? in the forum Mods/Machinists https://talonairgun.com/forums/topic/correcting-barrel-run-out-error/#post-85851 Sun, 11 Oct 2009 20:01:56 -0400 Tough too, Sounds good 8) Just need to get saving now till I can afford one 🙁

]]> fd75d8c344258d1e5a366b640dac3e94 fusion replied to the topic Correcting barrel run out error? in the forum Mods/Machinists https://talonairgun.com/forums/topic/correcting-barrel-run-out-error/#post-85846 Sun, 11 Oct 2009 19:15:31 -0400 It’s taken a while and yeah, I’m just pleased to have found It at last 😆 I’d only heard of the MTC on the forums but went to a gamefair and had a look through one and was blown away at the quality of optics. I looked through some bushnells too, Not the 6500 series as they are out of my price range and to me the MTC was better. I’m sure I…Read more

]]> 526a4b9c68b818091a4be316765aa87e fusion replied to the topic Correcting barrel run out error? in the forum Mods/Machinists https://talonairgun.com/forums/topic/correcting-barrel-run-out-error/#post-85828 Sun, 11 Oct 2009 16:03:38 -0400 Well the other scope Is a go! 🙂 The conditions had changed alot since earlyer and there was a heavy cross wind so I’m pleased that 3 out of the 5 pellets hit the bull. I’ll be out again later or even tomorrow If the conditions are better to see what the rifle can do. I’m suprised I managed to kill anything with It actually seen aswell the scope…Read more

]]> 31656e9d2ba25f45927cea2bba62df28 fusion replied to the topic Correcting barrel run out error? in the forum Mods/Machinists https://talonairgun.com/forums/topic/correcting-barrel-run-out-error/#post-85823 Sun, 11 Oct 2009 14:33:45 -0400 Yeah I’m running the tri rail only reason Is that I’m also running those overly large regulated HPA tanks so It’s a terrable position to shoot In without It. Even with the tri rail i’m using high mounts and that’s only just high enough.

Well that was easyer than I thought. Hawke scope on the S400 = not good. Suppose It could be good In that I…Read more

]]> 70a89a36acf08ed5a599afecf56153f9 fusion replied to the topic Correcting barrel run out error? in the forum Mods/Machinists https://talonairgun.com/forums/topic/correcting-barrel-run-out-error/#post-85820 Sun, 11 Oct 2009 14:17:44 -0400 Thanks Metal head. I’ve just put the scope that was on the airforce (hawke 6.5-20×50) onto the trusty S400 so will rattle a few shots off now and see how we get on. If I’m getting good groups I’ll try the scope that was on the S400 on the Airforce. It’s only a cheapy 4-12×40 but I’ve never had to rezero that once while It’s been on the S400 and…Read more

]]> 53ad00fd2687e357cfa03eb43d8c6ae4 fusion replied to the topic Correcting barrel run out error? in the forum Mods/Machinists https://talonairgun.com/forums/topic/correcting-barrel-run-out-error/#post-85813 Sun, 11 Oct 2009 11:23:27 -0400 Here’s some I’ve just ran off. As you can see there pritty shit! All groups are 5 shots (even though there’s only 2 pellets on the 45yd target 😆 ) All targets have the 1 screwhole at the top as this Is how I fix them to my back stop. Range Is at the top left corner apart from 1 target which Is my zero target. Fresh fill of 2900 PSI.

Here’s…Read more

]]> 29455c25c9661dbbfefc3cb1dd39e72b fusion replied to the topic lock tight in the forum Mods/Machinists https://talonairgun.com/forums/topic/lock-tight/#post-84953 Sat, 03 Oct 2009 15:23:47 -0400 quote brutus:Also have you noticed the regulated setup is loads louder then the normal bottle. Mine really makes a bang when I shoot. NOT the sound barrier. I think it is an eco from inside the regulator.

On the stealth? I’ts been that long since I’ve shot It unregd I can’t really remember. I’ll let you know when I try my new valve, once It’s…Read more

]]> ee70ce905052adb67138146374aaaf31 fusion replied to the topic lock tight in the forum Mods/Machinists https://talonairgun.com/forums/topic/lock-tight/#post-84950 Sat, 03 Oct 2009 14:21:53 -0400 Is there a hammer preload adjuster on the AW? I’ve had my reg re set on the rapid and It’s come back over what I wanted so I just adjusted the preload.

Sounds good 😉 I seem to be doing nothing but fixing leaks on this 😈 rapid!

]]> 42b3687c83f926edec216b0634a7b94c fusion replied to the topic lock tight in the forum Mods/Machinists https://talonairgun.com/forums/topic/lock-tight/#post-84948 Sat, 03 Oct 2009 11:25:52 -0400 You settled on the air ranger In the end then B? How Is she finding It?

]]> 9b7715ede11bb8dce720530417e98dd2 fusion replied to the topic New core in the forum Shrouds and Moderators https://talonairgun.com/forums/topic/new-core/page/2/#post-84189 Sat, 26 Sep 2009 09:56:32 -0400 nice work yel0 8)

]]> 7227f8584746d3c130c0e862486ee43e fusion replied to the topic Soup Of The Day "Airhog regulator testing with a side o in the forum Mods/Machinists https://talonairgun.com/forums/topic/soup-of-the-day-quot-airhog-regulator-testing-with-a-side-o/#post-82852 Mon, 14 Sep 2009 21:23:54 -0400 quote Langnasen:quote 80 GRIT:Can all the components be purchased at once from AirHog? Thanks again.

😆 😆 😆

If you don’t mind giving them your money and then waiting close on three months (and still waiting).

You still not had It 😯

]]> bfd389c9dfeeb3ec52ff8a0558b50fd9 fusion replied to the topic Hunting partner in the forum General Chat https://talonairgun.com/forums/topic/hunting-partner/#post-82851 Mon, 14 Sep 2009 21:15:32 -0400 quote brutus:In other words Don’t piss off a slovak with a rifle…

Just don’t piss off a woman that knows how to shoot 😆

Let us know how you get on with them coneys 😉

]]> 59dfda8d18b8a776f330fe7d115d1405 fusion replied to the topic Hunting partner in the forum General Chat https://talonairgun.com/forums/topic/hunting-partner/#post-82828 Mon, 14 Sep 2009 18:02:00 -0400 Something that she won’t be able to hit a barn door with, Loose interest and give up meaning you get more time alone In the field 😆 Remember when she can shoot you better be on your best behaviour all the time! 😆

I’ve heard good stuff about the HW100 off a few people but I’ve never tried one. I have shot the S200 but I may be abit small…Read more

]]> f264d1ebe6a31ccffe322975de1699cb fusion replied to the topic Need advice (England hunting advice) in the forum General Chat https://talonairgun.com/forums/topic/need-advice-england-hunting-advice/#post-82685 Sun, 13 Sep 2009 19:48:51 -0400 I don’t think you’re likely to get savaged by old Brock Brutus. There more likey to flee as soon as they sense you and as you say, Getting them In the light they soon scarper.

They are very tough critters too as has been said. Long time ago they used to put terriers to ground on them. Some of the dogs had bad wounds and some would be found with…Read more

]]> a71a93ff652592928f80347859ed70a8 fusion replied to the topic 800cc bottle for Condor valve does it exist? in the forum General Chat https://talonairgun.com/forums/topic/800cc-bottle-for-condor-valve-does-it-exist/#post-81449 Wed, 02 Sep 2009 19:48:54 -0400

]]> 0b1f147b995aa4c5dfbaa901f107a4dc fusion replied to the topic 3/8" or 1/4" drive Imperial hex keys. in the forum General Chat https://talonairgun.com/forums/topic/3-8-quot-or-1-4-quot-drive-imperial-hex-keys/#post-81200 Sun, 30 Aug 2009 08:45:09 -0400 Try maplin. They do a set In a little green plastic case and I use the ones from In there. Alot are star shaped but they are the correct fit. I can’t remember If all the bits I use are from that set but you’ll need a seperate allen key to undo the bottle collar In the frame. I just snaded down one of mine I allready…Read more

]]> 1d94f0f67e34fbd6809258cddc79a56a fusion replied to the topic what caliber would suit me best? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/what-caliber-would-suit-me-best/page/4/#post-80976 Thu, 27 Aug 2009 16:43:39 -0400 quote dave_424:Thanks however I have tried that before and it wont let me register, it just says registration has been disabled by the administrator

Dave

You been banned then 😆 Get a new hotmail email addy 😉

12″ barrel will give you the power you require with the modded valve but your shot count will be way low. 10-20 odd at the most…Read more

]]> fdd5bb6964e3fea6c5f7a1de3c7a83c2 fusion replied to the topic what caliber would suit me best? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/what-caliber-would-suit-me-best/page/2/#post-80909 Wed, 26 Aug 2009 22:43:02 -0400 Man I’m a slow typer 😆
BSA blanks are around 50-60 quid, that’s If you can get hold of one. Don’t go skimping on the machinist to the work for you. It may seem cheaper but the amount of hastle In the long run won’t be worth It!

]]> 3056aff6d1a6dfbec7bd7d415beaee24 fusion replied to the topic what caliber would suit me best? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/what-caliber-would-suit-me-best/page/2/#post-80907 Wed, 26 Aug 2009 22:37:38 -0400 I’ve been looking for a frame for a while Pabs. I’ve built up that many spare parts In under a year i should have enough to build another 2 complete rifles 😆

Are the storm and stealth frames the same? You could always buy the stealth and then upgrade the barrel as and when a bigger one comes around. In fact there’s one on ebay right now.…Read more

]]> 31a05cfbd33ccd94aefb21e589c8b479 fusion replied to the topic what caliber would suit me best? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/what-caliber-would-suit-me-best/page/2/#post-80899 Wed, 26 Aug 2009 21:59:33 -0400 Buy a bigger bored 1 piece stem to use as all the gunpower stems have the splines at the bottom. The valve spring Is fine. Some replace with a weaker spring but TBH I don’t think there’s much wrong with the stock one. Just flatten the edges so It sits flat against the valve seal and spring retainer. It’s easy enough to see when you have the valve…Read more

]]> 422f69089bfe3de26dd4757714040675 fusion replied to the topic what caliber would suit me best? in the forum Talon/Talon SS https://talonairgun.com/forums/topic/what-caliber-would-suit-me-best/page/2/#post-80847 Wed, 26 Aug 2009 16:27:08 -0400 If your looking to use the least amount of air possible you may aswell get a 24″ barrel. They use air much more effectively than the 12 and 18″ barrels. If you still want more shots, upgrade to a 800cc air cylinder.

The stealth valves are fittred with restrictors and made to shoot low power but they can be modded to push high powers fairly…Read more

]]> 5c34789a499c99da913ed17f5d51873a fusion replied to the topic How to remove the TANK COVER in the forum General Chat https://talonairgun.com/forums/topic/how-to-remove-the-tank-cover/#post-80815 Wed, 26 Aug 2009 06:18:54 -0400 quote TerrySS:I too was able to take off and replace a cover on an 800cc tank, but, it wasn’t easy. 😕 How many 800cc tanks are there out there? I have not seen any except mine.
Terry

I have one but have been auable to remove the cover.

]]> e1a31532100629199d3d23ec4535d66e fusion replied to the topic How to remove the TANK COVER in the forum General Chat https://talonairgun.com/forums/topic/how-to-remove-the-tank-cover/#post-80704 Tue, 25 Aug 2009 18:18:11 -0400 LOL @ Pabs 😆

]]> 914c63e862a5bbf0bb2d5dd0b7d843b1 fusion replied to the topic GOT REAR ENDED ON THE WAY BACK FROM RANGE in the forum General Chat https://talonairgun.com/forums/topic/got-rear-ended-on-the-way-back-from-range/page/2/#post-80613 Mon, 24 Aug 2009 21:16:43 -0400 I bet It would work If they were close too as long as they havn’t got your plate. I was watching one of these police camera action type programs where they were following a bike. They were just about to pull him over when he guns It, Flys over a roundabout, overtakes a few cars and Is gone. They didn’t even bother trying to catch up with him as It…Read more

]]> 7e5668a3e49246aff2a47687e4766425 fusion replied to the topic GOT REAR ENDED ON THE WAY BACK FROM RANGE in the forum General Chat https://talonairgun.com/forums/topic/got-rear-ended-on-the-way-back-from-range/page/2/#post-80604 Mon, 24 Aug 2009 18:33:53 -0400 My mum got done for doing 33 In a 30 by a cop running hand held lidar. He got lucky as she usually drives like a snail 😆

The scammer vans are a PITA but you can still defend yourself against them and there the most exciting type to find and defeat 😉

]]> 899224211635cd766140c790cf231049 fusion replied to the topic GOT REAR ENDED ON THE WAY BACK FROM RANGE in the forum General Chat https://talonairgun.com/forums/topic/got-rear-ended-on-the-way-back-from-range/#post-80595 Mon, 24 Aug 2009 16:02:27 -0400 Don’t hold back will ya Brutus 😆 You should get some countermeasures to stop them scamming you. I quite like finding the speed traps before they find me 8) 🙂

]]> 288dd1ac729a43cb755b9c324a9e2809 fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/page/2/#post-80542 Sun, 23 Aug 2009 21:34:57 -0400 I have a tank here actually. I bought It years ago and never used It. I bought a 207 bar one 😳 Good job It was only cheap 😆

I may give It ago LMTSS when I get a spare pump. I don’t know how long that will be. I like a bargain…. In other words I’m just a tight bastard 😆

]]> cf90d96bc1f4b1e965bdcc76cb4cf4c5 fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/page/2/#post-80539 Sun, 23 Aug 2009 21:24:37 -0400 I’m looking for a spare pump actually. My current axor pump i have had for years and had no problems at all with It. I paid 60 quid and that was perhaps 5 or even more years ago now. Pritty good value I think. I havn’t even ahd to replace a seal.

I suppose I could try and get a custom microbore fill line made up that can connect the 2 pumps so…Read more

]]> 377890df5e3c06cbae1b5a95a47c6107 fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/#post-80537 Sun, 23 Aug 2009 21:09:41 -0400 You’re probably right Pabs but that 200 I could spend on more toys 😆 I always seem short on cash (don’t we all 😆 ) so 200 Is too much for me. Then I have the hastle of filling, test etc. I don’t mind the pumping to be fair. Filling by bottle will be much easier yeah, but I need the exercise before I develop too much of a gut 😆 It’s the…Read more

]]> a07389b29dd2f6e8f68efc773b514f16 fusion replied to the topic Check out these sub-human murdering scum... in the forum Off Topic https://talonairgun.com/forums/topic/check-out-these-sub-human-murdering-scum/page/2/#post-80528 Sun, 23 Aug 2009 18:10:08 -0400 I must of missed that post, thanks. All seems abit strange to me 😕

]]> 0c4b3dc8edf792a1849ca57baaea0eb7 fusion replied to the topic Check out these sub-human murdering scum... in the forum Off Topic https://talonairgun.com/forums/topic/check-out-these-sub-human-murdering-scum/#post-80525 Sun, 23 Aug 2009 17:03:30 -0400 Did he die then Lang? Even If he didn’t It’s a very savage attack. I’ve seen a vid of some drunk scotish lads fighting. The fuzz turn up well outnumbered and try to break I up. Next thing this one bloke runs across the camera man and flying head butts this one copper. The coppers out cold right away and apparently he was paralyzed due to his…Read more

]]> edec6f4c4a2906806f6389ace742daea fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/#post-80523 Sun, 23 Aug 2009 16:43:37 -0400 I think I’ll have to call at the local gun shop and buy some 5.50’s. I’m using 5.52’s now and they are a very tight fit. I think I’m damaging them In some way getting them In as the groups I’ve just shot at 35 yards are pritty crap! I was almost getting 2 seperate groups. 1 smack on the bull and another about an inch off bull 😕

I thought I’d…Read more

]]> cd1235b612628e2144fb41109e9386a0 fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/#post-80517 Sun, 23 Aug 2009 15:45:20 -0400 Strange. Could be anything but all I know Is Biz Mags are real tight!

]]> bd6ec4116650eea3a7d37090f7e4bc43 fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/#post-80509 Sun, 23 Aug 2009 09:08:19 -0400 Thanks B. I’ve got some other ideas first before I go messing with the reg but thanks for the offer and I may take you up on It after I have tried the other (easyer) ideas.

I found the biz mags are really hard to fit In. Perhaps It’s just because my barrel Is brand spanking and needs to be worn In abit. I’ve probably only fired around 100 shots…Read more

]]> aba7ad237d7f8b8eedeef8263329fa71 fusion replied to the topic Check out these sub-human murdering scum... in the forum Off Topic https://talonairgun.com/forums/topic/check-out-these-sub-human-murdering-scum/#post-80479 Sat, 22 Aug 2009 18:03:46 -0400 quote airtight_python:It’s wrong what went one here, but how are we sure this guy died from the beating?

You can’t. One of the disadvantage with video – You can only see what was filmed. I didn’t even watch It all. I saw the guy looking back on the blood trail across the floor and that was enough for me, Just sickening! Who knows what happend…Read more

]]> 434c74a89dc9c24f69eacc3ad77ccedc fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/#post-80473 Sat, 22 Aug 2009 17:22:52 -0400 Will the reg mind being played with B? I know some don’t and then go all over the place and that’s the last thing I want. I think an extra .2-.4 of a mm will do me but I’ve got some other options to try first save draining the whole tank and then refilling by a hand pump 😆 Where do you get the shims from too?

I was looking to get a bottle but…Read more

]]> c2aa306e1a8dd84aa94f037a3b380703 fusion replied to the topic Check out these sub-human murdering scum... in the forum Off Topic https://talonairgun.com/forums/topic/check-out-these-sub-human-murdering-scum/#post-80461 Sat, 22 Aug 2009 14:21:20 -0400 There’s not much I have watched or seen and wished I hadn’t but that was one thing. When someone’s down and not going anywhere that’s It for me, you give up beating them. They can’t defend them selves and you can really do some damage (as you can see from the vid) . I’ve seen guys get there head stamped on in real life so to speak and It aint nice…Read more

]]> 836c0a0f13a1245148d600b74992223b fusion replied to the topic FAO those running regulators. in the forum General Chat https://talonairgun.com/forums/topic/fao-those-running-regulators/#post-80455 Sat, 22 Aug 2009 12:49:21 -0400 My spring Is a slightly uprated one. I wouldn’t say It’s mega powerfull but It’s a basic one off Drum to replace the stock spring. Hammer is aprrox 65g. I’m not after mega power, just something for all occasions 😉 I’ve dropped Lang a PM to see If I can lend one of his valves If he has one spare. I know he told me they work differently to the…Read more

]]> 5a13c983ce936accb8b060ebd2508c76 fusion replied to the topic Valve Spring in the forum General Chat https://talonairgun.com/forums/topic/valve-spring/#post-80451 Sat, 22 Aug 2009 08:03:04 -0400 Will do. Consistency doesn’t seem as good so I’ll be having a play later with the valve and preload. I’ve removed a spring from the trigger too and It’s made It much lighter 😉

]]> f87dd81310d7cea41a5c287182a1c7e3 fusion replied to the topic Valve Spring in the forum General Chat https://talonairgun.com/forums/topic/valve-spring/#post-80384 Fri, 21 Aug 2009 09:24:07 -0400 What’s up with yours B? Have you tried ringing gunpower? There usually quite good when you get through but have a tenner minimum order. They did last time I ordered anyway.

BTW B, I got my 24″ (or just less than 24″ in the end, long story) the other day. First tests look good 😉

]]> aa5dcf53cbec15db88c08fa2c2cb14f1 fusion replied to the topic spacer set up for talon ss/stealth? in the forum Mods/Machinists https://talonairgun.com/forums/topic/spacer-set-up-for-talon-ss-stealth/#post-80383 Fri, 21 Aug 2009 09:10:35 -0400 quote pablouk:As brutus says, get rid of the hammer slap mod. It sounds like it could be source of your variable fpe.

Yep, It’s been proved before that the hammer slap mod can reduce power. A hybrid hammer from Drum does quieten the rifle down a touch aswell as improving consistency.

]]> 21438adf2c52596883a2b499c63cbce3 fusion replied to the topic regulator in the forum Talon/Talon SS https://talonairgun.com/forums/topic/regulator-d9/page/2/#post-79984 Sat, 15 Aug 2009 09:14:37 -0400 You should of said I would of given you a copy.
221.4 grn pellets – Dayyymn 😯 😆

]]> 33780188f54b288bf862d1b88647ab96 fusion replied to the topic I have not seen this style valve before. in the forum General Chat https://talonairgun.com/forums/topic/i-have-not-seen-this-style-valve-before/#post-79924 Fri, 14 Aug 2009 17:55:49 -0400 Where did you find the pic and how old Is It? It looks like one of the early style airforce 1 piece valves – just In black. I have one and It’s a silver finish so perhaps that one In the pic has just been sprayed. The early valves were ready O ring modded but apparently not very well. They also had alignment issues too I’m led to believe.

]]> 4e6b14738a4933a9c0645334ba2956ab fusion replied to the topic Valve doesnt close aaahhh in the forum Talon/Talon SS https://talonairgun.com/forums/topic/valve-doesnt-close-aaahhh/#post-79830 Thu, 13 Aug 2009 20:23:42 -0400 As pab says, sounds like the spring retainer has worked loose. Have you been playing with the hammer and spring recently as too much load can keep the valve open. It doesn’t usually close up again though – Rather drains the whole tank In about 5 seconds 😆

]]>